• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.69-75
• /
• 2010

Today, our country is experiencing serious graying without parallel. The government is executing various services and welfare policies to solve this problem using ubiquitous technology. But the old and disabled people are not good for using the u-service and system, because it is made for ordinary people. The purpose of this study is to solve the graying society-problem and improve the eldery as well as disabled's quality of life by integrating each information centers based on ESB(Enterprise Service Bus). The results of this study can be divided by system architecture and communication system for the eldery and disabled. The research development results of this study can be used to build the integrated information center for u-service of the old people and disabled. It will contribute to realizing the Ubiquitous-society by promotion of young people's quality of life as well as the eldery and disabled.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.333-340
• /
• 2003

Doppler processing is the heart of pulsed Doppler radar. It gives a clutter elimination and coherent integration. With the improvement of digital signal processors (DPSs), the implementation using them is more widely used in radar systems. Generally, so as for Doppler processor to process the input data in real time, a parallel processing concept using multiple DSPs should be used. This paper implements a programmable Doppler processor, which consists of MTI filter, DFB and square-law detector, using 8 ADSP21060s. Formulating the distribution time of the input data, the transfer time of the output data and the time required to compute each algorithm, it estimates total processing time and the number of required DSP. Finally, using the TSG that provides radar control pulses and simulated target signals, performances of the implemented Doppler processor are evaluated.

• Journal of Society of Preventive Korean Medicine
• /
• v.6 no.2
• /
• pp.36-47
• /
• 2002

Over thousands of years oriental traditional medicine has developed a theoretical and practical approach to treat and prevent diseases and to promote people's health in China and Korea. In China, the integration of traditional Chinese medicine into the national healthcare system began in the late 1950s. This was in response to national planning needs to provide comprehensive healthcare services. On contrary to China, South Korea established the parallel operation of two independent medical systems in 1952. Hence there has been a political conflict between oriental and modern medicine over issues of fee, the ability to sell and prescribe herbal medicines, and the licensing of practitioners in traditional medicines. Given this background. This study is to compare peoples' attitudes and opinions for oriental traditional medicine by ethnicity (Chinese, Korean-Chinese and Korean). Chinese and Korean-Chinese were more used and satisfied with traditional medicine treatment and traditional practitioners compared with Koreans. The proportion of Koreans who reported the cost of traditional treatments was expensive was higher than those of Chinese and Korean Chinese. Most of Chinese, Korean-Chinese, and Koreans reported that they would use traditional medicine: 1) when they would have some disease to be treated best through traditional medicine; and 2) when traditional practitioner had a reputation and lots of experiences for those diseases. Most Korean people reported that oriental and western practitioners should cooperate each other to improve the quality of care. Therefore, policy framework including integration of traditional and western medicine, regulation, etc. is needed. In addition, research is needed to determine which diseases is treated best through traditional medicine.

• International Journal of Contents
• /
• v.14 no.3
• /
• pp.7-16
• /
• 2018

The extent and depth of the event plan determines the scope of pedagogical experience in situations and consequently the quality of immersive learning based on our simulated world. In contrast to planning in conventional narrative-based systems mainly pursuing dramatic interests, planning in virtual world-based pedagogical systems strive to provide realistic experiences in immersed situations. Instead of story plot comprising predetermined situations, our inter-event planning method aims at simulating diverse situations that each involve multiple events coupled via their associated agents' conditions and meaningful associations between events occurring in a background world. The specific techniques to realize our planning method include, two-phase planning based on inter-event search and intra-event decomposition (down to the animated action level); autonomous and independent agents to behave proactively with their own belief and planning capability; full-blown background world to be used as the comprehensive stage for all events to occur in; coupling events via realistic association types including deontic associations as well as conventional causality; separation of agents from event roles; temporal scheduling; and parallel and concurrent event progression mechanism. Combining all these techniques, diverse exogenous events can be derived and seamlessly (i.e., semantically meaningfully) integrated with the original event to form a wide scope of situations providing chances of abundant pedagogical experiences. For effective implementation of plan execution, we devise an execution scheme based on multiple priority queues, particularly to realize concurrent progression of many simultaneous events to simulate its corresponding reality. Specific execution mechanisms include modeling an action in terms of its component motions, adjustability of priority for agent across different events, and concurrent and parallel execution method for multiple actions and its expansion for multiple events.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.885-894
• /
• 2012

A numerical study of a microchannel steam methane reforming reactor has been performed to understand the characteristics of heat and mass transfer. The integration of Rh-catalyzed steam methane reforming and Pt-catalyzed methane combustion has been simulated. The reaction rates for chemical reactions have been incorporated into the simulation. This study investigated the effect of contact time, flow pattern (parallel or counter), and channel size on the reforming performance and temperature distribution. The parallel and counter flow have opposite temperature distribution, and they show a different type of reaction rate and species mole fraction. As the contact time decreases and channel size increases, mass transfer between the catalyst layer and the flow is limited, and the reforming performance is decreased.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.129-136
• /
• 2017

3D seismic data processing methods such as full waveform inversion or reverse-time migration require 3D wave propagation modeling and heavy calculations. We compared efficiency and accuracy of a Xeon Phi coprocessor to those of a high-end server CPU using 3D frequency-domain wave propagation modeling. We adopted the OpenMP parallel programming to the time-domain finite difference algorithm by considering the characteristics of the Xeon Phi coprocessors. We applied the Fourier transform using a running-integration to obtain the frequency-domain wavefield. A numerical test on frequency-domain wavefield modeling was performed using the 3D SEG/EAGE salt velocity model. Consequently, we could obtain an accurate frequency-domain wavefield and attain a 1.44x speedup using the Xeon Phi coprocessor compared to the CPU.

