• 펄프종이기술
• /
• 제30권2호
• /
• pp.55-61
• /
• 1998

This treatment was applied to bleached softwood kraft pulp handsheets in an effort to improve physical strength of paper. Paper strength was improved by esterification of cellulose and polycarboxylic acid. Because hydrogen bond of carboxyl group is stronger than that of hydroxyl group, polycarboxylic acid forms stronger hydrogen bond than cellulose does. 1,2,3,4,-cyclopentanetetracarboxylic acid (CPTA) and sodium dihydrogen phosphate ($NaH_2O_4$) were used as polycarboxylic acid and catalyst, respectively This reaction was confirmed by the weight gain of the handsheets, by FTIR spectrum and by changes in mechanical properties of sheets. Wet tensile strength was improved when handsheets were treated with polycarboxylic acid. However, tear strength and burst strength decreased.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.69-75
• /
• 2014

Effects of alkali swelling of HwBKP (hardwood bleached kraft pulp) at a low concentration below 2 percent (based on the oven-dried weight of pulp) on handsheet properties were investigated. Swelling treatment of HwBKP was performed at various low NaOH concentrations with/without beating. Then, the changes in handsheet properties were evaluated in terms of bulk, optical and strength properties. It was found that bulk was slightly increased when the alkali concentration was increased. When the pulp was only swollen without beating, paper optical and strength properties was slightly decreased or not changed with alkali concentration. When the pulp was alkali-swollen after beating, paper strength and opacity showed almost no changes while brightness was increased. When the pulp was beaten after NaOH swelling, alkali concentration showed almost no effect on brightness and opacity of paper. Paper strength was slightly decreased with alkali concentration, suggesting that alkali pretreatment before refining could adversely affect refining efficiency.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.693-699
• /
• 2010

General transformer's life is known as paper insulation' life. If a transformer is degraded by these aging factors, it is known that electrical, mechanical and chemical characteristics for transformer's oil-paper are changed. When the kraft paper is aged, the cellulose polymer chains break down into shorter lengths. It causes decrease in both tensile strength and degree of polymerization of paper insulation. The paper breakdown is accompanied by an increase in the content of furanic compounds within the dielectric liquid. In this paper it is aimed at analysis on correlation between aging characteristics for insulating diagnosis of thermally aged paper. For investigating the accelerated aging process of oil-paper samples accelerating aging cell was manufactured for estimating variation of paper insulation during 500 hours at $140^{\circ}C$ temperature. To derive the results, it was performed analysis such as tensile strength(TS), depolymerization(DP), dielectric strength(DS), relative permittivity, water content(WC) and furan compound(FC) for aged paper. Also for analyzing correlation between insulating degradation characteristics, we used linear regression method. As as results of linear regression analysis, there was a close correlation between TS and DP. WC, FC. But dielectric strength was a weak correlation with aging time.

• 한국의류학회지
• /
• 제31권8호
• /
• pp.1286-1296
• /
• 2007

Hanji, the korean traditional papers were mostly made from mulberry paper. But the production and demand of hanji have decreased rapidly because mulberry paper yields were insufficient and handworked hanji procedures were complicated. Recently, the researches on hanji were carried out to improve the properties of hanji. Kenaf fibers have been interested as a substitute resource of mulberry paper for hanji production. In this research, Kenai pulps were manufactured with removal methods of lignin or hemicellulose from kenaf fibers and paper mulberry pulps with traditional alkali methods. Kenaf papers, paper mulberry, and kenaf/paper mulberry mixed papers were manufactured with their pulps. The crystallinity, fiber length, color of the pulps and tensile strength, tear strength, water absorption of the papers were investigated. The results were as follow: The removal rates of lignin of chemical retted kenaf fibers with sodium chlorite reaction for 40 minutes were 70% and were higher than 40% of double retted fibers. Paper mulberry pulps has less lignin and hemicellulose than kenaf differently. The crystallinity of paper mulberry pulps were very low with 60%, but kenaf pulps were 90%. The chemical retted CR-40-1 pulps were similar with paper mulberry pulps on fiber length & fibrilation of fibers. Tensile strength of paper mulberry were higher than kenaf papers because of fibrilation of paper mulberry, but tear strength were lower. Tensile strength and tear strength were improved on kenaf/paper mulberry 30/70 mixed papers.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.413-417
• /
• 1995

