• Communications of the Korean Mathematical Society
• /
• v.10 no.2
• /
• pp.483-490
• /
• 1995

A parametric cubic spline interpolating at fixed number of nodes is constructed by formulating a parametric cubic $g^2$ B-splines $S_3(t)$ with not equally spaced parametric knots. Since the fact that each component is in $C^2$ class is not enough to provide the geometric smoothness of parametric curves, the existence of $S_3(t)$ oriented toward the modified second-order geometric continuity is focalized in our work.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.3-10
• /
• 1990

Hull form can be described numerically by two approaches, one is to describe a hull form with a set of curves("curve approach"), and the other is to describe it with surfaces directly("surface approach"). This paper describes the numerical definition scheme of hull form using curve approach method which defines the hull form by a set of curves consisting of 2-dimensional transverse section curves and 3-dimensional longitudinal curves. A set of curves in the hull form definition scheme is described by the modified cubic spline which modified the general parametric cubic spline in order to ensure a very smooth curvature distribution within the curve segment even though a curve segment has large tangent angle at its end points. Illustrative examples are given showing the application of the method to represent the hull form of SWATH ship and oceanographic research vessel. Also, examples for hull form transformation are shown by using this method connected with transformation technique.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.758-765
• /
• 1999

Shape-preserving property is the important method that controls the complex free form curve/surface. Interpolation method for the existed Shape-Preservation had problems that it has needed the minimization of a curvature-related functions for calculating single-valued data. Solving this problem, in this paper, it proposed to the algorithm of generalizing C piecewise parametric cubic that has shape-preserving property for both Single-value data and Multivalue data. When there are the arbitrary tangents and two data, including shape-preserving property, this proposed method gets piecewise parametric cubic polynomial by checking the relation between the shape-preserving property and then calculates efficiently the control points using that. Also, it controls the initial shape using curvature distribution on curve segments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.47-52
• /
• 1996

The interpolator is very important in CNC machines. This study proposed a parametric curve interpolator(PCI) which can be used for machining any sculptured surface represented in a parametric form and generates commands for tool motion between CAD data points according to given accuracy demands. The proposed interpolator is superior to the existing linear interpolator in accuracy, feed rate and acceleration continuity. Moreover in comparison to the recently developed cubic spline interpolator, the PCI has the capability of handling higher order parametric curves and also ensures precise tracking in the velocity domain. Results from real time simulations and experiments on open architecture CNC machines equipped with the proposed interpolator are presented to show its practical capagility. It is believed that the combination of the proposed interpolator and the open architecture machine controller further advances the area of command generation which is an important aspect of CAD/CAM.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.600-605
• /
• 2004

In many machines handling lightweight and flexible media such as magnetic tape drives, xerographic copiers and sewing machines, the media must transit an open space. It is important to predict the static and dynamic behavior of the sheets with a high degree of reliability. The nonlinear theory of the dynamic elastica has often been used to a nonlinear dynamic deflection model. In this paper, the governing equation is derived and simulated by the finite differential method. The parametric cubic curve is applied for defining the guide shape. The dynamic contact conditions suggested by Klarbring is used to predict the direction of the flexible media according to the initial velocity and the friction coefficient. The analysis is also compared to the conventional model, showing that after contacting a $45^{\circ}$ wall, the directions of flexible media of two models are different.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.518-529
• /
• 2000

A detailed and thorough parametric study of digital image correlation method is presented. A theoretical background and development of the method were introduced and the effects of various parameters on the determination of displacement outputs from the raw original and deformed image information were examined. Use of the normalized correlation coefficient, the use of 20 to 40 pixels for a searching window side, 6 variables searching, bi-cubic spline sub pixel interpolations and the use of coarse-fine search are some of the key choices among the results of parametric studies. The displacement outputs can be further processed with two dimensional curve fitting for the data noise reduction as well as displacement gradient calculation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.206-212
• /
• 2005

In many machines handling lightweight and flexible media, such as magnetic tape drives, xerographic copiers and sewing machines, the media must transit an open space. It is important to predict the static and dynamic behavior of the sheets with a high degree of reliability. The nonlinear theory of the dynamic elastica has often been used to a nonlinear dynamic deflection model. In this paper, the governing equation is derived and simulated by the finite difference method. The parametric cubic curve is applied for defining the guide shape. The dynamic contact conditions suggested by Klarbring is used to predict the direction of the flexible media according to the initial velocity and the friction coefficient. The analysis is also compared to the conventional model, showing that after contacting a $45^{\circ}$ wall, the directions of flexible media of two models are different.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.547-550
• /
• 2005

In many machines handling lightweight and flexible media, such as automated teller machines and printers, the media must transit an open space. It is important to predict the static and dynamic behavior of the sheets with a high degree of reliability The nonlinear theory of the dynamic elastica has often been used to a nonlinear dynamic deflection model. In this paper, the governing equation is derived and simulated by the finite difference method. The analysis has to include aerodynamic effect for more exact behavior analysis, because the flexible media can be deformed drastically by a little force. Therefore aerodynamic force must be applied to the governing equation. Different results were obtained with and without aerodynamic effect and the resulted show that after contacting circular guide, the directions of flexible media of two cases are different.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.2
• /
• pp.96-108
• /
• 2022

In this paper, we propose a systematic hull form variation technique which automatically satisfies the displacement constraint and guarantees a high level of fairness. This method is possible through multiple parameter correction curves. The present method is to improve the hull form variation method based on parametric modification function and consists of two sub-categories: SAC variation and section lines modification. For SAC variation, the utilization of two B-Spline curves satisfying GC¹ condition led to the satisfaction of displacement constraint and high level of fairness at the same time. Section lines modification methods involves in using two fuctions: the first is the waterplane modification function combining two cubic splines. the other function is the sectional area modification function consisting of 2nd order polynomial over the DLWL(Design Load Waterline) and 3rd order polynomial below the DLWL, This function enables not only the fundamental U-V section shape variation but also systematically modified section lines. The present method is expected to be more useful in the hull form optimization process using CFD compared to the existing method.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.81-92
• /
• 1998

A beam on elasto-plastic foundation modeling of soldier pile and woodlagging tieback walls or anchored walls was developed and tested. An instrumented full scale tieback wall in sand was constructed at the National Geotechnical Experimentation Bite located on Texas A&M University. The experimental earth pressure deflection relationship (p-y curves) was developed from the measurements. The construction sequence was simulated in the proposed method. The conceptual methodology of an anchored wall design was introduced by using the proposed method. The proposed method was evaluated with the measurements of case histories in sand and clay. A parametric research was performed to study the most influencing factors for the proposed method. It is concluded that the proposed method represents a significant improvement on the prediction of bending moments and deflections of the properly designed walls.