• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.737-741
• /
• 2003

The wind power system is spotlighted as one of the no-pollution power generation systems. The system uses winds as power source that are rotated the blade and the rotating power from blade generate the electricity power. Gearbox needs to transfer the wind powers that have the high-torque-low-speed characteristics to generator that have the low-torque-high-speed characteristics. Because the wind power system generally locates the remote place like seaside or mountainside and the gearbox installs on the limited and high placed space, the gearbox of the wind power system is required the optimal space design and high reliability. In this paper, the structure of the gearbox is proposed to achieve the optimal space and efficiency by compounding the planetary gear train that has the high power density and parallel type gear train that has the long service life. The design parameters that are affected the service life are studied. The gear ratio and face width are investigated as an affected parameter for design sensitivity of service life.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.118-123
• /
• 2004

We investigated quench distribution in AU/YBCO thin film meander lines with a heater. Quench distribution during faults is important for superconducting fault current limter applications, because uniform quench allows application of higher voltages across the meander lines. AU/YBCO thin films grown on sapphire substrates were patterned into meander lines by photolithography. Gold films grown on the rear sides of the substrates were also patterned into meander lines, and used as heaters. Meander lines on the front and the rear sides were connected in parallel. The meander lines were subjected to simulated AC fault currents for quench measurements during faults. They were immersed in liquid nitrogen during the experiment for effective cooling. Resistance of the AU/YBCO meander lines initially increased more rapidly with the rear heater than without, and consequently the fault current was limited more. The resistance subsequently became similar, The resistance distribution was more uniform with the heater, especially during the initial quench. Quench was completed more uniformly and significantly earlier. This resulted in uniform distribution of dissipated power. These results could be explained with the concept of quench propagation, which was accelerated by heat transfer across the substrate from the rear heater.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권3호
• /
• pp.145-152
• /
• 2003

Electrical gate and drain characteristics of double heterostructure InAlAs/InGaAs pseudomorphic HEMTs have been investigated under sub-bandgap photonic excitation ($hv). Drain $(V_{DS})-,{\;}gate($V_{DS})-$, and optical power($P_{opt}$)-dependent variation of the abnormal gate leakage current and associated physical mechanisms in the PHEMTs have been characterized. Peak gate voltage ($V_{GS,P}$) and the onset voltage for the impact ionization ($V_{GS.II}$) have been extracted and empirical model for their dependence on the $V_{DS}$ and $P_{opt} have been proposed. Anomalous gate and drain current, both under dark and under sub-bandgap photonic excitation, have been modeled as a parallel connection of high performance PHEMT with a poor satellite FET as a parasitic channel. Sub-bandgap photonic characterization, as a function of the optical power with $h\nu=0.799eV$, has been comparatively combined with those under dark condition for characterizing the bell-shaped negative humps in the gate current and subthreshold drain leakage under a large drain bias.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.95-101
• /
• 2014

In this paper, UPS, with a built-in instantaneous sag drop compensation features, was developed to improve performance. The improved UPS, using instantaneous moving average method, compensates by quickly measuring the voltage and series inverter of half-bridge type, using line-interactive method that links with the voltage of the battery and power source, was developed. In addition, by developing a parallel inverter that uses a high-efficiency PWM switching method, overall UPS system was enhanced. To verify the performance of the proposed algorithm, single-phase 5[kVA] UPS systems were designed and the experimental system was constructed. The low-cost type of Cortex-M3 module CPU STM32F103R8T6 (32[bit]) is attached and the switching time of mode transfer was set within 4 [ms]. THD of the linear load operates in less than 3[%], and the stability of the output voltage operates in approximately ${\pm}2[%]$ range. The superior performance of the operations was confirmed with the system set as above.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.363-370
• /
• 2008

In this paper, three kinds of PWM strategies for a three-phase current-fed dc/dc converter are proposed and compared in terms of losses and voltage transfer ratio. Each PWM strategy is described graphically and their switching losses are analyzed. With the proposed PWM C strategy, one turn-off switching of each bridge switch is eliminated to reduce switching losses under the same switching frequency. In addition, RMS current through the bridge switches is lowered by using parallel connection between two bridge switches and thus, conduction losses of the switches are reduced. Further, copper losses of the transformer are decreased due to the reduced RMS current of each transformer's winding. Therefore, total losses are minimized and the efficiency of the converter is improved by using the proposed PWM C strategy. Digital signal processor (DSP: TI320LF2407) and a field-programmable gate array (FPGA: EPM7128) board are used to generate PWM patterns for three-phase bridge and clamp MOSFETs. A 500W prototype converter is built and its experimental results verify the validity of the proposed PWM strategies.

