• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.281-294
• /
• 2008

synergistic action caused by iodide ions on the corrosion inhibition of aluminium (Al) in 0.5 M HCl in the presence of Azadirachta Indica (AZI) plant extract has been investigated using potintiodynamic polarization and impedance techniques. It is found that AZI extract inhibits the corrosion of aluminium in 0.5 M HCl. The inhibition efficiency increases with the increase in AZI extract concentration, until 24% v/v of AZI extract, then Inh.% is decreased with father increase in AZI extract concentration. The adsorption of this extract in the studied concentration is found to obey Frewendlish adsorption isotherm. The addition of iodide ions enhances the inhibition efficiency to a considerable extent. The increase in Inh.% values in presence of fixed concentration of iodide ions indicates that AZI extract forms an insoluble complex at lower AZI extract concentrations by undergoing a joint adsorption. But at higher concentrations of AZI extract, competitive adsorption is found between iodide ions and the formed complex leading to less Inh.%.The Inh.% decreased in presence of iodide ions with AZI extract than in presence of AZI extract alone at all studied iodide concentrations. The synergism parameter Sq is defined and calculated from surface coverage values. This parameter in the case of AZI extract is found to be more than unity, indicating that the enhanced inhibition efficiency caused by the addition of iodide ions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.29-34
• /
• 1993

In this paper, we used one-dimensional process simulator, SUPREM-II, and two-dimensional device simulator, MINIMOS 4.0 to extract optimal process parameter that can minimize degradation of device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derieved the relationship between process parameter and device characteristics. Here we have presented a method to extract process parameters from design trend curve(DTC) obtained by process and device simulations. We parameters to verify the validity of the DTC method. The experimental result of 0.8 $\mu\textrm{m}$ channel length devices that have been fabricated with optimal that reduces short channel effects, that is, good drain current-voltage characteristics, low body effects and threshold voltage of 1.0 V, high punchthrough and breakdown voltage of 12 V, low subthreshold swing(S.S) values of 105 mV/decade.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.107-116
• /
• 1994

In the manufacturing of VLSI circuits, variations of device characteristics due to the slight differences in process parameters drastically aggravate the performances of fabricated devices. Therefore, it is very important to establish optimal process conditions in order to minimize deviations of device characteristics. In this paper, we used one-dimensional process simulator, SUPREM-II, and two dimensional device simulator, MINIMOS 4.0 in order to extract optimal process parameter which can minimize changes of the device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derived the dependence relations between process parameters and device characteristics. Here, we have suggested a method to extract process parameters from design trend curve(DTC) obtained by these dependence relations. And we have discussed short channel effects and device limitations by scaling down MOSFET dimensions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.611-615
• /
• 1991

A technique for estimation of the hydrodynamic parameter of an underwater vehicle is presented. An extended, augmented Kalman Filter is used to extract the hydrodynamic parameter. Computer generated data were used for the measurement information in lieu of actual run data. The feasibility of identifying values of the hydrodynamic parameter of an underwater vehicle is studied. Computer simulation are done in order to validate the performance of the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.245-248
• /
• 2000

In this paper, we present a high-performance SiGe HBT's RF input impedance parameter extraction method. The SiGe HBT has emitter width of 0.5${\mu}{\textrm}{m}$ and length of 6${\mu}{\textrm}{m}$. S-parameter has been measured with the collector current of 1~3㎃ using on-wafer RF measuring system . The pre-calculation method was used in order to overcome the local minimum problem. This method enabled us to extract a RF(1~10㎓) input impedance parameter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.439-444
• /
• 2016

The method for extracting the SPICE model parameter of Schottky diode under DC forward bias is proposed. A method for improving the accuracy of the SPICE model parameter at various temperatures is proposed. Three analysis steps according to the magnitude of the current is used in order to extract the parameters effectively. At each analysis step, initial parameters are calculated by using the current-voltage equations and the Levenberg-Marquardt analysis is proceeded. To verify the validity of the proposed method, the SPICE model parameters for the BAT45 and FSV1045 under DC forward bias is extracted. Schottky diode currents obtained from the proposed method shows the average relative error of 6.1% and 9% compared with the measured data for the BAT45 and FSV1045 sample at various temperatures.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.641-647
• /
• 2008

This paper introduces a new technique that can extract natural frequencies and damping ratios from output-only vibration data. Firstly, the free vibration data is obtained from the cross correlations of the output-only response data using a singular value decomposition process. Secondly, the well-known system identification algorithm is applied to extract the natural frequencies and damping ratios from the extracted free vibration data. Comparing to ERADC technique, the accuracy of the proposed modal parameter identification algorithm has been numerically examined. Furthermore, the practicability of the proposed algorithm has been examined through the output-only acceleration data collected from the Seohae cable-stayed bridge. Using the proposed technique, total 24 modes have been identified for the deck plate motions of the bridge.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.251-259
• /
• 2010

We proposed a tail function parameter extraction procedure for the establishment of a robust ion implantation database. We showed that, for the expression of ion implantation profiles, there are many local minimum values set for the third and fourth moment parameters of $\gamma$ and $\beta$ for the Pearson function that comprises the standard dual Pearson and tail functions. We proposed the use of a joined tail function as a mediate function to extract $\gamma$ and $\beta$, and demonstrated that this enables us to extract the parameters uniquely. Other parameters associated with channeling phenomena can also be simply and uniquely extracted by our procedure.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.31 no.6
• /
• pp.380-384
• /
• 2017

From March 1, 2017 to May 31, 2017, subjects were allowed to apply a wrinkle-improving herbal cosmetic product containing the extract of Douchi for 8 weeks. The effectiveness of herbal cosmetics was evaluated through wrinkle improvement efficacy parameter analysis, subjective wrinkle improvement through questionnaires, and adverse reaction. The herbal cosmetic products containing the extract of Douchi showed a significant decrease in the wrinkle improvement efficacy parameter analysis result. The results of the subjective satisfaction analysis after use were also evaluated positively. We could confirm the possibility of wrinkle improvement effect of Douchi extract, and it will be possible to contribute to the expansion of korean medicine field through more studies in the future.