• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.383-388
• /
• 2006

This Paper presents a novel approach to single channel microphone speech enhancement in noisy environments. Widely used noise reduction techniques based on the spectral subtraction are generally expressed as a spectral gam depending on the signal-to-noise ratio (SNR). The well-known decision-directed(DD) estimator of Ephraim and Malah efficiently reduces musical noise under the background noise conditions, but generates the delay of the a prioiri SNR because the DD weights the speech spectrum component of the Previous frame in the speech signal. Therefore, the noise suppression gain which is affected by the delay of the a priori SNR, which is estimated by the DD matches the previous frame rather than the current one, so after noise suppression. this degrades the noise reduction performance during speech transient periods. We propose a computationally simple but effective speech enhancement technique based on the sigmoid type function for the weight Parameter of the DD. The proposed approach solves the delay problem about the main parameter, the a priori SNR of the DD while maintaining the benefits of the DD. Performances of the proposed enhancement algorithm are evaluated by ITU-T p.862 Perceptual Evaluation of Speech duality (PESQ). the Mean Opinion Score (MOS) and the speech spectrogram under various noise environments and yields better results compared with the fixed weight parameter of the DD.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.153-161
• /
• 2017

Branching processes which is used for epidemic dispersion as stochastic process model have advantages to estimate parameters by real data. We have to estimate both mean and dispersion parameter in order to use the negative binomial distribution as an offspring distribution on branching processes. In existing studies on biology and epidemiology, it is estimated using maximum-likelihood methods. However, for most of epidemic data, it is hard to get the best precision of maximum-likelihood estimator. We suggest a Bayesian inference that have good properties of statistics for small-sample. After estimating dispersion parameter we modelled the posterior distribution for 2015 Korea MERS cases. As the result, we found that the estimated dispersion parameter is relatively stable no matter how we assume prior distribution. We also computed extinction probabilities on branching processes using estimated dispersion parameters.

• The Korean Journal of Applied Statistics
• /
• v.26 no.3
• /
• pp.431-440
• /
• 2013

We consider the problem of estimating the parameters of heavy tailed distributions. In general, maximum likelihood estimation(MLE) is the most preferred method of parameter estimation because it has good properties such as asymptotic consistency, normality and efficiency. However, MLE is not always the best solution because MLE is unstable or does not exist in some cases. This paper proposes another parameter estimation method, non-linear least squares(NLS) and compares its performance to MLE. The NLS estimator is achieved by minimizing sum of squared difference between empirical cumulative distribution function(CDF) and a theoretical distribution function. In this article, we compare the NLS method to MLE using simulated data from heavy tailed distributions. The NLS method is shown to perform better than MLE in Burr distribution when the sample size is small; in addition, it performs well in a Frechet distribution.

• Journal of the Korean Data and Information Science Society
• /
• v.7 no.1
• /
• pp.47-57
• /
• 1996

This paper on planning constant accelerated life test is assumed that parameters for a lognormal life distribution are depended on changes of stresses. The proposed test plans are optimum in that they minimize the asymptotic variance of maximum likelihood estimator of a specified quantile at the design stress. The optimal amount of low stress level ${\xi}_{L}$ and optimal sample proportion ${\pi}$ to be allocated at low stress level are obtained when the ratio of scales at high stress level and design stress level is unknown.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1308-1316
• /
• 2018

Accurate tuning of parameter is very important in vector-controlled induction motor. Among the parameters of induction motor, detuning of rotor resistance used in controller design deteriorates drive performance. This paper presents a novel rotor resistance estimation strategy using slip angular velocity in vector-controlled induction motor drives. The slip angular velocity can be calculated by two methods. Firstly, it can be induced from the rotor voltage equation. Secondly, it can be induced from the difference between synchronous angular velocity and rotor angular velocity. The first method includes the rotor resistance, while the second method dose not include this parameter. From this fact, the rotor resistance can be identified by comparing the slip angular velocities in the two methods. In the tuned states of the rotor resistance, performances of flux estimator and speed drive are discussed. The simulation and experimental results are given to verify the validity of the proposed method in various situations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1423-1428
• /
• 2011

