• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.63-69
• /
• 2012

The rice husk is one of the major agricultural residue in KOREA. In this paper, the effects of various pulping conditions on the properties of rice husk pulp and handsheets made of rice husk fiber were evaluated in order to utilize the rice husk as an alternative source for wood pulp. Two typical alkali pulping, such as soda pulping and Kraft pulping were applied with various conditions of the pulping processes. The higher effective alkali and higher pulping temperature resulted in the higher efficiency in removal of lignin and ash, which leaded to the higher strength properties of handsheets made of rice husk fiber, but the lower yield of rice husk pulp. The better efficiency in production of rice husk pulp and the stronger handsheets were obtained by the Kraft pulping.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1161-1169
• /
• 1999

This research was aimed to identify the artifact type and their characteristics of the textile related materials excavated from Koryo Dynasty tombs of Hyungok-ni Danyang. Microscopy solubility test energy dispersive X-ray spectroscopy(EDS) and fourier transform infrared spectroscopy (FT-IR) fabric density test were used for the identification and when necessary standard samples were made in order to compare its characteristics with hose of the original artifact, the result indicated that the artifacts included both textile and paper. Artifacts from Burial 14 were comprised of textile fragments FT-IR and the solubility test conducted on the artifact indicated that the textiles were made with ramie woven with plain weave technique in a fairly loose fabric density. Rest of the artifacts were all comprised of paper.

• Electrical & Electronic Materials
• /
• v.10 no.4
• /
• pp.334-341
• /
• 1997

Streaming electrification on insulating paper and pressboard under D.C. and A.C. electric field was investigated by using paper tubes and oil circulation apparatus. At first, flowing of static charges as measured with no electric field. As the temperature of oil increased, the measured current curve hows peak. As the velocity increased, it shows increasing exponential curve. Then, we applied A.C. and D.C. electric field on paper tube and the current from relaxation tank to earth was measured, which other factors such as temperature and velocity were varied like case of no electric field. The ions in oil carry the charges. So electric field makes asymmetry effect, and electrophoretic effect on ions in oil. We find that as the electric field intensity increased, the charges which were made by electric double layer were increased. The charge vs. velocity curve made peak point at a velocity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1633-1641
• /
• 1996

In this paper we propose a new method for anlayzing the properties of surface reflectance and reconstructing the shape of object using estimated reflectance parameters. We have investigated the hybrid reflectance surface which has specularreflection and diffuse reflection, which can be explained by Torrance-Sparrow model. Sample sphere made on one maerial is used to estimate the reflectance properties by using LMS algorithm. We can make the reference image which consists of surface normal and brightness value using estimated reflectance parameters, and thenarbitrary shape object made of the same material as sample can be reconstructed by matching with reference image. Photometric matching method proposed in this paper is robust because it mateches object image with the reference imageconsidering its neighbor brightness distribution. Also, in this paper plate diffuse illumination is used to remove intensity disparity with simple scheme. It is expected that the proposed algorithm can be applied to 3D recognition, vision inspection system and other fields.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.100-107
• /
• 1998

With the rapid development of Urban Mass Transit in China, the Intelligent Transport System becomes inevitable. Based on the brief introduction of the blueprint of Urban Mass Transit in Shanghai, this paper analyses in detail the components and functions of Automatic Train Control (ATC) system applied in Shanghai Metro, presents the key technology of the main three subsystems of the ATC system : Automatic Train Supervision (ATS) subsystem, Automatic Train Protection (ATP) subsystem, Automatic Train Operation (ATO) subsystem. After reading this paper, you will have an general grasp of ATC system. At the end of the paper, it suggests a good resolution about the ATC system equipment to be made in China. If you are interested in the resolution, we'd like to exchange our thought.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.296-301
• /
• 1999

