• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.4
• /
• pp.207-213
• /
• 2002

The paper introduces a switched reluctance motor drive system based on an 80C31 and an Intel 80C 196KB single-chip microprocessor control. Advance schemes are used in turn-on and turn-off angles with the power converter's main switches during traction and regenerative braking. The principles of traction speed control and braking torque control are given. The hardware and software patterns in the 80c31 and the Intel 80C196KB single-chip microprocessor control system are also presented.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.3
• /
• pp.129-133
• /
• 2004

As In DS/CDMA(direct sequence code division multiple access) system, the system capacity is limited by multiple access interference(MAI), and self-interference(SI) resulting from the multi-path propagation of the desired user signal. This paper, which the approximated analytic chip waveforms are nearly the same as the computer generated chip waveforms are shown. And then, the BER(Bit Error Rate) performances in CDMA system using the approximated analytic chip waveforms are shown.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.371-377
• /
• 2008

Our precedent study has reported glass-PDMS (polydimethylsiloxane) based biochip for the gene PCR (polymerase chain reaction). To prevent the contamination of bio sample, the once used biochip must not be used repeatedly. However, the fabrication cost of microheater and microsensor of the biochip was not cheap to use it as a disposable chip. This paper proposes new PCR-chip where the glass substrate integrated with the microheater and microsensor is detachable from the reaction chamber where the sample is injected. That makes it possible to reuse the glass substrate repeatedly. The performance of the proposed detachable PCR-chip was compared with that of the precedent monolithic PCR-chip. The results showed that the SRY (sex determining Y chromosome) gene PCR was successfully performed in the detachable chip compared with the monolithic chip. However, the more efforts to improve the efficiency of surface treatment of PDMS chip are needed to increase the possibility of applying the detachable chip to the detecting of male infertility.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.376-379
• /
• 2001

In this paper, I design the control chip that controls inner test sequence of Logic Tester to test chip. Logic tester has the thirteen inner instructions to control test sequence in test. And these instructions are saved in memory with test pattern data. Control chip generates address and control signal such as read, write signal of memory. Before testing, necessary data such as start address, end address, etc. are written to inner register of control chip. When test started, control chip receives the instruction in start address and executes, and generates address and control signals to access tester' inner memory. So whole test sequence is controlled by making the address and control signal in tester's inner memory. Control chip designs instruction's execution blocks, respectively. So if inner instruction is added from now on, a revision is easy. The control chip will be made using FPGA of Xilinx Co. in future.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.4
• /
• pp.330-336
• /
• 2014

The continuous chip generated in cutting process deteriorates workpiece, tool, and machine tool system. It is necessary to treat this continuous chip in ductile material machining condition for stable cutting. This paper deals with the chip control method using acoustic emission(AE) signal in pure copper turning operation. AE raw signals, root mean square(RMS) signals and wavelet transformed signals measured in turning process are introduced to analysis for chip patterns. With analysis of AE signals, it is obtained that the produced chip patterns are correlated with the specified AE signals which are transformed by fuzzy pattern algorithm. By this experimental investigation, the chip patterns can be classified at significant level in pure copper machining process and controlled from continuous chips to reduced-length stable chips.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.286-291
• /
• 2013

In this paper, in-line type flip chip bump 3D inspection equipment, using white light interferometer with large F.O.V., which is aimed to be used in flip chip bump test process is developed. Results of flip chip bump height measurement in many substrates and repeatability test results for the bumps in fixed location of each substrate are shown. Test results from test bench and those from developed flip chip bump 3D inspection equipment are compared and as a result repeatability is improved by reducing the impact of system vibration. A valuation basis for the testing quality of flip chip bump 3D inspection equipment is proposed.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.70-75
• /
• 1998

In this paper, the relationships between volumetric mixing ratio of rubber chip and physical and mechanical properties of wood/rubber composite panel was examined in order to investigate the mixture characteristics of wood and rubber chip. Because of the specific gravity of rubber differed from wood chip, physical properties of wood/rubber composite panel was shown very different values by mixing rate of chip element. Specific gravity in air-dry of composite panel was increased rapidly as volumetric percent of rubber chip was increased. Moisture content of composite panel was decreased as volumetric percent of rubber chip element was increased. This results was considered that wood weight is light and porosity material for moisture absorption. Compressive strength and modulus of rupture in bending test were decreased as volumetric percent of rubber chip increased. By mixing ratio control of chip elements, various wood/rubber composite panel can be applicable to every interior materials such as subfloor, playground, and exterior materials such as road blocks for recreational facilities in garden and forest and city parks.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.163-168
• /
• 2000

Once the chip has developed a mixed mode of side-curl and up-curl, it would generally curl to strike the tool flank. The development of the bending stresses and sheat in the chip would ultimately lead to chip failure. This paper approach this problem from a mechanics-based approach, by treating the chip as a 3-D elastic curved beam, and applying appropriate constraints and forces. The expressions for bending, shear and direct stresses are developed through an energy-based criterion. The location of the maximum stresses is also identified and explained for simulated test conditions.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.203-211
• /
• 1996

This paper describes CAD tools for the construction of image database in IC chip analysis CAD system. For IC chip analysis by high-resolution microscopy, the image database is essential to manage more than several thousand images. But manual database construction is error-prone and time-consuming. In order to solve this problem, we develop a set of CAD toos that include image grabber to capture chip images, image editor to make the whole chip image database from the grabbed images, and image divider to reconstruct the database that consists of evenly overlapped images for efficient region search. we also develop an interactive pattern matching method for user-friendly image editing, and a heuristic region search method for fast image division. The tools are developed with a high-performance graphic hardware with JPEG image comparession chip to process the huge color image data. The tools are under the field test and experimental resutls show that the database construction time can be redcued in 1/3 compared to manual database construction.

• The Magazine of the IEIE
• /
• v.29 no.3
• /
• pp.41-48
• /
• 2002

This paper presents a basic concept of lab-on-a-chip systems and their advantages in chemical and biological analyses. In addition, magnetic bead-based immunoassay on a microfluidic system is also presented as a typical example of lab-on-chip systems. Rapid and low volume immunoassays have been successfully achieved on the demonstrated lab-on-a-chip using magnetic beads, which are used as both immobilization surfaces and bio-molecule carriers. Total time required for an immunoassay was less than 20 minutes including sample incubation time, and sample volume wasted was less than $50{\mu}l$ during five repeated assays. Lab-on-a-chip is becoming a revolutionary tool for many different applications in chemical and biological analysis due to its fascinating advantages (fast and low cost) over conventional chemical or biological laboratories. Furthermore, simplicity of lab-on-a-chip systems will enable self-testing capability for patients or health consumers overcoming space limitation.