• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.154-159
• /
• 2005

Low RF power density was used for preparing transparent conducting AI-doped ZnO (AZO) thin films by RF Magnetron Sputtering on Corning 1737 glass. The dependence of films' structural, optical and electrical properties on sputtering gas, film's thickness and substrate temperature were investigated. Low percent of incorporated H2 in Ar sputtering gas has proven to reduce film's resistivity and sheet resistance as low as $4.1\times10^{-3}{\Omega}.cm$. It also formed new preferred peaks orientation of (101) and (100) which indicated that the c-axis of AZO films was parallel to the substrate. From UN-VIS-NIR Spectrophotometer analysis, it further showed high optical transmittance at about $\~ 90\%$ at visible light spectra (400-700nm).

• Animal Systematics, Evolution and Diversity
• /
• v.30 no.2
• /
• pp.95-102
• /
• 2014

The four species of the suborder Holaxonia, Anthogorgia japonica Studer, 1889 of family Acanthogorgiidae, Astrogorgia rubra (Thomson & Henderson, 1906), Euplexaura attenuata (Nutting, 1910), and E. erecta (Kukenthal, 1908) of family Plexauridae have been newly recorded in Korea. They were collected from intertidal and sublittoral zones in the western and southern coasts and Jeju-do Island of Korea by SCUBA diving and fishing nets from 1969 to 2010. This study approaches holaxonians by focusing on external and internal morphologies including size, form, and color of colonies, branches, polyps, coenenchyme, axis, and spicules. Anthogorgia japonica is characterized by its planar growth form, dichotomously branched form, non-retractile polyps, and Astrogorgia rubra by arrangement of calyxes being situated in lateral side at stems and alternately in all sides at branches. Euplexaura attenuata is sparsely and laterally branched colony, and has straight wand-like stems. Euplexaura erecta has branches which run parallel to the main stem.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.1
• /
• pp.23-31
• /
• 1999

The dehydroxylation of kaolinite was investigated in detail by means of energy-filtering transmission electron microscope with both orientations parallel and perpendicular to c. The dehydroxylation could be characterized by the broad background including (0.211) band (20~24$^{\circ}$ 2$\theta$) on X-ray diffraction and by the three halo rings (d-spacing : 3.28~4.40$\AA$ (near (02,11) band), 2.41~245$\AA$ (near (20,13) band), 1.16~1.23$\AA$ (near (0.8,44) band)), and (02,11) and (20,13) spots on electron diffraction. These indicate existence of a short-range order along the a and b axes. Interplanar spacing of (001) is reduced to about 6.86$\AA$ and the sharp additional intensity maximum of about 14.2$\AA$ reveals that metakaolinite has a modulated structure along c axis. It is proposed that the modulated structure is attributed to the domains consisting of more than two-layers due to the changes of positions of the vacant octahedral sites in successive layers.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.216-220
• /
• 2015

Vertically oriented nickel nanowire arrays with a different diameter and length are synthesized in porous anodic aluminium oxide templates by an electrodeposition method. The pore diameters of the templates are adjusted by controlling the anodization conditions and then they are utilized as templates to grow nickel nanowire arrays. The nickel nanowires have the average diameters of approximately 25 and 260 nm and the crystal structure, morphology and microstructure of the nanowires are systematically investigated using XRD, FE-SEM and TEM analysis. The nickel nanowire arrays show a magnetic anisotropy with the easy axis parallel to the nanowires and the coercivity and remanence enhance with decreasing a wire diameter and increasing a wire length.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.78-85
• /
• 2011

This article investigates kinematic characteristics of a Sch$\ddot{o}$nflies motion generator which represents a mechanism having translational three Degree-of-Freedom (DOF) and rotational one-DOF motion about a fixed axis. The mechanism consists of the base plate and the moving plate, and four identical limbs connecting them. Each limb employs two revolute joints (RR), one parallelogram (Pa), and two revolute joints (RR) from the base plate to the moving plate. The mechanism is driven by four actuators which are placed on the base plate to minimize dynamic loads. It is shown through simulations that the mechanism can be designed to secure large dexterous workspace and thus has very high potential for actual applications such as haptic devices and high-speed requiring tasks such as pick-and-place operations, riveting, screwing tasks, etc.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.2
• /
• pp.91-95
• /
• 2005

Carbon composites were prepared with pitch-based round, C, hollow-type carbon fibers and pitch matrix. The thermal conductivities parallel and perpendicular to the fiber axis were measured by steady-state method. It was found that the thermal conductivities depended on the cross-sectional forms of the reinforcing fibers as well as the reinforcing orientation and carbon fiber precusors. Especially, mesophase pitch-based hollow carbon fiber-carbon composites had the most excellent thermal anisotropy, which was above 100.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.315-319
• /
• 2008

This paper describes a method for recognizing and measuring the motion of each individual leukocyte in microvessel from a sequence of images. A spatiotemporal image is generated whose spatial axes are parallel and vertical to vessel region contours. In order to enhance and extract only leukocyte traces with a turned velocity range even under noisy background, we use a combination of a filtering process using Gabor filters with sharp orientation selectivity and a subsequent 3D spatiotemporal grouping process. The proposed method is shown to be effective by experiments using image sequences of two kinds of microcirculation, rat mesentery microvessels and human retinal capillaries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.503-506
• /
• 2001

This paper presents leakage magnetic field and leakage inductance calculations in current transformer by means of 3-D Integral methods. From the distribution diagram of leakage magnetic flux to be analyzed using program called TRACAL3, it confirms a parallel to the winding axis direction of the leakage flux lines in the air gap between the windings. The leakage inductances L$\sub$r1/ and L$\sub$R2/ of the primary and secondary windings were calculated, their values are 4.23 mH and 0.49 mH, respectively. They are also similar to the measured values of the leakage inductances for the experimental verification, 4.06 mH and 0.47 mH.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2576-2578
• /
• 2005

In this paper, we address two position control scheme; the lead-lag control and the sliding mode control for a stage system, which is levitated and driven by electric magnetic actuators. This consists of a levitating object (called platen) with 4 permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. The sliding mode control algorithm is more effective than the lead-lag control algorithm to reduce effects from movements and disturbances of other axis.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.218-221
• /
• 1999

Magnetization measurements have been carried out on grain aligned Hg-1223 with the applied field parallel to the c-axis. The temperature dependence of the lower critical field H$_{cl}$(T) was determined by considering the effect of the surface barrier on the magnetization. H$_{cl}$(T) have been determined .from magnetic hysteresis loops within the framework of the modified Kim-Anderson critical-state model, where the surface barrier and the lower critical field are explicitly considered. At high temperature, H$_{cl}$(T) is identified as H$_p$(T). This results are agreed with the theory of Bean-Livinston surface barriers.