• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.10-17
• /
• 1999

The present work presents condensation heat transfer and pressure drop data for the flow of R-12 in flat extruded aluminum tubes with small hydraulic diameters. The tube outside dimensions are $18mm(width){\times}1.7mm(height)$. Three types of internal geometry with the same outside dimensions are tested : sample 1 (7 tube holes), sample 2 (13 tube holes) and sample 3 (7 tube holes, micro-fin). The overall heat transfer coefficient is obtained for air-to-refrigerant heat transfer, and the Wilson plot method is used to determine the heat transfer coefficient for refrigerant flow. The sample 2 and sample 3 show significantly higher performance than sample 1. The heat transfer rates for the sample 2 and sample 3 are 9% and 12% higher, respectively, than sample 1. The friction factors for the sample 2 and sample 3 are 11.9% and 2.4% higher, respectively, than sample 1.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.354-356
• /
• 2021

For science applications that requires rapid transfer and sharing of large volume data, many efforts to improve data transfer performance have been made based on concurrency, parallelism and pipelining in data transfer applications such as Globus/GridFTP. In this paper, as a similar trial, experiments have been conducted for the expected transfer throughput enhancement by the increased number of network interface and parallelism in the Mptcp emulation environment and the result is presented.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.382-386
• /
• 2004

Recently, with the machine learning trend, most of the machine translation systems on over the world use two syntax tree sets of two relevant languages to learn syntactic tree transfer rules. However, for the English-Vietnamese language pair, this approach is impossible because until now we have not had a Vietnamese syntactic tree set which is correspondent to English one. Building of a very large correspondent Vietnamese syntactic tree set (thousands of trees) requires so much work and take the investment of specialists in linguistics. To take advantage from our available English-Vietnamese Corpus (EVC) which was tagged in word alignment, we choose the SITG (Stochastic Inversion Transduction Grammar) model to construct English- Vietnamese syntactic tree sets automatically. This model is used to parse two languages at the same time and then carry out the syntactic tree transfer. This English-Vietnamese bilingual syntactic tree set is the basic training data to carry out transferring automatically from English syntactic trees to Vietnamese ones by machine learning models. We tested the syntax analysis by comparing over 10,000 sentences in the amount of 500,000 sentences of our English-Vietnamese bilingual corpus and first stage got encouraging result $(analyzed\;about\;80\%)[5].$ We have made use the TBL algorithm (Transformation Based Learning) to carry out automatic transformations from English syntactic trees to Vietnamese ones based on that parallel syntactic tree transfer set[6].

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1098-1102
• /
• 2008

To increase the ink transfer rate in the micro-gravure-offset printing, the liquid transfer process between two separating plates is investigated. During the liquid transfer process, in which one plate is fixed and the other one moves vertically, a sessile droplet is separated into two droplets. The volume ratio of the two droplets depends on the contact angles of the two plates. In a numerical study of the ink transfer processes, liquid transfer between two parallel separating plates and between a trapezoidal cavity and an upward moving plate are simulated, as models of the printing of ink from the offset pad onto the substrate and the picking up of ink from the gravure plate by the offset pad, respectively. Also, in experimental study, to obtain various surface contact angles, chemical treatment, plasma treatment, and electrowetting- on-dielectric (EWOD) surface are considered. The transfer rate between two plates is calculated by analyzing the droplet images. From the results, the optimal surface contact angles of the units of the micro-gravure-offset printing can be characterized.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.5
• /
• pp.633-641
• /
• 1999

Experiments were carried out to investigate the condensation heat transfer characteristics for R22 and its alternatives, R407C (R32/125/134a, 23/25/52wt%) and R410A (R32/125, 50/50wt%). A concentric tube heat exchanger was made to conduct condensation heat transfer tests. Mass flux and saturation temperature of refrigerants at the test section inlet were varied to get the corresponding heat transfer coefficients. Serial and parallel input of secondary fluid (water) were applied to the test subsections. Compared with existing correlations of condensation heat transfer, experimental heat transfer coefficients obtained in this study were generally higher than the predicted values, and mean absolute deviations from several correlations were shown. Wall subcooling was introduced to get a new correlation for condensation heat transfer coefficients by modifying Shah's equation. The RMS deviation of the measured heat transfer coefficients from the new correlation in this study for R22 is 9.9% and that for R407C and R410A are 10.2% and 14.6%, respectively.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.870-879
• /
• 2011

Regulated peak power tracking (RPPT) systems such as the series structure and the series-parallel structures are commonly used in satellite space power systems. However, these structures process the solar array power or the battery power to the load through two cascaded regulators during one orbit cycle, which reduces the energy transfer efficiency. Also the battery charging time is increased due to placement of converter between the battery and the solar array. In this paper a parallel structure has been proposed which can improve the energy transfer efficiency and the battery charging time for satellite space power RPPT systems. An analogue controller is used to control all of the required functions, such as load voltage regulation and solar array stabilization with maximum power point tracking (MPPT). In order to compare the system efficiency and the battery charging efficiency of the proposed structure with those of a series (conventional) structure and a simplified series-parallel structure, simulations are performed and the results are analyzed using a loss analysis model. The proposed structure charges the battery more quickly when compared to the other two structures. Also the efficiency of the proposed structure has been improved under different modes of solar array operation when compared with the other two structures. To verify the system, experiments are carried out under different modes of solar array operation, including PPT charge, battery discharge, and eclipse and trickle charge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1851-1856
• /
• 2013

An XML is widely used for web services, such as SOAP(Simple Object Access Protocol) and REST (Representational State Transfer), and also de facto standard for representing data. Since the XML parser using DOM(Document Object Model) requires a preprocessing task creating a DOM-tree, and then storing it into memory, embedded systems with limited resources typically employ a streaming XML parser without preprocessing. In this paper, we propose a new architecture for the streaming XML parser using an APSearch(Adaptive Parallel Search) on FPGA(Field Programmable Gate Array). Compared to other approaches, the proposed APSearch parser dramatically reduces overhead on the software side and achieves about 2.55 and 2.96 times improvement in the time needed for an XML parsing. Therefore, our APSearch parser is suitable for systems to speed up XML parsing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.914-917
• /
• 2008

A quad-functional built-in test circuit has been developed for DRAM-frame-memory embedded SOG-LCDs. The quad function consists of memory test, display test, serial transfer test, and parallel transfer test which is the normal operation mode for our SOG-LCD. Results of memory and display tests are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.44-44
• /
• 2000

Firstly, kinematic model of various type of wheels which includesskidding and skidding friction are presented. Tend, the transfer method of generalized coordinates which is useful to model the parallel mechanisms, can be applied to mobile robot by including such friction terms. Particularly, by appling the modeling method to mobile robot consisting of two conventional wheels and one caster wheel, forword/reverse kinematic modeling could be obtained without using pseudoinverse solutions.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1302-1308
• /
• 2006

The unsteady Hartmann flow of an electrically conducting, viscous, incompressible fluid bounded by two parallel non-conducting porous plates is studied with heat transfer taking the Hall effect into consideration. An external uniform magnetic field and a uniform suction and injection are applied perpendicular to the plates while the fluid motion is subjected to an exponential decaying pressure gradient. The two plates are kept at different but constant temperatures while the Joule and viscous dissipations are included in the energy equation. The effect of the ion slip and the uniform suction and injection on both the velocity and temperature distributions is examined.