• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.224-229
• /
• 2001

This study was carried out to examine the quality stability of powdered soup using powder from oyster wash water (PSW). To compare the quality stability, powdered soup from oyster hot-water extracts (PSE) was also prepared by mixing hot-water extract powder (15 g), table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g), and onion powder (1.5 g). In preparing PSW, powder from oyster wash water, instead of powder from oyster hot-water extracts, was added and other additives were the same proportion as PSE. The PSW and PSE were packed with laminated film bag (OPP,$20\;{\mu}m$; PE, $20{\mu}m$; paper, $45\;g/m^3$; PE, $20\;{\mu}m$; Al, $7\;{\mu}m$; PE, $20\;{\mu}m$), and then stored at ambient temperature for 12 months. The moisture content, water activity, peroxide value, and fatty acid composition showed little changes during storage of the PSW, The pH, volatile basic nitrogen content, and brown pigment formation increased slightly, while white index decreased slightly during storage of PSW. No significant difference was observed in the changes of food components between PSW and PSE during storage. According to a sensory evaluation, the change in quality of PSW was negligible during 12 months of storage. From the results of the chemical experiment and sensory evaluation, PSW packed with laminated film bag (OPP, $20\;{\mu}m$; PE, $20\;{\mu}m$; paper, $45\;g/{\mu}m$; PE, $20\;{\mu}m$) was revealed to be preserved in good quality during 12 months of storage.

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.231-239
• /
• 2016

To study the transcript levels of epigenetically regulated genes in tobacco, we have developed a transgenic line OX1 overexpressing NtROS2a gene encoding cytosine DNA demethylation and a RNAi plant line RNAi13. It has been reported that salt- and $H_2O_2$-stress tolerance of these transgenic lines are enhanced with various phenotypic characters (Lee et al. 2015). In this paper, we conducted microarray analysis with Agilent Tobacco 4 x 44K oligo chip by using overexpression line OX1, RNAi plant line RNAi 13, and wild type plant WT. Differentially expressed genes (DEGs) related to metabolism, nutrient supply, and various stressed were up-regulated by approximately 1.5- to 80- fold. DEGs related to co-enzymes, metabolism, and methylation functional genes were down-regulated by approximately 0.03- to 0.7- fold. qRT-PCR analysis showed that the transcript levels of several candidate genes in OX1 and RNAi lines were significantly (p < 0.05) higher than those in WT, such as genes encoding KH domain-containing protein, MADS-box protein, and Zinc phosphodiesterase ELAC protein. On the other hand, several genes such as those encoding pentatricopeptide (PPR) repeat-containing protein, histone deacetylase HDAC3 protein, and protein kinase were decreased by approximately 0.4- to 1.0- fold. This study showed that NtROS2a gene encoding DNA glycosylase related to demethylation could regulate adaptive response of tobacco at transcriptional level.

• Journal of the Korean association of regional geographers
• /
• v.13 no.2
• /
• pp.156-170
• /
• 2007

The commerce and industry of Busan was developed because of good geographical conditions with harbor. After passing its settling-down and diffusing time, Busan has grown in the trade city. Busan has lost the competitive power of the port city since 2000, because of the weakness of its economic power which is caused by the secession of manufacturing industry and the decrease of resident population and foreign tourist. In order to overcome these weaknesses, it is necessary for Busan to take the innovative strategy for the activation of marine tourism. This goal can be achieved by the strong quality of the port city, the coastal terrain, the traditional industry and the international traffic. The aim of this paper is to explore the Innovative Strategy for the activation of marine tourism in Busan and to suggest the following proposal. First, the government must decide the base of marine tourism under the geography viewpoint of the coast and sea, and develope tourism resources after analyzing the identity of marine tourism base. Second, the core part along the selected bases of marine tourism must be constructed the tourism terminal as the landmark of Busan in order to concentrate foreign tourist. Third, after each base of marine tourism must become the resort for tourists, they are able to experience the activity of marine tourism in this resort. Therefore, each base must be specialized. Fourth, each base must be connected with the route of marine tourism Fifth, in order to overcome the off-season of marine tourism, winter tourism goods such as skates, skis, artificial sea-bathing pool, artificial swimming beach, artificial sled, artificial rock wall of coast, hot spring resort of salt water are required to be developed in the center of marine tourism base.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.45-65
• /
• 2022

