• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.111-117
• /
• 2017

Stone powder sludge is a byproduct of the crushed aggregate industry, and most of it is dumped with soil in landfills. The disposal of stone powder sludge presents a major environmental problem. This paper investigates the effects of stone powder sludge on the fluidity, density, strength and micro-structure properties of AAC(autoclaved aerated concrete) samples. Stone powder sludge was obtained from a crushed aggregate factory in order to investigate its applicability as a substitute for quartz sand in AAC. To determine the properties of the AAC samples produced with stone powder sludge, specimens containing different foam ratios were produced. Flow value, density, compressive strength, tensile strength and flexural strength of the samples were tested, and X-ray diffraction (XRD) was performed. The test results indicated that the compressive strength of AAC specimens (F120) with stone powder sludge was higher than that of AAC specimens (Q120) with quartz sand for same foam ratio of 120%. For all XRD diagrams, a higher number of tobermorite peaks was shown for the F120 sample than for the Q120 sample, which may explain the slightly higher strength gain in the F120 sample.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.294-295
• /
• 2006

Varistor fabricated with ZnO nano-powder was studied about the characteristic of energy capability in this paper. ZnO nano-powder varistor were sintered in air at $1050\;^{\circ}C$. The electrical properties and residual voltage of ZnO nano-powder varistor were obtained. Our ZnO nano-powder varistor has about 3 times of electric field at varistor voltage as compared with commercial ZnO varistor fabricated with micro-powder. In the current impulse withstand test, our nano varistor has had better performance than micro varistor. To analysis energy capability take infrared images for pyrexia distribution of each varistor. ZnO Nano-powder varistor has shown much quick response property because of increasing effective cross-section.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.222-228
• /
• 2008

On living skin the chances of a successfully developing latent fingerprint are very limited. This is due to the fact that continual perspiration and rapid absorption diffuse into the lipophillic layer on skin. A study was conducted to investigate effectively developing method of latent fingerprints on human skin surfaces and pig skin likely corpse's skin. We used commercial fingerprint powder, black powders, black magnetic powder, fluorescence magnetic powder, Cyanoacrylate fuming (CA) and direct lifting methods (lifting paper, glasses and photo glossy paper). Developing of fresh fingerprints on living skin was achieved with S-powderblack, CA fuming and CA fuming following S-powder, fluorescence powder. The other powder tends to overwhelm the latent print and the background. But, latent fingerprint residue was disappeared with time after deposit on a living surface. In case of pig skin likely corpse's skin, latent fingerprint detection was achieved with CA fuming following S-powder and deposited print during 6 hr at $25^{\circ}C$, 40% relative moisture yielded excellent fingerprints with clear ridge details using 1 min CA fuming. And enhancement of fingerprint detection image using forensic light source was achieved.

• Environmental Engineering Research
• /
• v.21 no.4
• /
• pp.341-349
• /
• 2016

To improve the utilization rate of construction waste as mine backfilling materials, this paper investigated the feasibility of using recycled powder as mine paste backfilling cementitious material, and studied the pozzolanic activity of recycled construction waste powder. In this study, alkali-calcium-sulfur served as the activation principle and an orthogonal test plan was performed to analyze the impact of the early strength agent, quick lime, and gypsum on the pozzolanic activity of the recycled powder. Our results indicated that in descending order, early strength agent > quick lime > gypsum affected the strength of the backfilling paste with recycled powder as a cementitious material during early phases. The strength during late phases was affected by, in descending order, quick lime > gypsum > early strength agent. Using setting time and early compressive strength as an analysis index as well as an extreme difference analysis, it was found that the optimal ratio of recycled powder cementitious material for mine paste backfilling was recycled powder:quick lime:gypsum:early strength agent at 78%:10%:8%:4%. X-ray diffraction analysis and scanning electron microscope were used to show that the hydration products of recycled powder cementitious material at the initial stages were mainly CH and ettringite. As hydration time increased, more and more recycled powder was activated. It mainly became calcium silicate hydrate, calcium aluminate hydrate, etc. In summary, recycled powder exhibited potential pozzolanic activities. When activated, it could replace cementitious materials to be used in mine backfill.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.619-621
• /
• 2002

In this paper, AC reactor for PWM converter using the metal powder is introduced. Metal powder AC reactor was developed to substitute conventional iron core typed AC reactor in the PWM converter application. The characteristics of the metal powder AC reactor are analyzed and tested. A new reactor has reduced switching noise and loss.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.449-452
• /
• 2009

This paper was designed to fabricate the miniature spur gear with pitch circle of 1.8 by hot extrusion process of mechanically alloyed Zn-22wt%Al powder at various temperature. The mechanical alloying was preformed for ball milled times of 8h, 16h and 32h by the planetary ball milling. Mechanically alloyed powders were compacted cylindrical performs. Extrusions of the miniature spur gear using the alloyed powder were carried out at different extrusion temperatures. The extruded spur gear was sintered for 2h at $350^{\circ}C$ in argon atmosphere. The friction between the die and the powdered billet and the internally different density due to complex product shape cause the internal crack. To overcome the mentioned problems, high dimensional accuracy at cross section of the spur gear and uniform Vickers hardness could be obtained by graphite lubricant and controlling holding time.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.37-42
• /
• 2002

The purpose of this paper is comparing the forging effect according to the shape of preforms of cup shaped powder forging product, and extending the application of powder forging technology to more complicated cup-shaped products like pistons. In order to achieve this, preforms are provided by compacting, sintering, and machining to 5 different shapes, then forged to the final shape of products. The workability for sintered aluminium powder material was examined and confirmed its slope was 0.5 as known. Density and strain loci of forged products are also evaluated and compared. On the basis of the results, the most effective shape of preform was proposed. The preform for the piston which is 50mm in diameter was prepared and hot forged successfully to the final product.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1029-1032
• /
• 2001

The purpose of this paper is to establish an automated die design system for compacting and sizing process required in Powder Metallurgy. Though the Powder Metallurgy(P/M) is a practical and economical forming technology, it needs long time and many trials and errors for die design. Such a problem can be solved by introduction of the automated die design system for P/M. In order to establish the system, collecting, classifying, and systematizing related knowledges from the experts in industries, books, and papers were performed. The system was constructed by AutoLISP, the language operated in AutoCAD atmosphere. This language can efficiently support for user to work on drawings. There are three modules ; P/M part specification input module, P/M part design module, and Die design module. A part for vehicle was applied to the system and satisfied results were achieved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1280-1287
• /
• 2002

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than $100{\mu}$ m. This paper describes the performance of powder blasting technique in micro-line grooving of glass and the effect of the number of nozzle scanning on the depth and width of line groove. Experimental results showed that increasing the no. of nozzle scanning resulted in the increase of depth and width in grooves. Increase of width which may cause several problems in the precision machining results from wear of mask film. Therefore, well-controlled masking process is the most important factor for micro machining of glass with accuracy.