• 지질공학
• /
• 제13권2호
• /
• pp.257-266
• /
• 2003

본 연구에서는 포천, 거창, 합천 지역에 분포하는 주라기 화강암을 대상으로 미세균열 분포특성이 화강암의 물성과 역학적 이방성에 미치는 영향에 대하여 관찰하였다. 15종의 방향성 공시체를 대상으로 한 물성시험결과를 살펴보면 공극률과 흡수율은 대체로 비례하는 것으로 측정되었다. 또한 이들 공시체를 대상으로 한 P파 속도의 분포특성을 살펴보면 hardway에 수직한 H축 방향에서 고속도이고, rift에 수직한 R축 방향에서 저속도를 보인다. 3축에 평행하게 제작된 암석 공시체를 대상으로 압축강도시험을 실시하였으며, 강도는 미세균열들의 방향별 발달정도와 밀접한 관계를 보이고 있다.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.362-369
• /
• 2000

Via screw theory, a vibration mode can be geometrically interpreted as a pure rotation about the vibration center in a plane and as a twisting motion on a screw in a three dimensional space. In thi s paper, applying the conditions that can be used to diagonalize the stiffness matrix by a parallel axis congruence transformation, the vibration modes and frequency response of an elastically suspended optical disc drive have been analyzed. It is first shown that the system has one plane of symmetry, which enables one to decouple the complicated vibration modes into two sets of modes independent of each other. Having obtained the analytical solutions for the axes of vibrations, the frequency response for a given applied input force has been demonstrated. Most importantly, it has been explained that this research result could be used in the synthesis process of a linear vibration system in order to improve the frequency response.

• 터널과지하공간
• /
• 제20권3호
• /
• pp.217-224
• /
• 2010

비교적 균질한 3가지 화강암이 암석의 미세구조적 특성과 파괴인성 사이의 관계를 조사하기 위하여 연구되었다. 광학 현미경 관찰로 분석된 광물입자의 장축과 미세균열의 방위에 의하여 파괴인성 및 초음파 속도의 변화를 보였다. 가장 작은 값을 나타내는 파괴인성은 인장응력 방향과 수직하게 발달된 광물입자의 장축 및 미세균열의 방향이 주결에 일치할 때로서 파괴가 연약면인 광물입자의 장축이나 미세균열의 우세방향에 평행하게 전달될 때이다. SR 시편으로 측정된 파괴인성값은 1.63~2.62 MPa $m^{0.5}$의 변화를 보이며, 그 값들은 광물입자의 평균크기 및 미세균열의 평균길이와 관련된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.293-298
• /
• 2005

We calculate the coordinates of an axisymmetric nozzle with a central body. This nozzle ensures a transonic flow with a plane sound surface, which is orthogonal to the symmetry axis and has a wall kink at the sonic point, The Chaplygin transformation in the subsonic part of the flow leads the Dirichlet problem for a system of nonlinear equations. The definition domain of the solution in the velocity-hodograph plane is taken as a rectangle. This enables one to obtain the nozzle with a monotonic distribution of velocity along its subsonic part. In the nonlinear differential equation, the linear Chaplygin operator for plane flows is separated, which allows the iterative calculation of the solution. The supersonic part of the nozzle is calculated under the assumption that the flow at the nozzle exit is uniform and parallel to the symmetry axis; i.e., the supersonic jet outflows to the submerged space with the same pressure. The calculation is performed by the characteristic method. The exact solution of Tricomi equation for near-sonic flows with the straight sonic line is used to 'move away' the sound plane. The velocity distribution alone the supersonic part of the nozzle is also monotonic, which ensures the absence of the boundary-layer separation and, therefore, the adequacy of the ideal-gas model. calculations show that the flow in the supersonic part of the nozzle is continuous (compression shocks are absent)

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.132-139
• /
• 2004

The open section members have been used as the members of vehicle such as automotives, airplanes and trains. When vehicles are crashed, these members have absorption of the energy and it is necessary for retainment of the survival space, and as the result, the prediction for the displacement of members in this case of the crash of vehicles is very important. The displacements of members in this case of the crash of automotives show combined aspect of both axial collapse and bending collapse. In the rollover accident when bending collapse happen, the collapse of each members is progressed by the plastic hinge which made from bending moment, and therefore the research for the behavior of members under bending moment after collapse is necessary to determine the internal energy which the members can absorb and the deformed shapes of the members on the step of design. In this paper, the characteristics of bending collapse at the members of the open cross-section were studied with experiment and numerical analysis. We made a comparative studied of the result of the experiment, and changed the axis according to the parallel-axis theorem.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1921-1930
• /
• 1997

