• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.52-59
• /
• 2018

철근콘크리트 구조물의 대표적인 열화현상인 염해를 억제하고자 여러 가지 연구가 진행되었는데, 그 중에서 혼화재료를 콘크리트에 혼입하여 사용하는 방법이 대표적으로 알려져 있다. 본 연구에서는 대표적인 콘크리트 혼화재료인 플라이애시를 혼입한 콘크리트와 OPC 콘크리트에 대하여 3가지 수준의 물-결합재비(37%, 42%, 47%)를 고려해 내구성능 평가를 실시하였다. 각 목표 재령일에서 Tang's method에 준하여 촉진 염화물 확산계수 측정 실험을, ASTM C 1202에 준하여 통과전하량 측정 실험을, KS F 2405에 준하여 압축강도 실험을 실시하였다. 또한, 기존의 연구결과인 재령 28일의 실험결과를 참고하여 확산계수에 대한 시간의존성지수(m)를 도출하여 고찰하였으며, 장기재령의 압축강도와 시간의존성지수 간의 상관관계를 평가하였다. 재령 49일부터 플라이애시 혼입 콘크리트에서 OPC 콘크리트 대비 개선된 염해저항성능을 나타내었으며 이는 포졸란 반응에 의해 생성된 불용성의 수화물이 원인으로 사료된다. 플라이애시 혼입 콘크리트에서 OPC 콘크리트 대비 약 1.5배 높은 시간의존성지수를 나타내었으며, 압축강도와의 상관관계 평가 결과, OPC 콘크리트는 압축강도가 증가할수록 선형적으로 시간의존성지수가 증가하는 경향을, 플라이애시 콘크리트는 압축강도가 증가할수록 선형적으로 시간의존성지수가 약간 감소하는 경향을 나타냈다.

• 대한한방부인과학회지
• /
• 제33권1호
• /
• pp.76-85
• /
• 2020

Objectives: The purpose of this review is to overview the studies of acupuncture treatment for pelvic inflammatory disease. Methods: In order to investigate the effect of acupuncture treatment for pelvic inflammatory disease, we searched relevant studies in Pubmed, Cochrane, Oasis, Korean studies Information Service System up to March 2019. After searching studies, we analyzed selected studies. Results: Five studies were included in this review. There were 1 randomized controlled studies and 4 before and after studies. The outcome measurement of pelvic inflammatory disease was divided into effective rate, physical examination, response, hematological parameter, pain. The acupuncture treatment was effective in improving pelvic inflammatory disease. Conclusions: This study shows that acupuncture treatment is one of effective treatment methods for pelvic inflammatory disease. Further large randomized placebo controlled trials will be needed.

• 한국농공학회지
• /
• 제21권4호
• /
• pp.108-117
• /
• 1979

In order to obtain the basic data for design of water structures which can be contributed to the planning of water use. Best fitted distribution function and the equations for the probable minimum flow were derived to the annual minimum flow of five subwatersheds along Geum River basin. The result were analyzed and summarized as follows. 1. Type III extremal distribution was considered as a best fit one among some other distributions such as exponential and two parameter lognormal distribution by $x^2$-goodness of fit test. 2. The minimum flow are analyzed by Type III extremal distribution which contains a shape parameter $\lambda$, a location parameter ${\beta}$ and a minimum drought $\gamma$. If a minimum drought $\gamma=0$, equations for the probable minimum flow, $D_T$, were derived as $D_T={\beta}e^{\lambda}1^{y'}$, with two parameters and as $D_T=\gamma+(\^{\beta}-\gamma)e^{{\lambda}y'}$ with three parameters in case of a minimum drought ${\gamma}>0$ respectively. 3. Probable minimum flow following the return periods for each stations were also obtained by above mentioned equations. Frequency curves for each station are drawn in the text. 4. Mathematical equation with three parameters is more suitable one than that of two parameters if much difference exist between the maximum and the minimum value among observed data.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.50-58
• /
• 2017

This paper proposes a real-time robotic vision control scheme using the weighting matrix to efficiently process the vision data obtained during robotic movement to a target. This scheme is based on the vision system model that can actively control the camera parameter and robotic position change over previous studies. The vision control algorithm involves parameter estimation, joint angle estimation, and weighting matrix models. To demonstrate the effectiveness of the proposed control scheme, this study is divided into two parts: not applying the weighting matrix and applying the weighting matrix to the vision data obtained while the camera is moving towards the target. Finally, the position accuracy of the two cases is compared by performing the slender bar placement task experimentally.

