• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.44-54
• /
• 2011

본 논문에서는 AMBA 기반 SoC의 코어 테스트 시간을 최소화 하는 것을 목표로 한다. 이를 위하여 테스트 대상 코어에 대해 병렬로 테스트를 수행하며 AMBA를 TAM으로 재사용 하는데 있어서 필요한 기술을 제안한다. 기능 테스트시의 AMBA 버스 제어를 위해 설계 된 TIC를 구조적 테스트 시의 제어에 재활용 하여 병렬 테스트의 제어에 필요한 추가 로직을 최소화 하였으며, 기능적 테스트를 수행할 수 있을 뿐만 아니라 구조적 테스트 시 병렬 테스트를 수행 할 수 있어서 SoC의 신뢰성 확보와 테스트 시간 단축에 기여 할 수 있다.

• Journal of Ship and Ocean Technology
• /
• 제8권3호
• /
• pp.26-39
• /
• 2004

A vessel/mooring/riser coupled dynamic analysis program in time domain is developed for the global motion simulation of a turret-moored, tanker based FPSO designed for 6000-ft water depth. The vessel global motions and mooring tension are simulated for the non-parallel wind-wave-current 100-year hurricane condition in the Gulf of Mexico. The wind and current forces and moments are estimated from the OCIMF empirical data base for the given loading condition. The numerical results are compared with the OTRC(Offshore Technology Research Center: Model Basin for Offshore Platforms in Texas A&M University) 1:60 model-testing results with truncated mooring system. The system's stiffness and line tension as well as natural periods and damping obtained from the OTRC measurement are checked through numerically simulated static-offset and free-decay tests. The global vessel motion simulations in the hurricane condition were conducted by varying lateral and longitudinal hull drag coefficients, different mooring and riser set up, and wind-exposed areas to better understand the sensitivity of the FPSO responses against empirical parameters. It is particularly stressed that the dynamic mooring tension can be greatly underestimated when truncated mooring system is used.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.77-84
• /
• 2023

The utilization of GPUs on general-purpose computers is currently on the rise due to the increase in its programmability and performance requirements. The utility of tools like NVIDIA's CUDA have been designed to allow programmers to code algorithms by using C-like language for the execution process on the graphics processing units GPU. Unfortunately, many of the performance and correctness bugs will happen on parallel programs. The CUDA tool support for the parallel programs has not yet been actualized. The use of a dynamic analyzer to find performance and correctness bugs in CUDA programs facilitates the execution of sophisticated processes, especially in modern computing requirements. Any race conditions bug it will impact of program correctness and the share memory bank conflicts to improve the overall performance. The technique instruments the programs in a way that promotes accessibility of the memory locations accessed by different threads well as to check for any bugs in the code of a program. The instrumented source code will be used initiated directly in the device emulation code of CUDA to send report for the user about all errors. The current degree of automation helps programmers solve subtle bugs in highly complex programs or programs that cannot be analyzed manually.

• 비파괴검사학회지
• /
• 제6권2호
• /
• pp.37-45
• /
• 1987

Speckle photography is a very useful method for measuring in-plane surface displacement. In its basic form, the object to be studied is illuminated with a divergent laser beam, and a double exposure photograph of the object is recorded, on a fine-grain film or plate, before and after the object is deformed, The magnitude and the direction of the displacement can then be obtained by measuring the spacing and the direction of the Young's fringe, which is produced by probing the developed negative with an unexpaned laser beam, and consists of a pattern of parallel equi-spaced dark bands. In this paper, a hybrid optical and electronic image processing is described-Young's fringe on the viewing screen is observed by a TV-camera and the 2-D video signal is converted from analog to digital and transfered to the computer where the spacing and direction of the fringes are calculated. Several examples of application show that the displacement magnitude and direction can be determined with an accuracy of $0.1{\mu}m\;and\;0.1^{\circ}$ respectively.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.13-18
• /
• 2016