In this paper, a diaphragm wall that supports soils and rock was modeled using FLAC, a finite difference analysis program, to evaluate the seismic behavior of temporary retaining structures in a deep excavation. The appropriateness of the numerical model was verified by comparing its results with those of the centrifuge test performed in a similar condition. The bending moment distribution along the diaphragm wall shows a very similar tendency, and the maximum acceleration obtained at the backfill and top of the wall shows a difference within 5%. Based on the developed model, a parametric study was conducted in various input earthquake, ground, and excavation conditions. The maximum structural forces and bending moment under earthquake loading were compared with the maximum values during excavation, from which the critical condition that requires a seismic design was roughly sorted out. The maximum bending moment of a wall that retains soil layers increased 17%. Particularly, the axial force of struts located in loose soils increased 32% under 100 years return period of an earthquake event, which strongly is estimated to require seismic design for structural safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.28-36
• /
• 2018

Islands are supplied with power from diesel generation or from photovoltaic power generation, and problems with offshore environmental impacts (age deterioration, salt pollution), environmental pollution (exhaust gas, noise, dust) and power generation costs (installation, maintenance) have increasingly emerged. In 2016, the cost recovery rate was only 27%, and deficits reached 73% on 65 islands managed by KEPCO. In terms of deficits, the costs incurred in the power generation sector accounted for 91%, with the ratio of fixed costs at about 60%. Analysis suggests that operating costs can be reduced with an optimal power supply system that improves power generation efficiency and makes operating systems more efficient. Therefore, it is possible to simplify fuel transportation and facility maintenance, because one island integrates the power plants of remote islands, and offshore cable is used to supply power to the other islands. From the economic evaluations in this paper, an algorithm deciding offshore cable layout validity for an integrated power supply between adjacent islands is presented. Simulation results based on the proposed algorithm confirmed that an integrated power supply is economical for existing stand-alone operations on islands having diesel generation, low peak power, and near distances.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.127-131
• /
• 2011

In this paper, we study the electronic and magnetic properties of Cr substituted SiTe in the rock-salt structure compound using the full potential linearized augmented plane wave method within the generalized gradient approximation to the exchange correlation potential. Two stoichiometries are studied: $CrSi_3Te_4$ with 25 %, and $CrSiTe_2$ with 50 % Cr substitution. We found, from the total energy calculations, that the equilibrium lattice constant for cubic $CrSi_3Te_4$ is 11.64 a.u. and a = 7.89 a.u. and c = 11.13 a.u. for tetragonal $CrSiTe_2$. The integer value of the calculated magnetic moment per unit cell, $4{\mu}_B$ for $CrSiTe_2$ suggests that this compound is halfmetallic. The magnetic moment per unit cell for $CrSi_3Te_4$ is slightly larger than $4{\mu}_B$. The magnetic moment on Cr atoms are 3.61 and $3.62{\mu}_B$ in the $CrSi_3Te_4$ and $CrSiTe_2$, respectively. The presence of Cr atoms causes that the other atoms become slightly magnetized in both compounds. The electronic properties and the magnetism are discussed with the calculated spin-polarized density of states.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.187-201
• /
• 2005

Bioprocessing technologies utilizing 'biorecognition' between a solid matrix and a protein is being widely experimented as a means to replacing the conventional, solution-based technology. Frequently the matrices are chromatographic resins with specific functional groups exposed outside. Since the reactions of and interactions with the proteins occur as they are attached to the solid matrix, this 'solid-phase' processing has distinct advantages over the solution-phase technology. Solid-phase refolding of inclusion body proteins uses ion exchange resins to adsorb denaturant-dissolved inclusion body. As the denaturant is slowly removed from the micromoiety around the protein, it is refolded into a native, three-dimensional structure. Once the refolding is complete, the folded protein can be eluted by a conventional elution technique such as the salt-gradient. This concept was successfully extended to 'EBA (expanded bed adsorption)-mediated refolding,' in which the denaturant-dissolved inclusion body in whole cell homogenate is adsorbed to a Streamline resin while cell debris and other impurity proteins are removed by the EBA action. The adsorbed protein follows the same refolding steps. This solid-phase refolding process shows the potential to improve the refolding yield, reduce the number of processing steps and the processing volume and time, and thus improve the overall process economics significantly. In this paper, the experimental results of the solid-phase refolding technology applied to several biopharmaceutical proteins of various types are presented.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.8-15
• /
• 2002