In order to elucidate the electrical and mechanical properties of insulating paper, it is desirable to study the performances of tensile strength, dielectric constant, dielectric strength. In this work, we constructed the characteristics depending on change of fabrication condition, and these specimens were manufactured by hot press method. As a result, tensile strength was about 75MPa and breakdown was above 5 kV/mm at the minimum value.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.46-53
• /
• 2015

Paper strengthening system of PVAm (polyvinylamine) has been used with strong negative charge polymer for electrostatic neutralization due to strong positive charge of PVAm. Recently, because of the controversy caused by the possibility of remaining PAM monomers in white water, a search for paper strength agent that can substitute for PAM was suggested. Therefore, this study was carried out to evaluate a dry strength polymer of PVAm. Starch and CMC were used as a substitute for PAM. The dual polymer system of PVAm and anionic charge control agent such as anionic starch or CMC (carboxy methyl cellulose) were found to be very effective as strength agent compared to the chemicals based on acrylamide.

• 한국의류학회지
• /
• 제46권4호
• /
• pp.565-582
• /
• 2022

In recent years, Jumchi-Hanji made of mulberry paper is used as a material for fashion items. This study examined the effect of the type of Choji method (Oebal-teugi or Ssangbal-teugi), layer number (one or two layers) and Jumchichigi time (20, 40, or 60 minutes) on the tensile, wet tensile, tearing and bursting strengths of Jumchi-Hanji. Jumchi-Hanjis used as test samples in this study were made from mulbery paper which was manufactured with either bleached or unbleached paper mulberry from Thailand. The results showed that Jumchi-Hanji made with two layers of mulberry papers had higher strength properties than Jumchi-Hanji made with only one layer. The strength properties of Jumchi-Hanji also increased with longer Jumchichigi time. Furthermore, this study confirmed that the effects of Jumchichigi time on Jumchi-Hanji strengths differed based on the type of Choji method, the layer number of mulberry papers used, and the specific strength property measured. Therefore, to guarantee the strength properties required by the application of Jumchi-Hanji paper as a fashion material, it is necessary to carefully consider the adequate Choji method and layer number to apply in the manufacture of Thai mulberry paper and the adequate duration time needed to perform Jumchichigi to Thai mulbery paper.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.697-703
• /
• 1996

Fatigue strength of high strengthsteels are variable with many different surface treatment. It is well known that residual compressive stress retard fatigue crack growth rate(or arrest crack). High strngth steels are manufactured by following process. Heat treatment, shot peening and chromium plating process. High strength steel(HRC40 or above) which are subjected to fatigue load and dynamic load, chromium plated parts shall be peened in accordance with requirements and baked after plating. The purpose of this paper is to compare and discuss the influence of surface treatment and hydrogen embrittlement on fatigue strength of high strength steel. Therefore, fatigue test was performed to investigate influence of surface treatment. The results shows that shot peening is very effect method in creasing fatigue life and after plating, baking process is essential to prevent hydogen failure. In this paper, the experimental investigation is made to clarify the influence of shot peening conditions and baking process on fatigue strength of high strength steel.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.63-72
• /
• 1998

This research was intended to evaluate the effect of carboxymethylcellulose(CMC) on the coating structure and surface strength of coated paper prepared with amphoteric latex based coating color. Printability and optical properties of coated papers were compared. The influence of the consolidation behavior of coating color on the coating structure and the surface strength of coated paper was investigated. Compared with the conventional anionic latex, amphoteric latex formed bulkyer, smoother and more porous coating layer, which in turn, restricted binder migration in the coating layers, and facilitated immobilization of coating colors. However, dry pick strength of coated paper was decreased. The addition of CMC to these systems had strongly influenced on. the consolidation behavior and porosity in the dry state, through forming the network structure of coating layers by the interaction with amphoteric latex particles. Thus, printability and optical properties of coated papers were improved. Results indicated that amphoteric latex could be practically applied to the paper coating to improve printability and optical properties of coated papers.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.315-326
• /
• 2009

PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.