• 정보과학회 논문지
• /
• 제42권11호
• /
• pp.1332-1338
• /
• 2015

최근 고품질, 초고해상도 실시간 렌더링 지원을 위하여 다중 GPU 렌더링에 대한 관심이 커지고 있다. 실시간 렌더링에서 여러 개의 GPU로 고성능을 달성하기 위해서는 GPU 간의 데이터 전송 지연과 프레임 합성 부하를 고려해야 한다. 이 논문은 이러한 부하를 최소화하고 다중 GPU의 효율을 향상하기 위해 split frame 렌더링의 동기화를 묵시적 질의 기반으로 향상하는 기법을 제안한다. 또한, 이러한 묵시적 동기화 기반 프레임 합성을 지원하기 위한 메시지 큐 기반의 렌더링 스케줄링 알고리즘도 제안한다. 본 알고리즘을 적용한 실험은 본 알고리즘이 기존 알고리즘 대비 200% 이상 효율을 향상함을 확인하였다.

• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.474-481
• /
• 2011

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the finite element stress analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia crown were prepared. Each model contained cortical bone, trabecular bone, periodontal ligament, 4mm apical root canal filling, and post-and-core. A 50N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$ angle to the long axis of the tooth. And three parallel type post (zirconia, glass fiber and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. For the Result of the research, the model applied glass fiber to post material has lowest von Mises stress and it is suitable for material of post core systems.

• 환경생물
• /
• 제20권1호
• /
• pp.78-84
• /
• 2002

The effects of light and darkness on stomatal aperture and guard cell apoplastic pH in the intact leaf and in the isolated epidermal strips of Commelina communis have been investigated. Stomata in the intact leaf opened wide in the light. In contrast, stomata in the isolated epidermal strips did not respond clearly to light. To eucidate the relationship between the stomatal aperture and the guard cell apoplastic pH, apoplastic pH was measured. In the light the guard cell wall of intact leaf was acidified by pH 1.9 units, falling from pH 7.3 to pH 5.4 in the first 10 minutes. On the contrary, apoplastic pH of isolated epidermal strips changed slowly from pH 7.3 to pH 6.9 at 20 min. Stomata in the intact leaf closed rapidly in the dark. On the other hand, stomata in the isolated epidermal strips failed to close in dark. There was a slow increase in apoplastic pH on transfer to the dark after incubation for 1.5 h in the light and the level observed before the experiment was regained after around 40 min. When the isolated epidermal strips were transferred to the dark, apoplastic pH maintained a uniform level of around pH 7.2-7.4. These results indicate that the mechanism of stomatal opening and closing from isolated epidermal strips and intact leaves could be different.

• 한국통신학회논문지
• /
• 제26권11C호
• /
• pp.85-93
• /
• 2001

본 논문에서는 전광 통신망에서 장애 위치에 독립적인 경로 복구 방법을 제안하고 그 필요 파장 수를 계산한다. 제안된 방법에서는 모든 링크 장애에 대해 하나의 대체 파장만을 이용하기 때문에 고정 파장 송수신기만을 사용한 수가 있어 노드 구축 경비를 줄인 수 있다. 또한 운용 경로와 대체 경로가 공유되지 않는다면 장애의 위치에 관계없이 대체 경로와 대체 파장이 사전에 결정되어 장애의 검출만으로 복구 과정이 바로 시작될 수 있다. 이러한 특징과 제안되는 병렬 크로스커넥션을 수행하도록 하는 메시지 전달 기법을 사용하면 복구 과정을 간단하고 빠르게 만들 수 있다. 그리고 제안된 복구 방법에서 필요한 파장 수를 계산하고 필요한 파장 수가 가변 대체 파장을 사용하는 복구 방법에서 필요한 파장 수와 서로 비슷함을 보임으로써 전송 경비의 증가 또한 거의 없음을 보인다.

• 한국광학회지
• /
• 제9권6호
• /
• pp.385-389
• /
• 1998

본 논문에서는 공간정합필터의 데이터 베이스로써 체적 홀로그램을 이용한 광상관기를 구성하였다. 광상관 시스템은 광학의 고속 및 병렬처리 특징을 지니며, 공간정합필터가 기록된 체적홀로그램은 방대한 저장 능력과 실시간 랜덤 엑세스의 장점을 갖는다. 데이터 베이스로 사용되는 영상들은 각가 공간광변조기에 디스플레이 되어 퓨리에 변환 렌즈를 통과한 후 퓨리에 변환된 공간정합필터의 형태로 광굴절 매질에 기록된다. 대용량의 데이터 베이스를 구성하기 위한 다중화 방법으로 스텝 모터를 이용하여 광굴절 매질을 회전하는 각다중화 기술을 사용하였다. 체적홀로그래픽 광상관 실험을 통하여 지문인식에의 응용 가능성을 제시하였다.