• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.1-7
• /
• 2000

Generally, one-dimensional fiber optic code-division multiple-access(CDMA) system is encoded and decoded using optical orthogonal codes(OOC’s), where two-dimensional fiber optic CDMA system uses optical orthogonal signature pattern codes(OOSPC’s) for parallel data link process. The OOSPC’s should have good autocorrelation and cross-correlation properties. However, if timing information or synchronization of OOSPC’s can be obtained by other means, the property of autocorrelation may not be restricted and we can increase the number of pattern codes. In this paper we introduce the fiber optic CDMA system for parallel transmission of two-dimensional data and investigate methods of generation of two-dimensional pattern codes. The probability density function of interference noise is calculated in interfering OOSPC’s of the users and the corresponding bit error rate is derived.. We compare each OOSPC’s by plotting bit error rate versus threshold values and the number of simultaneous users, from the result, we propose the optimal OOSPC’s conditions for the parallel transmission of two-dimensional data.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.1
• /
• pp.53-69
• /
• 2024

Background: This study aims to examine the multiple-parallel mediation effects of depression, anxiety, and anger in the relationship between anger-out and interpersonal problems in men. In addition, the purpose of this study was provide a basis for supporting psychological services alongside therapeutic services as a way to increase the overall interpersonal relationship of men. Design: Survey. Methods: This study targeted 208 adult men aged 20 to 59 years. Participants were recruited through online cafe postings, and data were collected by running an online survey link. Based on the collected data, correlations between variables were investigated, and multiple parallel mediation analysis was performed using the model (Model 4) presented by SPSS PROCESS Macro. In addition, the significance of statistics was confirmed by applying the bootstrapping method, and the significance of the indirect effect was confirmed by the Sobel Z test. Results: First, Anger-out in men is related to interpersonal problems(β=.614, P<.001). Second, it can see that anger-out not only increases depression·anxiety, but also increases anger. Third, Anger-out has been shown to increase depression, anxiety, and anger, leading to increasing interpersonal problems. Anger-out had a significant effect on depression, anxiety(β=.324 P<.001), and anger(β=.551, P<.001), and depression, anxiety(β=.239, P<.001), and anger (β=.318, P<.01) had a significant effect on interpersonal relationship problems. Lastly, it can be seen that men's anger-out is experienced more as anger than depression or anxiety. Conclusion: When providing medical services to men, I believe that if externally expressed anger is addressed along with therapeutic treatment, invisible depression can also be intervened and a more positive prognosis can be expected

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.47-56
• /
• 2012

This research is to develop satiable battery charger with a variety of capacity and voltage specifications of battery. For this, voltage or current were controlled through buck converter which is DC voltage that already received three-phase at primary side and passed bridge rectifier diode. And, it was comprised of full-bridge converter and HFTR for insulation and a square wave AC. The transformer primary side was comprised in series to divide certain charging current and the secondly side was comprised of 6 fixed transformers so that they can generate certain amount of power and various output voltage through relay parallel compound 6 DC Link outputs. To confirm such structure's verification and validity, simulation with PSIM was conducted, and validity of proposed variable charger system was verified through 3kW stack production.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.877-883
• /
• 2013

This paper discussed a transformer-less shunt static synchronous compensator (STATCOM) with consideration of the following aspects: fast compensation of the reactive power, harmonic cancelation and reducing the unbalancing of the 3-phase source side currents. The STATCOM control algorithm is based on the theory of instantaneous reactive power (P-Q theory). A self charging technique is proposed to regulate the dc capacitor voltage at a desired level with the use of a PI controller. In order to regulate the DC link voltage, an off-line Genetic Algorithm (GA) is used to tune the coefficients of the PI controller. This algorithm arranged these coefficients while considering the importance of three factors in the DC link voltage response: overshoot, settling time and rising time. For this investigation, the entire system including the STATCOM, network, harmonics and unbalancing load are simulated in MATLAB/SIMULINK. After that, a 35KVA STATCOM laboratory setup test including two parallel converter modules is designed and the control algorithm is executed on a TMS320F2812 controller platform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1494-1500
• /
• 1999

