• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2327-2329
• /
• 1998

In this paper, an algorithm to make a configuration system for managing the I/O device of programmable logic controller(PLC) is proposed. Parallel processing architecture is used to deal with a number of I/O devices. From that architecture, a contention problem between processors can arise. To resolve this problem, the configuration system that contains informations about I/O devices is introduced. This configuration system is used to check the contention between processors in the I/O device and also used in program execution.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.9-14
• /
• 2008

The effects of baffles in PEM fuel cell with parallel flow channel has been simulated by using conmmercial program. The simulation has been conducted through the channel and there are four different heights of baffles, No Baffle($H_b$=0), Partially Blocked Baffle(0.25, 0.5, 0.75), Fully Blocked Baffle(1) conditions. The result shows that current density changes while placing a baffle at the various positions along the channel. Current density with a single baffle is higher than that without baffle and current density using Fully Blocked Baffle(FBB) is much higher than current density using Partially Blocked Baffle(PBB). When the baffle is closer to outlet of the channel, current density increases. It is found that pressure is related to current density. If the pressure is higher, the better performance will be expected.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.395-398
• /
• 2006

In this paper, for implementing a real-time software GNSS receiver we propose the highly efficient and fast algorithms such as partial down-conversion, phase rotator, composite I&Q accumulation, Virtual DCO technique, and parallel acquisition using FFT. When the proposed algorithms are used, more 30 tracking channels with 3 tracking arm(early-prompt-late) is operated real-time on Intel 2.8GHz personal computer. Also, the partial down-conversion reduces the FFT size, for parallel acquisition, to 1/8 of conventional FFT-size and the program size includes map is not exceed 1Mbyte. Finally, the proposed real-time software GNSS receiver using the proposed algorithms provides the navigation solution with below 10 meter rms error.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.455-460
• /
• 2001

For some applications, the computational structure changes dynamically during the program execution. When this happens, static partitioning and allocation of tasks are not enough to achieve high performance in parallel computers. In this paper, we propose a dynamic load balancing algorithm efficiently distributes the computation with dynamically growing tree structure to processors. We present an implementation technique for the algorithm on mesh architectures, and analyze its complexity. We also demonstrate through experiments how our algorithm provides good quality solutions.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.777-780
• /
• 1993

An insulated gate bipolar transistor(IGBT) is a MOS gate turn on/off bipolar transistor which combines the attributes of the MOSFET and bipolar transistor. Because of its limitation of power capability compared to thyristor or GTO, some parallel connection of IGBT has been studied to improve the limitation of current capabillity. In this paper, the switching effects from the unbalance of internal parameters of IGBT and the turn-off snubber characteristics are investigated using SPICE program.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.255-256
• /
• 1998

In this paper, we propose the multi-axial classification system using parallel coding method that is systemic and flexible properties for representing dental clinical behavior. The methodology and organization of this thesis as follows. First, an analysis of other classification systems. Second, the domain of medical behavior and axises using selected elements was were determined. Third, the new code system is constructed of these common factors in properties of prediction of hierarchy, brevity, simplicity, flexibility and mnemonic usage. Finally, the framework of classification system for dental was made using multi-axial code system. The result of the this study, the eight bases axis of multi-axial code system is composed and can be basic information of research for construction of classification system of all medical domain.

• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2020

In this study, parallel work-learning training, which was started in 2013 as a pre-employment promotion policy, is an important factor that determines the success or failure of training. As a time when various institutional supplementation is needed to encourage company participation, this study is to identify the factors of participation of companies participating in work-learning parallel. To this end, a questionnaire survey was conducted of companies participating in parallel work-learning in Chungnam, and the results were analyzed using the structural equation model. As a result of the study, the reason for the company's participation in parallel work-learning was firstly, 84% of government subsidy received education and training expenses. Second, 66% of workers were able to pay less than regular workers, and thirdly, it was easy to hire new employees in the field. 26%, 17% of them were invited by acquaintances for no particular reason. Therefore, the study suggests that participation in the work-learning parallel training contributes to the management costs, management of employee turnover, and human resource development. In future research, it is necessary to subdivide tests and estimates by conducting studies on regions, occupations, gender, wages, and years of service in Korea.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1809-1815
• /
• 2008

This experiment simulated the fire driven flow of an underground station through parallel processing method. Fire analysis program FDS(Fire Dynamics Simulation), using LES(Large Eddy Simulation), has been used and a 6-node parallel cluster, each node with 3.0Ghz_2set installed, has been used for parallel computation. Simulation model was based on the Kwangju-geumnan subway station. Underground station, and the total time for simulation was set at 600s. First, the whole underground passage was divided to 1-Mesh and 8-Mesh in order to compare the parallel computation of a single CPU and Multi-CPU. With matrix numbers($15{\times}10^6$) more than what a single CPU can handle, fire driven flow from the center of the platform and the subway itself was analyzed. As a result, there seemed to be almost no difference between the single CPU's result and the Multi-CPU's ones. $3{\times}10^6$ grid point one employed to test the computing time with 2CPU and 7CPU computation were computable two times and fire times faster than 1CPU respectively. In this study it was confirmed that CPU could be overcome by using parallel computation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.101-108
• /
• 2000

The data prefetching scheme is an effective technique to reduce the main memory access latency by exploiting the overlap of processor computations with data accesses. However, if the prefetched data replicate the useful existing data in the cache memory and they are not being used in computations. performances of programs are aggravated. This phenomenon results from the lack of correct predictions for data being used in the future. When parallel programs exploit the data arrays for computations, the grain size is useful information for data prefetching scheme because it implies the range of data using in computations. Based on this information, we suggest a new data prefetching scheme exploited by the grain size of the parallel program. Simulation results show that the suggested prefetching scheme improves the performance of the simulated parallel programs due to the reduction of bus transactions as well as useful prefetching operations.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.4
• /
• pp.128-133
• /
• 2010

PURPOSE. The purpose of this study was to compare the accuracy of the implant master cast according to the type (pick-up, transfer) and the length (long, short) of the impression copings. MATERIALS AND METHODS. The metal master cast was fabricated with three internal connection type implant analogs (Osstem GS III analog), embedded parallel and with $10^{\circ}$ of mesial angulation to the center analog. Four types of impression coping were prepared with different combinations of types (transfer, pick-up) and lengths (long, short) of the coping. The impressions were made using vinyl polysiloxane (one step, heavy + light body) with an individual tray, and 10 impressions were made for each group. Eventually, 40 experimental casts were produced. Then, the difference in the distance between the master cast and the experimental cast were measured, and the error rate was determined. The analysis of variance was performed using the SPSS (v 12.0) program (${\alpha}$= .05), and the statistical significance was set at P < .05. RESULTS. The ANOVA showed that the pick-up type impression coping exhibited a significantly lower error rate than the transfer type. However, no significant difference was observed with respect to the length of the impression coping. Additionally, no significant difference was observed between the parallel and mesial angulated groups. CONCLUSION. Within the limitations of this study, the pick-up type impression coping exhibited a more accurate implant master cast than the transfer type in parallel group. The accuracy of the implant master cast did not differ for different lengths of impression coping of at least 11 mm. Additionally, the accuracy of the implant cast was not different for the parallel and $10^{\circ}$ mesial angulated groups.