• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.67.1-67
• /
• 2002

We describe the looper controller design for a hot strip mill. The looper is to control the strip tension which influences on the width of the strip. It is very important to control the looper control of the hot strip mill, but difficult to control the looper, because there exists on mutual interaction among strip gauge, looper angle, and strip tension. In this paper, we present the modeling for the hot strip finishing mill to control the tension of the strip and suggest a cross control method of full-stand hot strip finishing mill. The cross control is a very simple method that allows non-interacting control.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.991-997
• /
• 2013

In this paper, we propose a CFWC (CCD and fuzzy PID based width control) scheme to obtain the desired delivery width margin of a vertical rolling mill in hot strip process. A WMS(width measurement system) is composed of two line scan cameras, an edge detection algorithm, a glitch filter, and so on. A dynamic model of the mill is derived from a gauge meter equation in order to design the fuzzy PID controller. The controller is a self-learning structure to select the PID gains from the error and error rate of the width margin. The effectiveness of the proposed CFWC is verified from simulation results under a width disturbance of the entry in the mill. Using a field test, we show that the performance of the width control is improved by the proposed control scheme.

• 아시안잔디학회지
• /
• 제6권1호
• /
• pp.11-22
• /
• 1992

To determine the use of waste materials as root zone soil mixtures for turfgrass culture, the effects of paper mill sludge and briquet ash on physical and chemical properties of soil and growth of turfgrasses were examined. Three turfgrass species of zoysiagrass(Zoysia japonicaSteud.). kentycky bluegrass(Poa pratensis L. 'Ram I') and creeping bentgrass(Agrostis panistris Huds 'Persucross') were cultured in 32cm diameter plastic pots containing various soil mixtures. The basic ingredients used for mixtures included sand(SD), field soil(SL), paper mill sludge(PS), sphagnum peat moss(PM) and briquet ash(BA). Seven combinations using these ingreients were mixed in different percentage by volume as follows: SD+SL+PM(80:10.10), SH+SL+PS(80:10:10), SD-PM(80:20), SD+PS (80:20), SD+BA(80:20), SD+BA+PM(60:20:20) and SD+BA+PS(60:20:20). 1. Paper mill sludge showed pH of 6.6, more than 30% of organic matter content, and higher concentrations of total N, P, k, Ca, Mg and CEC. Bulk density, fild moisture capacity and electrical conductivity of soil mixtures were increased by the comimation of 10~20% PS by volume. 2. Briquet ash showed pH of 8.0, and higher levels of P, k, Ca and Mg than those of field soiks. Bulk density, field moisture capacity and hardenss of soil mixtures were increased but vertical water flow rate and electrical conductivity were decreased by the combination of 20% BA by volume. 3. Phytotoxic effects of PS and BA on growth of turfgrasses were not found. Shoot growth of all three species was higher in soil combination of SD+BA+PS than that of SD+SL+PM added with fertilizer. However, root growth was better in soil mixtures combined with PM. Soil mixtureomposed of 60% SD, 20% BA and 20% PS by volume was most effective on growth of all three species. 4. Paper mill sludge resulted in higher N level in the leaf tissue. The contents of heavy metals such as Cd and Ph did not vary significantly among soil mixtures and species. However, the Mn level was 2~3 times higher in plants growh in mixtures containing PM compared with others, and especially it was higher in creeping bentgrass than other species.

