• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.31-38
• /
• 2014

Maximum power point tracking method is very important to enhance efficiency of photovoltaic system. Meanwhile a lot of research about MPPT has been studied and developed new one better than a method of the past. This paper deals with Perturb and Observation that are most commonly used. Tracking parameter changed PV voltage for PV current and it was simulated with P-SIM program. The P&O tracking method to use current for parameter lows ripple rate of output and enhances response rate of tracking. Through this study, it has been demonstrated that method using current for tracking parameter is effective.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.827-837
• /
• 2005

In this study, we derived a new non-dimensional variable including bubble size and air diffusing area by Buckingham's theorem for making a practical correlation with experimental results. Firstly, we drew a relationship between a non-dimensional variable, $NH/u_s$, which has a form of Froude number and destratification efficiency with a simple theoretical consideration. Then we derived two non-dimensional variables by Buckingham's ${\pi}$-theorem and equating them with a form of $Fr_N$ for making single parameter to correlate overall destratification efficiency. As the result, the single parameter Be number shows a correlations with destratification efficiencies obtained from laboratory and pilot experiments. Also, for the practical applications, we conducted multiple regression analysis using Be and tank area to make predictive equations about destratification efficiency. The result also shows a successful correlations with destratification efficiency ($R^2$>0.9, p<0.001). Using this equation, we proposed a new design methodology with respect to bubble diffusing area.

• The Pure and Applied Mathematics
• /
• v.15 no.1
• /
• pp.19-34
• /
• 2008

A new algorithm for the solution of an inverse problem of determining unknown source parameter in a parabolic equation in reproducing kernel space is considered. Numerical experiments are presented to demonstrate the accuracy and the efficiency of the proposed algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.959-965
• /
• 2008

We shall propose several estimators for the scale parameter in a uniform distribution with the presence of a half-triangle outlier, and obtain mean squared errors(MSE's) for their proposed estimators. And we shall compare numerically efficiencies for proposed several estimators of the scale parameter in a uniform distribution with the presence of a half-triangle outlier in the small sample sizes.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.581-587
• /
• 2010

We shall propose several estimators for the scale parameter in a uniform distri-bution with a generalized uniform outlier when the scale parameter is a function of a known exposure level, and obtain expectations and variances for their proposed estima-tors. And we shall compare numerically efficiencies for proposed estimators of changed parameters of the scale in the small sample sizes.

• Steel and Composite Structures
• /
• v.20 no.5
• /
• pp.1119-1131
• /
• 2016

As a first attempt, an inverse hybrid numerical method for small scale parameter estimation of functionally graded (FG) nanobeams using measured frequencies is presented. The governing equations are obtained with the Eringen's nonlocal elasticity assumptions and the first-order shear deformation theory (FSDT). The equations are discretized by using the differential quadrature method (DQM). The discretized equations are transferred from temporal domain to frequency domain and frequencies of the nanobeam are obtained. By applying random error to these frequencies, measured frequencies are generated. The measured frequencies are considered as input data and inversely, the small scale parameter of the beam is obtained by minimizing a defined functional. The functional is defined as root mean square error between the measured frequencies and calculated frequencies by the DQM. Then, the conjugate gradient (CG) optimization method is employed to minimize the functional and the small scale parameter is obtained. Efficiency, convergence and accuracy of the presented hybrid method for small scale parameter estimation of the beams for different applied random error, boundary conditions, length-to-thickness ratio and volume fraction coefficients are demonstrated.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.303-308
• /
• 2018

This paper proposes a simple yet accurate method for estimating the antenna correlation coefficient (ACC) of a high-order multiple-input multiple-output (MIMO) antenna. The conventional method employed to obtain the ACC from three-dimensional radiation patterns is costly and difficult to measure. An alternate method is to use the S-parameters, which can be easily measured using a network analyzer. However, this method assumes that the antennas are highly efficient, and it is therefore not suitable for lossy MIMO antenna arrays. To overcome this limitation, we define and utilize the non-coupled radiation efficiency in the S-parameter-based ACC formula. The accuracy of the proposed method is verified by the simulation results of a 4-port highly coupled lossy MIMO array. Further, the proposed method can be applied to N-port arrays by expanding the calculation matrix.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.809-812
• /
• 2008

Structural parameter variation effects (changing the coplanar gap under different discharge dimensions) and use of complex gas mixtures (He, Ne, Ar and Xe) in mercury-free fluorescent lamps are studied in this paper. Pure Neon gas is the best buffer gas for obtaining high luminous efficiency in mercury-free fluorescent lamps. It is shown that with a shorter coplanar gap (30mm), a high luminous efficiency can be obtained at low operating voltage, as well as high luminance uniformity and stable discharge with a Ne-Xe 20% gas mixture.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.270-277
• /
• 2013

Single phase induction motor(SPIM) is used widely because it is driven by single phase source. However, the efficiency of the motor is not good due to saturation of magnetic material. To analyze the motor accurately, the magnetic saturation characteristics should be considered in analysis of equivalent circuit. In this paper, lumped parameter of circuit are derived from multi phase induction motor using method of symmetrical coordinates. Also, we presents a method for the equivalent circuit analysis of SPIM using magnetic saturation rate. The magnetic nonlinearity is considered deriving magnetizing reactance from voltage-current saturation curve. As a results, current characteristic, torque, output and efficiency are shown through analysis of equivalent circuit. A simulation results of SPIM will be used to improve the characteristics and efficiency of motor.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.836-846
• /
• 2014

To expedite UHD (Ultra High Definition) video service, the HEVC (High-Efficiency Video Coding) technology has recently been standardized and it achieves two times higher compression efficiency than the conventional H.264/AVC. To obtain the improved efficiency, however, it employs many complex methods which need complicated calculation, thereby resulting in a significantly increased computational complexity when compared to that of H.264/AVC. For example, to improve the coding efficiency of intra frame coding, up to 35 intra prediction modes are defined in HEVC, but this results in an increased encoding time than the H.264/AVC. In this paper, we propose a fast intra prediction mode decision scheme which reduces computational complexity by changing the number of intra prediction mode in accordance with the percentage of PU sizes for a given video resolution, and by classifying the 35 intra prediction modes into 4 categories considering video resolution and quantization parameter. The experimental results show that the total encoding time is reduced by about 7% on average at the cost of only 2% increase in BD-rate.