• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2003

Analytical chemists frequently use filter papers during the course of experiments without any hesitation. However, the results of analysis could be deteriorated by the various ions which are extracted from filter papers. In some filter paper made for qualitative use, about $300{\mu}g$ sodium and many other cations were detected. Although the quantities of contaminants was low in the filter paper made for quantitative use, significant amount of Fe, Si, Al, Cu and Zn was detected as well as alkali element. Many cations and anions were also detected in the filtrate obtained from the glass fiber filter.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.67-74
• /
• 2004

This study was carried out to investigate the characteristics of handsheets made from nonwoody New-Zealand hemp (Phormium tenax) fibers that was not used before in Korea. The results were as follows : 1. Physical properties of bleached phormium fiber were satisfactory for handsheet forming. Specially, tensile strength was improved by adding bleached phormium fiber. 2. Opacity of handsheet with phormium pulp was fine, therefore it can be useful fiber to improve opacity of light-weight printing paper. 3. Filler retention rate was improved when phormium pulp was added, while drainage time was increased. 4. Phormium fiber has good characteristics as pulp for paper manufacture. So it can be valuable non-wood fiber resource if drainage problem is solved.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.81-86
• /
• 2000

Hanji is a traditional handmade paper, which has been famous for its excellent qualities in strength, whiteness, gloss, and smooth feel in painting and writing in ancient Far East for many years. Nowadays, however, its old fame has declined and it has been used only in limited extent such as in traditional Korean brush painting and writing. In this study, 9 kinds of commercial handmade papers made in Korea, China, and Japan were collected and their printing and writing properties were evaluated by image analysis. Chinese handmade paper showed the best result in absorption area of China ink, the roundness and feathering of China ink blots, followed by Hanji. Abrasion coefficient of the Chineses papers was higher than that of the others, which was regarded to contribute to the difference in touch feeling of the writing brush on the papers. It was shown that absorption rate and blot area of China ink were increased by Dochim. Hanji which has recently been made by so called \"traditional method\" showed no quality difference from the modified Hanji.ied Hanji.

• Advances in environmental research
• /
• v.9 no.4
• /
• pp.285-294
• /
• 2020

Growth of any country rest in the consumption of industrial wastes for its infrastructure amenities. Countries like India positively desires a vital utilization of industrial waste resembling paper sludge in the construction industry to make various building materials. Also, it is the duty of all civil engineers or researchers to attach them in mounting new materials from the waste dumped as land fillings. In every construction project, about 70% of cost accounts for the procurement of materials. If this, can be minimized consequently the cost of construction will certainly be condensed. Research has established that the waste paper sludge can be reused in the construction field for a probable scope. The construction diligences munch through a massive quantity of non-renewable resources. On the additional dispense, more waste paper board sludge ends up in landfills or dumpsites than those recycled. Consequently, waste paper sludge for use as a construction material composes a step towards sustainable development. Keeping this in mind an endeavor has been made to utilize paper board sludge acquired from the paper board industry and used with several pozzolanic and cementitious materials for a specific purpose. The addition of paper sludge has been varied from 0% to 20% by weight of cement. The tests done with the samples expose that four samples showed significant outcomes with remarkable strength and durability properties which guide to move for the next phase of research for producing lightweight tiles.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.199-200
• /
• 2007

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.2
• /
• pp.34-39
• /
• 2009

The traditional Korean hand-made papers (Hanji) were dyed with colorant extracted from flowers of Sophora japonica L.(pagoda tree), and the effect of various dyeing factors (mordant, mordanting method, pH of dyeing solution, etc.) on colors and K/S values of the dyed Hanji was investigated. Changing mordant affected the color of dyed Hanji. Mordanting with alum, copper acetate made the color of dyed Hanji more yellow, but dyed Hanji mordanted with $FeCl_2$ had dark olive color. The K/S value of the dyed Hanji mainly depended on the pH of the dyeing solution and mordanting method. It was found that sim-mordanting with alum was timesaving and effective dyeing method. The dyed Hanji sim-mordanted with alum had the highest K/S value at low pH (about 4).

• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.714-722
• /
• 2003

Men's clothing has been recently giving higher market shares to the ready-made clothes rather than the custom-tailored clothes. With many active studies on the human body and design, the ready-made clothes win popularity due to their rapid repairing, various design, and cheap prices, though they are not perfect suitable for some people. Therefore the ready-made has a weak point unable to consider all of the individual physical characteristics. However the custom-tailored clothes ate able to make clothing perfectly suitable lot their customers, though they require longer time-taking and expensive costs. In this context, this paper is design and implementation an automatic design edit system to provide a rapid and cheap service for customers on the ground of the custom-tailored clothes. In other words, this paper intended to use computer systems lot rapidly and precisely providing design dependent on the individual physical characteristics including a distorted bodies, types of the leg, and a height of the shoulder. To do so, the paper using not only studies on the human body and the custom-tailored clothes but also technical know-hows planned design for each individual body by LISP language and automatically process the design through CAD system. Consequently, the rapid and precise processing has reduced inventories and production costs, leading to supplying high quality clothes at lower prices.

• Journal of the Korean Professional Engineers Association
• /
• v.29 no.5
• /
• pp.104-110
• /
• 1996

The problem of the museum is not only so-called "cement poison". This article comprehensively discussed other problems related with museum from the viewpoint of the presservation of cultural properties made with paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.411-412
• /
• 2009

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.49-56
• /
• 2011

Mulching technique is used to control the temperature and moisture content of soil by covering the ground surface. Most kinds of mulching film are made of polyethylene which is non-biodegradable synthetic polymer. Utilizing these films has been one of the main sources in soil pollution. Thus residual films under the ground should be removed after a certain period of time. Therefore, an alternative mulching material made of biodegradable functional paper is considered instead of non-biodegradable films. The mulching sheet produced from paper basis has a functionality to be naturally degraded and then recycled to the bio-materials on soil. In this study, the paper based-mulching sheet coated with biodegradable polymer was specially produced using a laboratory bar coater. Coating colors prepared by dissolving PBS/PLA in chloroform were applied to kraft paper. The mechanical strength and aging properties of this mulching sheet were investigated. The burst strength of polymer-coated paper was decreased with the increase of the PBS ratio in PBS/PLA blends, and, in particular, 30/70 blending condition led to good stability in heat-aging atmosphere for 60 days.