• 유기물자원화
• /
• 제12권4호
• /
• pp.130-138
• /
• 2004

서로 다른 지역에서 발생한 음식물 쓰레기에 제지슬러지, 인분케익을 혼합하여 부숙시킨 후, 부숙기간에 따른 음식물 쓰레기의 이화학적 성상 및 줄지렁이의 섭식반응 및 생체량 변화를 조사하였다. 발생지역에 따른 음식물 쓰레기의 이화학적 성상은 큰 차이가 없는 것으로 나타났으며, 지렁이가 섭식하기에는 음식물 쓰레기내의 염분 농도가 전반적으로 높게 나타났다. 음식물 쓰레기에 인분케?을 혼합하여 부숙시켰을 때보다 제지슬러지를 혼합, 부숙시켰을 경우 염류농도 저하효과가 높게 나타났으나, 지렁이의 섭식효율과 생장률을 크게 개선시킬만큼 효율적이지는 않은 것으로 나타났다. 따라서 음식물 쓰레기에 대해서 지렁이 처리법을 적용시키기 위해서는 음식물 쓰레기내의 염류농도를 저하시키는 방법의 개발이 선행되어야 할 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.163.3-163
• /
• 2001

This paper presents the two-step strategy method of performing optimal scheduling of paper mill processes using MINLP (Mixed-Integer Non-Linear Programming) considering the trim loss problem in sheet cutting processes. The mathematical model for a sheet cutting process in the form of MINLP is developed in this study, and minimizing total cost is performed considering the cost of raw paper roll, :hanging cutting patterns, storage of over-product and recycling/burning trim. The paper has been used to deliver and conserve information for a long time, and it is needed to have various sizes and weights ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1276-1278
• /
• 1999

This paper proposed the optimal operational scheduling of cogeneration system for paper mill connected with several auxiliary devices. Auxiliary devices that include auxiliary boiler, waste boiler and sludge incinerator operate with multi-cogeneration system. Especially environment element was considered in objective function to solve environment problem. Electricity can be purchased through power system from utility. The proposed operational strategy on cogeneration system for paper mill to increase energy efficiency can be applied to the similar cogeneration system in industrial field.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.54-60
• /
• 2002

The Wastewater of toilet paper mill recycling recovered milk carton was used as a raw material for this study. According to the actual mill conditions, hydraulic retention time was adjusted to 12 hours and F/M (Food/Micro-organism) ratio was adjusted to 0.23. Temperature of aeration basin was varied from 2$0^{\circ}C$ to 5$0^{\circ}C$. The change of Micro-organisms and removal efficiency of pollutant were investigated at the varied temperature of basin. Aeration basin using high thermal microbial inoculants showed more removal efficiency of SS, COD than aeration basin using conventional microbial inoculants at high temperature. Floc consolidation of aeration basin using high thermal microbial inoculants added sludge was better than that of sludge from aeration basin using conventional microbial inoculants.

• 에너지공학
• /
• 제8권4호
• /
• pp.512-518
• /
• 1999

본 논문은 각종 보조운전설비가 연계된 제지공장용 열병합발전시스템의 합리적인 운전계획을 수립하는 기법을 제시하였다. 보조운전설비로서는 보조보일러, 폐열보일러 및 슬러지 소각로가 있으며, 이 설비들이 다기 열병합발전시스템과 연계하여 운전되고 있다. 최적운전계획은 특히 환경을 고려하기 위해 목적함수에 환경요소를 추가하여 수립하였다. 전력은 구매할수있도록 전력회사와 연계되어 운전된다. 본 논문에서 제시한 최적운전계획기법은 제지공장의 에너지이용률을 향상시키는데 기여할 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1323-1326
• /
• 2003

In this paper, we propose set-up model of silicon steel cold rolling mill. Until now, the working of Silicon Steel is operated using the look-up table value of roll force which a field operator finds by making good use of his experience. Therefore, the standardization of data and an improvement of the quality on product are very difficult. So we establish neural model using field data of various kinds of coil at each pass.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.196-201
• /
• 1997

The biggest challenge facing today's manufacturing industry is better quality and high productivit. From an economic point of view, productivity is the most important parameter, as high productivity will reduce the cost. However, the customers of today are not only cost concerned, but also quality conscious. So high accuracy levels should also be achieved in the manufacturing process. The aim of this paper is to get a comprehensive understanding of its machinability properties and to investigate the relationship between cutting conditions and surface roughness for Ball End Mill cutting process so as to enhance its practical application.