• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.727-730
• /
• 1996

This paper presents a new on-line generator simulator which can be utilized for the control parameter setting of the exciter and the power system stabilizer (PSS). The proposed simulator equipped with A/D and D/A channels through which actual exciter and PSS can be connected. System parameters and disturbance sequence are easily programmed using friendly developed interface. The developed simulator is tested and verified by connecting a simple AVR implemented by op-amps.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.268-270
• /
• 1993

The implementation of Nonlinear Feedback Linearization control for Electro-Magnetic Suspension system is presented. The controller using TMS320C31 DSP chip was proposed and the experiments were performed Control law for EMS system using feedback linearization is derived and implemented in the DSP. Some tests were constructed far experimental comparison between feedback linearization and classical state feedback The experimental results demonstrate that the feedback linearization controller shows bettor performance than that of the classical state feedback controller and it is robust with respect to disturbance and parameter variation, though some steady-state errors appear.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.338-340
• /
• 1993

In this paper, the method for designing a robust linear multivariable model following servo system is proposed. This model following servo system for the (n)th order reference input and the (n)th order disturbance is treated, and is designed so that the (n)th order response of the plant should be kept close to the (n)th order response of the given model by LQ(Linear Quadratic) optimal regulator approach. It is proved that the characteristics of the model following servo system is robust in the presence of the disturbances and the parameter perturbations of the plant dynamics.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.173-174
• /
• 2007

In this paper, a new speed sensorless control based on an instantaneous reactive power and a fuzzy PI compensator are proposed for the interior permanent magnet synchronous motor (IPMSM) drives. The conventional fixed gain PI and PID controllers are very sensitive to step change of command speed, parameter variations and load disturbance. Also, to the estimated speeds are compensated by using an instantaneous reactive power in synchronously rotating reference frame. In a fuzzy compensator, the system control parameters are adjusted by a fuzzy rule based system, which is a logical model of the human behavior for process control. The effectiveness of algorithm is confirmed by the experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.610-616
• /
• 2008

This paper presents a new robust sensorless control system for high performance induction motor drives fed by a matrix converter with variable structure. The lumped disturbances such as parameter variation and load disturbance of the system are estimated by a variable structure approach based on model reference adaptive scheme. A Reduced Order Extended Luenberger Observer(ROELO) is also employed to bring better responses at the low speed operation. Experimental results are shown to illustrate the performance of the proposed system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1405-1411
• /
• 2007

In this paper, a new speed sensorless control based on a fuzzy compensator are proposed for the interior permanent magnet synchronous motor (IPMSM) drives. The conventional proportional plus integrate(PI) control are very sensitive to step change of the command speed, parameter variations and load disturbance. To cope with these problems of the PI control, the estimated speeds are compensated by using the fuzzy logic controller (FLC). In the FLC used by the speed compensator of the IPMSM, the system control parameters are adjusted by the fuzzy rule based system, which is a logical model of the human behavior for process control. The effectiveness of algorithm is confirmed by the experiments.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1114-1115
• /
• 2007

In this paper, a new speed sensorless control based on a fuzzy compensator are proposed for the interior permanent magnet synchronous motor (IPMSM) drives. The conventional proportional plus integrate(PI) control are very sensitive to step change of the command speed, parameter variations and load disturbance. To cope with these problems of the PI control, the estimated speeds are compensated by using the fuzzy logic controller (FLC). In the FLC used by the speed compensator of the IPMSM, the system control parameters are adjusted by the fuzzy rule based system, which is a logical model of the human behavior for process control. The effectiveness of algorithm is confirmed by the experiments.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.232-234
• /
• 1998

In this paper, we are considered various possible disturbance conditions in order to design controller, $H_{\infty}$ optimal controller is successfully designed to control in such as situations. To do this, we are determined weighting function and design parameter $\gamma$ to method of trial and error by Glover-Doyle algorithm. To compare with $H_{\infty}$-PSS and conventional-PSS which is applied in nominal system and load variations, the dynamic characteristics of $H_{\infty}$-PSS controller was verified which has a good response.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.56-64
• /
• 2006

This paper proposes a new and simple input prediction method for robust servo system. A robust tracking control system for optical disk drives to reject disk runout was recently proposed based on both Coprime Factorization(CF) and Zero Phase Error Tracking(ZPET) control. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness to parameter uncertainties and disturbance rejection capability. Since optical disk tracking servo systems can detect only racking error, it was proposed that the reference input signal for ZPET could be estimated from tracking errors. In this paper, we propose a new control structure for the ZPET controller. It requires less memory than the previously proposed method for the reference signal generation. Therefore, it is very effective in runout control. Furthermore, this method can be applied to defective optical disk like surface defects on disk. Numerical simulation and experimental result show the proposed method effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.37.4-37
• /
• 2001

This paper presents a vibration-rejection control design for a magnetic suspension system which has strong non-linearity, open-loop unstable characteristics, high-order flexible modes, and parameter variations. The target plant to be controlled consists of a U-core electromagnet and a flexible rail. We describe the test rig and formulate the mathematical model and then we set up a control problem as the mixed sensitivity problem where the augmented plant is constructed with frequency weighting functions and the feedback controller is designed by using the H$\infty$ controller. The effectiveness of the designed controller for the magnetic suspension system with high-order flexible modes is validated and justified using several simulations. These results show that the magnetic suspension system is robustly stable against disturbance and gives the well-damped tracking performance ...