• 인지과학
• /
• 제10권3호
• /
• pp.17-28
• /
• 1999

양안 부등 정보에 근거하여 모사 된 타원형 및 포물선형 반원주체가 관찰거리가 변화함에 딸 체계적으로 왜곡되어 지각되었다. 실험1과 실험3의 두 가지 관찰조건 모두에서, 타원형 반원주체는 45 cm의 관찰거리에서는 실제 모양과 근사하게 지각되었으나 135 cm의 관찰거리에서는 실제 곡면성의 75%로 과소 평가되어 지각되었다. 실험2에서는, 관찰거리에 대한 정보가 풍부할 때, 포물선형 반원주체가 45 cm의 관찰거리에서 실제 곡면성에 비해 118%의 곡면 성을 갖는 것으로 과장되어 지각되었으며, 90 cm의 관찰거리에서는 실제에 근접하여 지각되었고, 135 cm의 관찰거리에서는 실제 곡면성에 비해 85%로 과소 평가되어 지각되었다. 관찰거리에 대한 정보가 감소된 관찰조건에서는 모든 관찰거리에서 실제의 곡면 성 보다 다소 과소 평가되어 지각되었다. 예를 들어, 45 cm의 관찰거리에서는 실제 곡면성에 근접하여 지각되었고, 135 cm의 관찰거리에서는 실제 곡면성에 비해 68%로 과소 평가되어 지각되었다. 이러한 실험 결과들은 시각기제가 양안 부등을 추정한 관찰거리로 척도와(scale) 하여 3차원 모양을 표상 하게 된다는 설명을 지지하고, 이에 대립되는 가정, 즉 거리에 따라 변하지 않는 부등 곡률(disparity curvature)을 탐지해 냄으로써 3차원 모양을 직접 지각할 수 있다는 가정이 타당하지 않음을 시사한다.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.436-441
• /
• 2020

Wave field changes resulting from artificial coastal structures constructed in coastal zones have emerged as a major cause of beach erosion, among other factors. The rates of erosion along the eastern coast of Korea have varied mainly owing to the construction of various ports and coastal structures; however, impact assessments of these structures on beach erosion have not been appropriately conducted. Thus, in this study, a methodology to assess the impact of erosion owing to the construction of artificial structures has been proposed, for which a parabolic bay shape equation is used in determining the shoreline angle deformation caused by the structures. Assuming that the conditions of sediment or waves have similar values in most coastal areas, a primary variable impacting coastal sediment transport is the deformation of an equilibrium shoreline relative to the existing beach. Therefore, the angle rotation deforming the equilibrium of a shoreline can be the criterion for evaluating beach erosion incurred through the construction of artificial structures. The evaluation criteria are classified into three levels: safety, caution, and danger. If the angle rotation of the equilibrium shoreline is 0.1° or less, the beach distance was considered to be safe in the present study; however, if this angle is 0.35° or higher, the beach distance is considered to be in a state of danger. Furthermore, in this study, the distance affected by beach erosion is calculated in areas of the eastern coast where artificial structures, mainly including ports and power plants, were constructed; thereafter, an impact assessment of the beach erosion around these areas was conducted. Using a proposed methodology, Gungchon Port was evaluated with caution, whereas Donghae Port, Sokcho Port, and Samcheok LNG were evaluated as being in a state of danger.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.535-540
• /
• 2011

It is well known that abrasive waterjet (AWJ) was developed as a kind of high-density energy processing technologies. AWJ is used to obtain cutting quality of various materials such as metal, ceramics, glass and composite materials within a short manufacturing time because of the characteristics of heatless and noncontact processing. However, surface roughness and dimension error like round, burr, taper vary severely according to the processing conditions such as pressure, cutting speed, orifice diameter, stand off distance and abrasive flow rate. In this paper, the effect of the shape of mixing chamber on surface quality is studied. Three types of mixing chamber - round, parabolic, elliptical - are suggested and each performance is compared to that of cylindrical mixing chamber experimentally. From the result, is proved to be the optimal mixing chamber in the aspect of surface quality the parabolic one.

• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.934-939
• /
• 2012

This paper proposes a new algorithm for ultrasonic sensors arranged on ring frame to identify obstacles surrounding itself by TOFs (time of flight). The ring frame has multiple channels consisting of a transmitter and a receiver. When the transmitter of a selected channel transmits ultrasonic signal, the TOFs of reflected signals from obstacles are acquired by the receiver of the channel. The process continues for all channels consecutively. Then, by using parabolic curve fitting of TOFs of all channel, the proposed algorithm not only calculates distances from multiple obstacles, but also identifies if the shape of obstacles are point or plane by the coefficients of the curve. By the experiment using 16 ultrasonic transceivers on the ring frame in the environment of two poles and two planes, we show the feasibility of the proposed scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1613-1616
• /
• 2005

In this paper, we developed an algorithm of generating cam contour curve for hinge mechanism of folder-type mobile phone. The main feature of this hinge mechanism is that we can operate uniform torque to open or close the mobile phone. We divided the opening or closing intervals of the cam into finite sub-intervals, and then we determined the cam contour curve of each sub-interval as a parabolic curve. Finally, these finite parabolic curves form the total cam contour. We can design single cam, which composed moving cam with contour curve and fixed cam that plays only roller, and twin cam with contour curve that is made up the pair of two cams symmetrically.

• ETRI Journal
• /
• 제29권6호
• /
• pp.817-819
• /
• 2007

A low-stress organic polymer membrane is proposed as a deformable mirror that can be incorporated into a cellular phone camera to achieve auto focusing without motor-type moving parts. It is demonstrated that our fabricated device has an optical power of 20 diopters and can switch focus in 14 ms. The surface roughness of the organic membrane is measured around 15 nm, less than ${\lambda}$/20 of the visible light. With curve fitting, we found that the actuated membrane is almost parabolic in shape, which leads to less aberration than spherical surfaces. It is suitable for reflective-optics systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.819-823
• /
• 2003

The differential equations governing the shape of displacement for the shallow parabolic arch subjected to multiple dynamic point step loads were derived and solved numerically The Runge-Kutta method was used to perform the time integrations. Hinged-hinged end constraint was considered. Based on the Budiansky-Roth criterion, the dynamic critical point step loads were calculated and the dynamic stability regions for such loads were determined by using the data of critical loads obtained in this study.

• 한국광학회지
• /
• 제4권4호
• /
• pp.390-396
• /
• 1993

1차원 telecentric paraxial holographic kinoform을 푸리에변환 렌즈로 사용하는 경우에 있어서, 3가지 표면양각형태, 즉 평면-볼록면, 블록면-평면, 좌우대칭 불록면에 대하여 스넬의 법칙을 기반으로 하는 엄밀한 광성추적법을 적용하여 분석하였다. kinoform은 F/8, 초점거리 15mm이며 kinoform과 그 주변 매질의 굴절율을 변화시키므로써 zone수와 두께 그리고 포물면의 경사도를 변화시켰다. 일반적으로 좌우대칭 볼록면 형태가 가장 좋은 성능을 갖는 것으로 나타났고, 모든 경우에 있어서 포물면의 경사도가 증가함에 따라 입사각의 증가에 따른 성능이 저하되었다.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.371-375
• /
• 2013

To improve the utilization efficiency of solar energy, a new solar optical concentrating system composed of a parabolic reflector with a square cross-section, a hyperbolic reflector with a square cross-section and two converging convex lenses has been designed. The proposed method can simultaneously focus and shape sun light into a square pattern on the solar panel. In addition, the total reflection property of photonic crystal within the range of the visible sunlight spectrum has been analyzed. Finally, the relationship between solar concentrating multiples and the diameter of the primary mirror has been discussed.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.273-278
• /
• 2009

월파형 파력발전장치는 월류된 파랑으로 인하여 발생한 수두차를 이용하여 터빈을 구동하는 일종의 파랑에너지 변환장치로써 파랑에너지를 전기 에너지로 변환하는 장치이다. 본 연구는 상용 CFD코드 인 Fluent를 사용하여 수치 조파수조를 구현하여 월파형 파력발전장치의 해석에 도입을 하여 입사파 조건과 형상에 대한 계산을 수행하였다. 최적의 월류성능을 나타내는 구조물 사면형상을 도출하기 위하여 직선형과 포물선형을 채택하여 비교분석을 수행한 결과 포물선형 사면경사를 갖는 구조물이 더 우수한 월류성능을 보인다는 것을 확인 하였다.