• Journal of the Korean Ceramic Society
• /
• v.43 no.6 s.289
• /
• pp.362-368
• /
• 2006

Epitaxial $Ba_{0.5}Sr_{0.5}TiO_3$ (BSTO) thin films have been grown on TiN buffered Si (001) substrates by Pulsed Laser Deposition (PLD) method and the effects of substrate temperature and oxygen partial pressure during the deposition on their dielectric properties and crystallinity were investigated. The crystal orientation, epitaxy nature, and microstructure of oxide thin films were investigated using X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Thin films were prepared with laser fluence of $4.2\;J/cm^2\;and\;3\;J/cm^2$, repetition rate of 8 Hz and 10 Hz, substrate temperatures of $700^{\circ}C$ and ranging from $350^{\circ}C\;to\;700^{\circ}C$ for TiN and oxide respectively. BSTO thin-films were grown on TiN-buffered Si substrates at various oxygen partial pressure ranging from $1{\times}10^{-4}$ torr to $1{\times}10^{-5}$ torr. The TiN buffer layer and BSTO thin films were grown with cube-on-cube epitaxial orientation relationship of $[110](001)_{BSTO}{\parallel}[110](001)_{TiN}{\parallel}[110](001)_{Si}$. The crystallinity of BSTO thin films was improved with increasing substrate temperature. C-axis lattice parameters of BSTO thin films, calculated from XRD ${\theta}-2{\theta}$ scans, decreased from 0.408 m to 0.404 nm and the dielectric constants of BSTO epitaxial thin films increased from 440 to 938 with increasing processing oxygen partial pressure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.432-445
• /
• 1994

From a theoretical analysis point of view, the 2-stage precipitator is decomposed into two units: charging cell and collecting cell. Collection efficiency predictions of the two-stage parallel-plate electrostatic precipitator have been performed theoretically incorporating with the charging and the collecting cells. Particle trajectorise passing the charging cell have been modeled as a simple one. Particle charge distribution at the outlet of the charging cell is calculated through integration of the present unipolar combined charging rate along the entire particle trajectory, and average charge of particles at the outlet of the charging cell is obtained from the particle charge distribution. As for the collecting cell, the diminution of particle concentration along the longitudinal direction of the collecting cell is investigated considering the conventional Deutsch's theory and the laminar theory. One should note that the collection efficiency formula derived is based on monodisperse aerosols. It has been confirmed through the analysis that predictions of particle charge by applying White's unipolar diffusion charging theory overpredict actual cases in the continuum regime, while predictions by Fuch's unipolar diffusion charging theory indicate the reasonable result in the same regime. Theoretical predictions of collection efficiency are also compared with the available experimental results. Comparisons show that the experimental results are consistently located in the collection efficiency region bounded by the two limits, the Deutsch and the laminar collection efficiencies. Finally design parameters of the 2-stage electrostatic precipitator have been investigated systematically through the one-variable-at-a-time method in terms of collection efficiency. Applied voltages on the corona wire of the charging cell and the plate of the collecting cell, and the average air velocity have been selected as the design parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.914-925
• /
• 1998

This paper considers the evaluation of the hybrid acquistion perdformance for the pilot signal in the direct sequence code division multiple access(DS/CDMA) forward link. the hybrid acquisition is introduced by the combination of two schemes, the parallel and serial acquisions. The mean acquisition time of the proposed scheme is derived to consider both the best case(the correct code-phase offsets are included i one subset) and the worst case(the correct code-phase offsets exist at the boundary of two subsets), which are cause by the distribution of the correct code-phase offsets in the subset. Expressions for the detection, false alarm, and miss probabilities are derived for the case of multiple correct code-phase offsets and multipath Rayleigh fading channel. Numerical results present the hybrid acquistion performance with repect to design parameters such as postdetectio integration length in the search and verification modes, subset size, and number of I/Q noncoherent correlators, and compare the hybrid acquistion with the parallel acquistion in terms of the minimum acquistion time under the same hardware complexity.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1445-1456
• /
• 2018

Environment perception and three-dimensional (3D) reconstruction tasks are used to provide unmanned ground vehicle (UGV) with driving awareness interfaces. The speed of obstacle segmentation and surrounding terrain reconstruction crucially influences decision making in UGVs. To increase the processing speed of environment information analysis, we develop a CPU-GPU hybrid system of automatic environment perception and 3D terrain reconstruction based on the integration of multiple sensors. The system consists of three functional modules, namely, multi-sensor data collection and pre-processing, environment perception, and 3D reconstruction. To integrate individual datasets collected from different sensors, the pre-processing function registers the sensed LiDAR (light detection and ranging) point clouds, video sequences, and motion information into a global terrain model after filtering redundant and noise data according to the redundancy removal principle. In the environment perception module, the registered discrete points are clustered into ground surface and individual objects by using a ground segmentation method and a connected component labeling algorithm. The estimated ground surface and non-ground objects indicate the terrain to be traversed and obstacles in the environment, thus creating driving awareness. The 3D reconstruction module calibrates the projection matrix between the mounted LiDAR and cameras to map the local point clouds onto the captured video images. Texture meshes and color particle models are used to reconstruct the ground surface and objects of the 3D terrain model, respectively. To accelerate the proposed system, we apply the GPU parallel computation method to implement the applied computer graphics and image processing algorithms in parallel.