Toshiba has developed a laser peening system for PWRs(pressurized water reactors) as well after the one for BWRs(boiling water reactors), and applied it for BMI(bottom-mounted instrumentation) nozzles, core deluge line nozzles and primary water inlet nozzles of Ikata Unit 1 and 2 of Shikoku Electric Power Company since 2004, which are Japanese operating PWR power plants. Laser pulses were delivered through twin optical fibers and irradiated on two portions in parallel to reduce operation time. For BMI nozzles, we developed a tiny irradiation head for small tubes and we peened the inner surface around J-groove welds after laser ultrasonic testing (LUT) as the remote inspection, and we peened the outer surface and the weld for Ikata Unit 2 supplementary. For core deluge line nozzles and primary water inlet nozzles, we peened the inner surface of the dissimilar metal welding, which is of nickel base alloy, joining a safe end and a low alloy metal nozzle. In this paper, the development and the actual application of the laser peening system for PWR power plants will be described.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.132-139
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue (HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.324-329
• /
• 2010

원자력발전소에서 사용되고 있는 연료봉은 지르코늄 합금 튜브에 동봉되어 있는 이산화우라늄 펠릿으로 구성되어 있다. 펠릿 표면은 원자로를 가동시키는 동안 국부 핫스팟을 예방하기 위해 튜브로 장전된 후 작은 구멍, 균열, 칩핑 결함이 없어야 한다. 본 논문은 X-선 단층촬영 시뮬레이션을 통하여 핵 연료봉 펠릿의 표면 결함을 검출하기 위한 타당성을 조사하였다. 병렬과 팬빔 여과후 역투영 방법을 이용하여 재구성된 영상은 시뮬레이션 데이터와 MPS(missing pellet surface) 영상데이터의 접근성을 확인하였다.

• 정보처리학회논문지D
• /
• 제10D권6호
• /
• pp.999-1010
• /
• 2003

프로그램 슬라이싱은 프로그램의 특정 지점에 나타난 변수의 값에 영향을 미치는 문장들을 프로그램으로부터 추출하는 방법이다. 프로그램 슬라이싱은 프로그램 디버깅, 프로그램 테스팅, 프로그램 통합, 병렬 프로그램 실행, 소프트웨어 메트릭스, 역공학, 유지보수 등 여러 응용 분야에 적용할 수 있다. 본 논문에서는 포인터 변수, 포인터 변수가 참조하는 객체, 배열, 구조체가 같은 복잡한 자료구조가 나타나는 프로그램에서 정확한 슬라이스를 추가하기 위한 알고리즘을 제안한다. 복잡한 자료구조가 나타나는 프로그램 상에서 객체의 보다 더 정확한 정적 분석 정보를 생성하기 위해 객체 참조상태 그래프를 제안하고, 그 효율성을 보였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.519-524
• /
• 2008

In the present study, the air-side heat transfer and pressure drop characteristics of the fin-tube and PF heat exchangers have been experimentally investigated under the cooling standard condition. Fin type of PF heat exchanger is a triangler and squarer form. The experimental data of the slit fin-tube and two kinds of PF heat exchangers are measured using the air-enthalpy calorimeter and the constant temperature water bath. As the inlet air velocity increases, the heat transfer rate and pressure drop of the heat exchanger increased. The heat transfer rate and pressure drop of PF-2 heat exchanger of the squarer fin is larger than that of PF-1 heat exchanger of the triangler fin. As the inlet air temperature increases, the heat transfer rate decreases and the pressure drop is nearly uniform.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.30-34
• /
• 2008

To evaluate the mechanical properties of in-service materials, tensile properties measurement using small-scaled specimen has been carried out. Tensile testing specimens with various dimensions, including standard and sub-size specimen specified in ASTM and ISO and small-scaled specimen, were prepared. Tensile strain in small-scaled specimen was measured using micro-ESPI system set up in this study. This system was used in the specimen with the parallel length of 2 mm and in subsequently measuring the strain under tensile loading. From each type of tensile specimen, stress-strain curves were determined. The dimension effect of the tensile properties was investigated comparing the tensile results obtained from standard specimens and small-scaled specimens. It was shown that the tensile strength for the small-scaled specimen is lower by 15% than those for the standard specimen.