• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.639-646
• /
• 2010

The APAM's quantitative effectiveness and comparative study in preventing and treating pressure ulcer has not been sufficiently evaluated mainly because of uncertainty of pressure load input and lack of interpretation of dynamic perfusion recovery characteristics of soft tissue. The purpose of this paper was to quantify and analyze the alternating pressure characteristics of APAM as a preventive measure for pressure ulcers. To quantify the alternating load to human body, we introduced alternating pressure profile concept and developed parametric model of the profile. Regarding pressure level and cycle time, 3 global and 7 local periodic parameters were used to define the profile such as light, standard, typical and heavy duty profile shape. Pressure impulse ratio of light duty is the lowest but pressure fluctuation is significantly high. For the same duty shape, contact conditions are changed with alternating cycle time and more dramatically in shorter alternating cycle time conditions. We can conclude that if we use shorter alternating cycle time on APAM's operation we can get more positive effects regarding to inflated contact time condition. We proposed the quantitative methods on tissue viability study of external loading by simultaneous measurement of interface pressure and tissue perfusion with proper alternating pressure profile conditions.

• The Korean Journal of Applied Statistics
• /
• v.25 no.1
• /
• pp.163-181
• /
• 2012

This paper studies the effect of job training for non-regular employees in the Korea labor market. Using an economically active population data set of statistics Korea, we apply a non-parametric matching and sensitivity analysis method to measure the effect of the training for non-regular employees and to look for the impact of an unobservable variable or confounding factor in regards to the selection effect and outcome effect. In the our empirical results, we conclude that the effect of the training for non-regular employees has a better employment effect for getting a regular job rather than a wage effect; in addition, the impact of unobservable variables or confounding factors do not exercise a statistically strong influence on the baseline ATT.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.2
• /
• pp.94-103
• /
• 2008

This study measured technology transfer efficiency for public institutes. The study made use of DEA being one of the non-parametric linear programming to evaluate technology transfer efficiency for public institutes and to measure technology efficiency, pure technical efficiency and scale efficiency. The measurement of the technology transfer efficiency for public institutes was as follows: The cause of the technology transfer inefficiency was affected by pure technical inefficiency more than by scale inefficiency. Public institutes' RTS(Return To Scale) value varied depending upon the features of the organizations than the features of the regions. Public research institutes' RTS value is more effective than universities' RTS value. We compared the RTS group with the RTS of Projected DMU groups. The RTS group had constant returns to scale effect while the RTS of the Projected DMU had increasing returns to scale effect. The technology transfer efficiency of public institutes varied depending upon the features of the organizations and regions : The technology transfer efficiency of public institutes were as follows : public research institutes at the metropolitan area, public research institutes at the local areas, universities at the metropolitan area and universities at the local areas. In other words, the technology transfer efficiency was affected by organizational characteristics more than by regional characteristics at the place where public institutes were located.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.826-839
• /
• 2014

Fire is a continuous threat to FPSO topside modules as large amounts of oil and gas are passing through the modules. As a conventional measure to mitigate structural failure under fire, passive fire protection (PFP) coatings are widely used on main structural members. However, an excessive use of PFP coatings can cause considerable cost for material purchase, installation, inspection and maintenance. Long installation time can be a risk since the work should be done nearly at the last fabrication stage. Thus, the minimal use of PFP can be beneficial to the reduction of construction cost and the avoidance of schedule delay. This paper presents a few case studies on how different applications of PFP have influence on collapse time of a FPSO module structure. A series of heat analysis and thermal elasto-plastic FE analysis are performed for different PFP coatings and the resultant collapse time and the amount of PFP coatings are compared with each other.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3E
• /
• pp.90-98
• /
• 2005

Enhanced approach using computational and experimental method is proposed and performed to describe very well the behavior of loudspeaker than conventional method. Proposed procedure is composed of four parts. First, Thiele-Small parameters for test loudspeaker are identified by an electrical impedance method like as a delta mass method. Second part includes the processes to measure physical properties. Physical data like masses and thicknesses of loudspeaker's components are measured by an electrical precision scale and a digital vernier caliper. Third, the identified Thiele-Small parameters are proposed to be used as load boundary conditions for vibration analysis instead of electromagnetic circuit analysis to get a driving force upon bobbin part. Also, these parameters and physical data are used to modify physical properties required for computation to accommodate simulated sound pressure level with measured one for loudspeaker enclosure system. These data like as Young's modulus and thickness for a diaphragm are required for vibration analysis of loudspeaker but not measured accurately. Finally, it was investigated that simulated sound pressure level with full acoustic modeling including an acoustic port for test loudspeaker agreed with experimental result very well in the midrange frequency band(from 100 Hz to 2,000 Hz). In addition, several design parametric study is performed to grasp acoustical behaviors of loudspeaker system due to variations of diaphragm thicknesses and shapes of dust cap.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.4
• /
• pp.367-378
• /
• 2016