In order to provide high speed multimedia data rate service, Multi-Code CDMA has been proposed which converts high speed serial data stream into N parallel low speed data streams with orthogonal PN codes for spreading. However this signal has multi level and causes interferences to be increased at the neighboring cell boundary in the reverse link. Therefore in order to solve the above mentioned problem, M/B-MC/CDMA, in which multi level signal is converted to binary level signal using M/B conversion, is proposed and the performance is compared with MC-CDMA.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.589-598
• /
• 2006

In this paper, we describe the development and optimization of an embedded Biuetooth solution on an SoC platform for real-time audio streaming over a Bluetooth wireless link. The solution includes embedded Bluetooth protocol stack and profile simplemented on a virtual operating system for portability, and other optimization techniques to fully exploit the benefits of multimedia-oriented SoC. The optimization techniques implemented in this paper are memory access minimization by using on-chip scratch pad memory, codec library optimization with DSP and parallel memory access instruction set, and dynamic audio quality adjustment regarding current wireless link status. Experimental results show that the optimized solution presented in this paper can support high-qualify audio streaming without the support of external memory.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.705-708
• /
• 2005

In this paper, we propose a method that search the sweet spot of antenna beam, and keep it for fast speed transmission in millimeter wave on point-to-point link We use TDD(Time Division Duplex) as transfer method, and it transfers the control data of antenna. The proposed method is composed of two ADALINE which used the parallel. The efficiency of the proposed method is verified by means of simulations with white Gaussian noise and not on point-to-point link.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.55-59
• /
• 2018

Currently, the development of industry makes needs larger electric supply. Providers must consider the efficiency about losses and reliability of the system. In this case, DC power system can save electrical energy; long-distance transmission line losses. Relevance to switch technology with a voltage-source converter (VSC) in AC-DC conversion system have been researched. But, protection device of DC-link against fault current is still needed to study much. VSC DC power system is vulnerable to DC-cable short-circuit and ground faults, because DC-link has a huge size of capacitor filter which releases extremely large current during DC faults. Furthermore, DC has a fatal flaw that current zero crossing is nonexistence. To interrupt the DC, several methods which make a zero crossing is used; parallel connecting self-excited series LC circuit with main switch, LC circuit with power electronic device called hybrid DC circuit breaker. Meanwhile, self-excited oscillator needs a huge size capacitor that produces big oscillation current which makes zero crossing. This capacitor has a quite effective on the price of DCCB. In this paper, hybrid self-excited type superconducting DCCB which are using AC circuit breaker system is studied by simulation tool PSCAD/EMTDC.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1053-1063
• /
• 2002

This paper presents a robust nonlinear controller for a f degree of freedom (DOF) parallel manipulator in the task space coordinates. The proposed control strategy requires information on orientations and translations in the task space unlike the joint space or link space control scheme. Although a 6 DOF sensor may provide such information in a straightforward manner, its cost calls for a more economical alternative. A novel indirect method based on the readily available length information engages as a potential candidate to replace a 6 DOF sensor. The indirect approach generates the necessary information by solving the forward kinematics and subsequently applying alpha-beta-gamma tracker With the 6 DOF signals available, a robust nonlinear task space control (RNTC) scheme is proposed based on the Lyapunov redesign method, whose stability is rigorously proved. The performance of the proposed RNTC with the new estimation scheme is evaluated via experiments. First, the results of the estimator are compared with the rate-gyro signals, which indicates excellent agreement. Then, the RNTC with on-line estimated 6 DOF data is shown to achieve excellent control performance to sinusoidal inputs, which is superior to those of a commonly used proportional-plus-integral-plus-derivative controller with a feedforward friction compensation under joint space coordinates and the nonlinear controller under task space coordinates.