Different papers such as toilet and towel tissue, newsprint and copy paper made from reclaimed fibres were characterized using UV-VIS reflectance and fluorescence spectroscopy. The emission properties of the extracts of the papers were also evaluated. Photochemical irradiation at ambient temperatures, and thermal aging of the copy papers at 105$^{\circ}C$ and 150$^{\circ}C$ were performed. Post-colour numbers (PC) were calculated from the reflectance values measured from the corresponding UV-VIS reflectance spectra. Light absorption coefficient spectra were calculated before and after irradiation, and the changes in absorption coefficient were related to the content of chromophores in the papers. Photochemical and thermal discolouration of the copy papers, similar to that of virgin fibres, was readily observed. The influence of changes in the concentrations of fluorescent brightening agents and dyes on the spectral properties was also assessed. Photostabilization studies of the copy papers were performed with the use of polymer additives polyethylene glycol (PEG) and polytetrahydrofuran (PTHF).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.35-42
• /
• 2014

Many historical archives have been deteriorated by aging with time. Various kinds of defects such as worm-hole, yellowing, brittleness are observed and their severity was dependent on raw material type, storage condition, and so on. For a long-term use and storage, a proper preservation treatment is required. Many studies on preservation and conservation have been carried out on hanji which was made from mulberry fiber, but there are few concerns on foreign paper. Therefore, aging and chemical strengthening treatment was done on paper made of bamboo and wood fibers depending on aging condition, the type and pickup weight of chemicals and treatment method. When methyl cellulose was treated with impregnation or brushing, the aged paper was strengthened effectively. The strengthening effect by chemicals was dependent on the aged condition of the paper.

• Journal of the Korean Home Economics Association
• /
• v.11 no.3
• /
• pp.262-275
• /
• 1973

The aim of the present study is to explore the following two key questions on woman's attitude toward the clothing : (1) Their willingness to make their own dress at home : (2) purchasing tendencies of ready-made wear. The data were drawn through questionaires collected form 495 women in random sampling-335 housewives and 160 high school woman teachers living in Seoul. The findings are ; 1. As a whole there is no significant difference between the teachers and the housewives in their attitudes on clothing and home dressmaking. 2. Teachers and housewives alike have shown the tendency to avoid to take the trouble to make their own dresses themselves due, in large measure, to the technical difficulties of dressmarking. 3. On account of general shortcomings of ready-made clothing such as poor quality cloth, casual workmanship, inadequate assortment, unfitness of size to figure and outdated fashion, they purchase ready-made only for casual uses and really resort to tailor made for formal dresses. Since this paper is preliminary report, the accounts are to intend to be suggestive rather than conclusive, and more detailed and profound must, of course, await further empirical research.

• 보존과학연구
• /
• s.29
• /
• pp.45-64
• /
• 2008

'No-An-Dang' in 'Un-Hyeun palace' was using as a guesthouse by 'dea-won-goon' built in 1864. 'No-An-Dang tablet' exhibited in 'No-An-Dang' seems to be made by using the letters which were written by 'Choo-sa Kim Jeong-Hee'. This tablet was manufactured by special processes; wood frame which was made of a Korean white pine was drawn patterns by variety pigment and latticed inside are joined with 3 of horizontal square wooden sticks and 7 of vertical square wooden sticks, then several sheets of the paper mulberry put on this frame and sheets cut along the edge of letter attached lastly. This structure of tablet could cause more conservation problems than only made in wooden structures. Therefore, replica was made and exhibited in bad condition and original one kept in museum storage for effective conservation of artefacts.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.143-148
• /
• 2000

This paper describes how to make tailored blanks of front side member that were composed of high strength steel and TRIP(TRansformation Induced Plasticity) steel for weight reduction and improvement of crash load. Tailored blanks made by laser and mash-seam welding were compared with non-tailored blanks made by spot welding. Static compression tests were performed for performance comparison of each sample. Front side members made by tailored blank were superior to those made by spot welding in the initial, but those results were inverse in the last. Average load of tailored blank in six-angle type was better than that of rectangular type.