• 대한화학회지
• /
• 제9권1호
• /
• pp.23-28
• /
• 1965

90% ethanol solution에서 benzyl chloride와 radioactive chloride($^{36}Cl^-$)와의 exchange를 反應速度論的으로 硏究하였으며 그 結果로 交換反應은 typical bimolecular reaction임을 알았고 그 activation parameter들은 각기 다음과 같았다. ${\Delta}H^{\neq}$= 18.50 Kcal ${\Delta}S^{\neq}$= -22.09 e.u. 특히 本實驗 缺課와 다른 實驗結果를 綜合討論함으로써 反應速度는 attacking anion의 nuclephilic ability에 크게 관계 됨을 입증할 수 있었으며 또한 exchange reaction에 있어서 halide들의 reactivity의 순서는 bond dissociation energy의 差로써 보다는 오히려 Swain의 nucleophilic parameter(n)로써 설명함이 더욱 타당함을 알았다.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.21-26
• /
• 2004

본 논문에서는 package된 BJT의 RF 등가회로 모델을 optimization과정 없이 직접 추출하는 방법을 개발하였다. 먼저, open 과 short package 구조를 사용하여 plastic package의 기생성분을 측정된 S-파라미터로부터 정확히 제거하였다. 이와 같이 package do-embedding된 S-파라미터로부터 package lead와 chip pad 사이의 bonding wire 인덕턴스와 chip pad 캐패시턴스를 직접 추출하는 간단한 방법을 구축하였다. 그 후에 내부 BJT소자의 소신호 모델변수들은 RF 등가회로로부터 유도된 Z나 Y-파라미터 방정식을 이용하여 결정하였다. 이 방법으로 모델화된 packaged BJT의 S-파라미터는 측정 데이터와 아주 잘 일치하였으며 이는 새로운 추출방법의 정확성을 증명한다.

• 제어로봇시스템학회논문지
• /
• 제22권7호
• /
• pp.543-551
• /
• 2016

This paper presents the analysis and implementation of traveling surface characteristics test equipment using optical mice in connection with the velocity estimation of a mobile robot equipped with optical mice. In the traveling surface characteristics test equipment, a traveling surface sample is made to rotate toward stationary optical mice instead of a mobile robot equipped with optical mice moving over a traveling surface. First, the conceptual design and operational principle of the traveling surface characteristics test equipment is explained. Second, the velocity kinematics of the traveling surface characteristics test equipment is formulated; based on this, the parameter setting of the traveling surface characteristics test equipment is described. Third, the implementation of the traveling surface characteristics test equipment is described in detail, including the mechanical design and construction and the hardware and software development. Fourth, using the prototype of the traveling surface characteristics test equipment, the experimental results of the statistical parameter extraction for different traveling surface samples are given. Finally, some potential usages of the traveling surface characteristics test equipment are discussed.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.111-132
• /
• 1996

Taguchi's parameter design is to determine optimal settings of design parameters of a product or a process such that the characteristics of a product exhibit small variabilities around their target values. His analysis of the problem has focused only on a single characteristic or response, but the quality of most products is seldom defined by a characteristic, and is rather the composite of a great number of characteristics which are often interrelated and nearly always measured in a variety of units. The critical problem in dealing with multiple characteristics is how to compromise the conflicts among the selected levels of the design parameters for each individual characteristic. In this paper, the EXTOPSIS Model using SN ratio which can be optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal compromise among several different response variables is developed. Two existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, and the desirability function.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.13-22
• /
• 2000

In order to resolve the problem of increasing traffic entailed by the economic development, road system is reorganization and new highways are built, and long span bridges over 40m are being constructed in environmental and aesthetic considerations. Most long span bridges that are currently being constructed are in general steel box girder and preflex girder bridges; however these types of breiges are less efficiency than PSC I-type girder bridges in terms of construction cost and maintenance. Therefore, in these study, structural efficiency of PSC I-type girders based on section parameters, concrete compressive strength and other design parameter is observed to develope new PSC I-type girder for long span bridges. As a results of analysis, most important design parameters that control the stress of the girder are found to be the top flange width and the height of girder. In this light, the relationship between the two variables is determined and cross-section details of the girder that most appropriates for the long span bridges are proposed. The use of high strength concrete appears to increase the general design span however the increase rate of the span from increasing concrete ultimate strength appears to be reduced depending on the span. Also, the optimal girder spacing is determined through the parameter studies of design span using the proposed girder.

• 한국통신학회논문지
• /
• 제34권8C호
• /
• pp.814-821
• /
• 2009

초광대역 방식의 실내 무선 위치인식 추정에서 비 가시거리 환경으로 인한 불규칙한 신호 도착시간 또는 클러스터화 된 다중경로 성분들의 겹침으로 인해, 도착시간 매개변수 추정 기법들은 합리적인 도착시간 (TOA) 매개변수를 얻는데 어려움을 가진다. 이 문제를 극복하고 우수한 성능의 초광대역 실내 우선 위치인식 추정을 달성하기 위해 종래 추정 기법과 다르고 클리스터 문제에 영향을 거이 받지 않는 강인한 TOA 매개변수 추정 기법과 초광대역 신호 모형을 제안한다. 컴퓨터 모의실험을 통해 제안 모형과 추정기법의 타당성을 검증하고 추정오차의 성능도 분석한다.