This paper proposes a learning input shaper with nonlinear actuator dynamics to reduce the residual vibration of flexible systems. The controller is composed of an estimator of the time constant of the nonlinear actuator dynamics, a recursive least squares method, and an iterative updating algorithm. The updating mechanism is modified by introducing a vibration measurement function to cope with the dynamics of nonlinear actuators. The controller is numerically evaluated with respect to parameter convergence and control performance by using a benchmark pendulum system. The feasibility and applicability of the controller are demonstrated by comparing its control performance to that of an existing controller algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.18-25
• /
• 2013

In this paper, a nonlinear controller based on adaptive back-stepping method is proposed for high performance operation of Interior Permanent Magnet Synchronous Motor (IPMSM). First, in order to improve the performance of speed tracking, a nonlinear back-stepping controller is designed. In addition, since it is difficult to achieve the high quality control performance without considering parameter variation, a parameter estimator is included to adapt to the variation of load torque in real time. Finally, for the efficiency of power consumption of the motor, controller is designed to operate motor with the minimum current for the required maximum torque. The proposed controller is tested through experiment with a 1-hp Interior Permanent Magnet Synchronous Motor (IPMSM) for the angular velocity reference tracking performance and load torque volatility estimation, and to test the Maximum Torque per Ampere (MTPA) operation. The result verifies the efficacy of the proposed controller.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.7-13
• /
• 2022

This paper presents a yaw moment control based on estimated mass for manual-shift commercial vehicles. In yaw moment controller, parameter uncertantiy of vehicle mass is important because the desired yaw moment depends on vehicle parameter. However, in the case of commercial vehicle, the weight of the loaded vehicle is more than twice as much as compared to the unloaded vehicle. The proposed algorithm estimates the vehicle mass by using the longitudinal dynamic and gear shifting characteristics. The estimated mass is used to adaptively modify the vehicle parameters. In addition, this paper estimates the chamber pressure of a pneumatic brake and generates the target yaw moment through on/off valve control. MATLAB/Simulink and Trucksim were performed under sine with dwell test. The results demonstrate that the proposed algorithm improves the lateral and rollover stability.

• Journal of the Korean Statistical Society
• /
• v.20 no.2
• /
• pp.202-207
• /
• 1991

In Le Cam's earlier work on superefficiency, it is proved that if an estimate is superefficient at a given paramter value $\theta$$\_$0/, then there must exist an infinite sequence {$\theta$$\_$n/}) of values(conversing to $\theta$$\_$0/) at which this estimate is worse than M. L. E. for certain classes of loss functions. For one-dimensional cases, these classes of lass functions include squared error loss. However. for multi-dimensional cases, they do not. This note is to give an example where a superefficiest estimator of a multi-dimensional parameter is not inferior to M. L. E. along any sequence ($\theta$$\_$n/) converging to the point of superefficiency with respect to the squared error loss.

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.297-302
• /
• 2010

It is very important to know mean and confidence interval of water-quality constituents such as BOD for water-quality control and management of rivers and reservoirs effectively. The mean and confidence interval of BOD at Anseong2 and Hwangguji3 sampling stations which are located at the border of local governments in Anseong Stream were estimated and analyzed in this paper using Bootstrap technique which is one of non-parametric statistics. The results of Bootstrap were compared with arithmetic mean, geometric mean, Biweight method mean as a point estimator and distribution mean came from the appropriate probability distribution of Log-normal. In Bootstrap technique 12 data set was randomly selected in each year and 1000 samples was produced to get parameter of population. Visual Basic for Applications (VBA) of Microsoft Excel was utilized in Bootstrap. It was revealed that the Bootstrap technique can be used to explain more rigorously and robustly the achievement or violation of BOD target concentration in Total Maximum Daily Load (TMDL).