Recently, it was reported that the role of mitochondria-reactive oxygen species (ROS) generating pathway in cisplatin-induced apoptosis is remarkable. Since a variety of molecules are involved in the pathway, a comprehensive approach to delineate the biological interactions of the molecules is required. However, quantitative modeling of the mitochondria-ROS generating pathway based on experiment and systemic analysis using the model have not been attempted so far. Thus, we conducted experiments to measure the concentration changes of critical molecules associated with mitochondrial apoptosis in both human mesothelioma H2052 and their ${\rho}^0$ cells lacking mitochondrial DNA (mtDNA). Based on the experiments, a novel mathematical model that can represent the essential dynamics of the mitochondrial apoptotic pathway induced by cisplatin was developed. The kinetic parameter values of the mathematical model were estimated from the experimental data. Then, we have investigated the dynamical properties of this model and predicted the apoptosis levels for various concentrations of cisplatin beyond the range of experiments. From parametric perturbation analysis, we further found that apoptosis will reach its saturation level beyond a certain critical cisplatin concentration.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.1
• /
• pp.11-16
• /
• 2018

This research examines the alternative ways of estimating the coefficient of non-diversifiable risk, namely beta coefficient, in Capital Asset Pricing Model (CAPM) introduced by Sharpe (1964) that is an essential element of assessing the value of diverse assets. The non-parametric methods used in this research are the robust Least Trimmed Square (LTS) and Maximum likelihood type of M-estimator (MM-estimator). The Jackknife, the resampling technique, is also employed to validate the results. According to finance literature and common practices, these coecients have often been estimated using Ordinary Least Square (LS) regression method and monthly return data set. The empirical results of this research pointed out that the robust Least Trimmed Square (LTS) and Maximum likelihood type of M-estimator (MM-estimator) performed much better than Ordinary Least Square (LS) in terms of eciency for large-cap stocks trading actively in the United States markets. Interestingly, the empirical results also showed that daily return data would give more accurate estimation than monthly return data in both Ordinary Least Square (LS) and robust Least Trimmed Square (LTS) and Maximum likelihood type of M-estimator (MM-estimator) regressions.

• Journal of East-West Nursing Research
• /
• v.14 no.1
• /
• pp.36-43
• /
• 2008

Purpose: This study was conducted for an evidence-based nursing intervention on bed rest period after puncture, by confirming whether there was a difference in scores of headache and back pain between the 1-hour bed rest group and the 6-hour bed rest group following lumbar puncture in patients with leukemia. Method: The subjects were 45 inpatients of the department of hematology at a general hospital in Seoul, from January 1 to March 31, 2005. There were 21 patients in the 1-hour bed rest group and 24 patients in the 6-hour bed rest group. A graphic rating scale was used to measure headaches and back pains. Collected data were analyzed with SPSS 12.0. Non- parametric statistics were used to analyze the data. Results: There was no significant difference between the 1-hour bed rest group and the 6-hour bed rest group in the headache level and back pain level. Conclusion: Therefore, it is considered that a long period of bed rest over 6 hours after lumbar puncture is not a necessary nursing intervention, and repeated studies are required to confirm the result.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.425-438
• /
• 2015

This study proposes a three-stage model of R&BD performance which captures commercialization outcomes as well as conventional R&D performance. The model is composed of three factors : inputs (R&D budgets and researchers), outputs (patents and papers), and outcomes (technical fees, products sales, and cost savings). Three stages are defined for each transformation process between the three factors : efficiency stage from input to output (stage 1), effectiveness stage from output to outcome (stage 2), and productivity stage from input to outcome (stage 3). The performance of each stage is measured by data envelopment analysis (DEA). DEA is a non-parametric efficiency measurement technique that has widely been used in R&D performance measurement. We measure the performance of 171 projects of 6 public R&BD programs managed by Seoul Business Agency using the proposed three-stage model. In order to provide a balanced and holistic view of R&BD performance, the R&BD performance map is also constructed based on performance of efficiency and productivity stages.

• Structural Engineering and Mechanics
• /
• v.90 no.1
• /
• pp.97-106
• /
• 2024

This paper presents a significant contribution to aided design by conducting an analytical examination of geometric links with the aim of establishing criteria for assessing an analogy measure of the extrinsic geometric and kinematic characteristics of the Variable Compression Ratio (VCR) engine with a Geared Mechanism (GBCM) in comparison to the existing Fixed Compression Ratio (FCR) engine with a Standard-Reciprocating Crankshaft configuration. Employing a mechanical approach grounded in projective computational methods, a parametric study has been conducted to analyze the kinematic behavior and geometric transformations of the moving links. The findings indicate that in order to ensure equivalent extrinsic behavior and maintain consistent input-output performance between both engine types, precise adjustments of intrinsic geometric parameters are necessary. Specifically, for a VCR configuration compared to an FCR configuration, regardless of compression ratio and gearwheel radius, for the same crankshaft ratios and stroke lengths, it is imperative to halve lengths of connecting rods, and crank radius. These insights underscore the importance of meticulous parameter adjustment in achieving comparable performance across different engine configurations, offering valuable implications for design optimization.