In this paper we dealt with processing of sausage using duck mechanically deboned meat(duck-MDM). The results may be summarized as follows : 1) after semi-thawing of freezing duck-MDM at $25^{\circ}C$ for 3 hours and cutting as thin, 2) alkali washing at low temperature for 4 hours by 0.2% NaHCO$_3$and 0.15% NaCl, 3) curing at low temperature for 4 hours, 4) after washing and dehydrating(moisture 80%), 5) grinding at low temperature for 55 minutes by silent cutter such as 1st grinding for 10 minutes added only dehydrated meat, 2rd grinding for 30 minutes added salt in 1st grinded meat and 3rd grinding for 15 minutes added other additives, 6) after quick casing in PVDC film and heating at 9$0^{\circ}C$ for 80 minutes, 7) cooling to below room temperature. The additives added at 3rd grinding process were Polymix-CA(0.3%), Polymix-CS(0.3%), polyphosphate(0.3%), sugar(4.2%), potato starch(8.0%), pyre-phosphates(0.3%), isolated soy protein(7.0%), MSG(0.2%), onion powder(0.5%), garlic powder(0.1%), nutmeg (1.5%), potassium sorbate(<0.1%), food red no.40(0.0075%), egg albumin(7.0%) and gluten(3.0%).

• The Korean Journal of Mycology
• /
• v.50 no.3
• /
• pp.217-224
• /
• 2022

This study aimed to isolated wild yeasts from freshwater in Korea. The strains were identified by using the D1/D2 domains of the 26S rDNA regions. Consequently, six strains were named as Apiotrichum chiropterorum (NNIBRFG36995), A. domesticum (NNIBRFG32938), A. dulcitum (NNIBRFG33144), A. laibachii (NNIBRFG36991), Saprochaete quercus (NNIBRFG33183) and Tausonia pullulans (NNIBRFG33181). These yeasts have not previously been recorded in Korea, this paper is the first report. We were investigated to the morphological and cultural characteristics of these yeasts. All the strains grew well on Yeast extract peptone dextrose (YPD), Potato dextrose (PD), and Yeast mold (YM) media and in temperature range of 15-30℃. A. domesticum (NNIBRFG32938), A. laibachii (NNIBRFG36991) and T. pullulans (NNIBRFG33181) grew even in 20% glucose containing YPD medium, so they had glucose tolerance. A. domesticum (NNIBRFG32938) and A. laibachii (NNIBRFG36991) had salt resistance as growing even in 5% NaCl containing YPD medium.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.655-660
• /
• 2018

Internal combustion generation (ICG) is used to supply power to islands due to geographical characteristics, but there are some problems, such as considerable operating cost, salt pollution, and environmental pollution. For these islands, KEPCO pays a significant amount of operating deficit each year, especially for the fuel and servicing costs, which account for a large portion of this deficit. Integrated ICG (IICG) through an offshore cable between near islands is being considered to decrease servicing costs. Distributed generation (DG) is also being introduced on the islands because of the demand for a low-carbon society. In hybrid internal combustion generation (HICG), DG is introduced into IICG, which can be applied because the DG output is insufficient due to environmental characteristics, and the IICG is used as an auxiliary power source. Therefore, this paper proposes an algorithm to estimate the optimal DG capacity that can be introduced in accordance with the KEPCO operating deficit in the HICG. According to simulations, the optimal DG capacity depends on the fuel cost and load capacity. The validity of the proposed algorithm was confirmed for multiple islands with different peak loads.