This paper presents the effective technique to design a six-axis load cell by using experimental design with an orthogonal array. A binocular structure is used as a basic sensing element for a load cell instead of the parallel plate structure. The finite element method is adopted to obtain strain distributions of the sensing element, and by doing the analysis of variances, its results are utilized in determining the factor which is more influential to the output strain. Calibration test results show that the developed six-axis loa cell with the maximum capacities of 196 N in forces and 19.6 N. m in moments is evaluated to be useful with the coupling error less than 2.5%.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.157-168
• /
• 1995

The effects of Mo additions on the microstructure and the room temperature deformation behavior of polysynthetically twinned (PST) crystals of TiAl were studied in order to get a basic conception for alloying additions on the two-phase TiAl compounds with the lamellar structure. It was found that the Mo additions in TiAl PST crystals increase both the yield stress and tensile elongation to fracture but the increase in yield stress deppend on the angle $\Phi$at which the lamellar boundaries lie from the loading axis. The large difference in yield stress between specimens deformed parallel($\Phi = 0^\circ$)or perpendicular($\Phi = 90^\circ$) to the loading axis and those deformed in intermediate orientations could be plained by the difference in Mo content between the TiAl and the $$Ti_{3}Al$ phases. It was also found that the Mo-doped specimens with intermediate orientation fail by cracking zigzag across to the lamellar boundaris, which is the same fracture mode as that of binary specimens with intermediate orientations tested in vacuum This suggests that Mo atoms are thought to play a role to reduce the environmental embrittlement of binary PST crystals, resulting in increasing the tensile ductility.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.184-187
• /
• 1994

Czochralski 방법에 의해 성장된 $CsMnCl_{3}$ 단결정에서 $^{133}Cs$의 핵자기 공명을 Bruker FT NMR 분광기를 이용하여 연구하였다. 두 개의 다른 무리의 $^{133}Cs$ 공명선이 관측되었다. : 서로 다른 intensity를 갖는 두 cesium 스펙트럼에 속하는 여러 transition이 분석되었다. Cs(I)의 핵 사중극 결합상수는 $0.15{\pm}0.01$ MHz이고, Cs(II)는 $0.21{\pm}0.01$ MHz이다. 비대칭인자는 두 경우에 대하여 영이고, 일들 두 경우의 EFG 텐서의 주축은 같았다. EFG 텐서의 가장 큰 성분을 만족하는 Z 축은 결정학적인 c축과 나란한 방향임을 알았다.

• 천문학회보
• /
• 제41권2호
• /
• pp.33.2-34
• /
• 2016

The unification model of active galactic nuclei invokes the presence of a thick molecular torus that hides the broad emission line region from a line of sight toward observers with low latitude. It is expected that the illuminated side of the molecular torus may be photodissociated by strong far UV radiation from the central AGN, forming an H I region with a high neutral column density. We propose that the Rayleigh scattering optical depth of this HI region can be significant for most broad $Ly{\alpha}$ line photons with the Doppler factor not exceeding 104 km s-1. Rayleigh scattered $Ly{\alpha}$ photons can be characterized by strong linear polarization depending on their scattering optical depth. We performed Monte Carlo simulations of polarized radiative transfer of $Ly{\alpha}$ adopting simple scattering geometries relevant to the unification model of AGN. We find that for a low torus the Rayleigh scattered $Ly{\alpha}$ is polarized in the direction parallel to the symmetry axis with the polarization degree dependent on wavelength. In the case of a high torus, the core part of $Ly{\alpha}$ is polarized in the direction perpendicular to the symmetry axis whereas the wing part is parallelly polarized. We conclude that careful spectropolarimetry around $Ly{\alpha}$ can be useful in testing the AGN unification model.

• 대한화학회지
• /
• 제7권4호
• /
• pp.257-263
• /
• 1963

The crystal structure of nicotinic acid hydrochloride has been determined by two-dimensional x-ray method. The unit cell is monoclinic with a = 7.21 ${\AA}$, b = 6.69 ${\AA}$, c = 7.54 ${\AA}$, ${\beta}=100^{\circ}$, space group $C{\frac{2}{2}}-P2_1$, and contains two formula units. Weissenberg diagrams have been taken along the a, b and c axes with Cu K${\alpha}$ radiation and the positions of the atoms have been fixed by means of two dimensional Patterson syntheses, a Fourier projection along the b-axis and trial and error method. The bond lengths are: pyridine ring C-C = 1.38, 1.39 ${\AA}$, C-N = 1.34, 1.36 ${\AA}$, carboxyl group $C_4-C_6$ = 1.46 ${\AA}$, $C_6-O_1$ = l.33 ${\AA}$, $C_6-O_2$ = 1.19 ${\AA}$. The ring nitrogen atom may be regarded as forming bifurcated hydrogen bond with an oxygen atom $O_2$ of one neighbouring molecule and with a neighbouring chlorine atom, being linked by forming a hydrogen bond with an other oxygen atom $O_1$ of above mentioned neighbouring molecule, in such a way that chains parallel to the c-axis are formed.