• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1726-1734
• /
• 1998

This paper focuses on the unsteady close-contact melting phenomenon occurring between a phase change material kept at its melting temperature and a flat surface on which constant heat flux is imposed. Based on the same simplifications and framework of analysis as the case of constant surface temperature, an approximate analytical solution which depends only on the liquid-to-solid density ratio is successfully derived. In order to keep consistency with the known solution procedure, both the dimensionless wall heat flux and the Stefan number are properly redefined. The obtained solution proves to agree quite well with the published numerical data and to be capable of resolving the fundamental features of unsteady close-contact melting, especially in the presence of the solid-liquid density difference. The density ratio directly affects the film growth rate and the initial value of solid descending velocity, thereby controlling the duration of unsteady process. The effects of other parameters can be evaluated readily from the steady solution which is implied in the normalized result. Since the dimensionless surface temperature for the present boundary condition increases from zero to unity along the evolution path of the liquid film thickness, the unsteady process lasts longer than that for the case of isothermal heating.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.653-658
• /
• 2008

The automotive environment is particularly demanding on connector performance, and is characterized by large temperature changes, high humidity and corrosive atmospheres. Fretting is a contact damage process that occurs between two contact surfaces. Fretting corrosion refers to corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects arc suggested.

• Steel and Composite Structures
• /
• v.10 no.4
• /
• pp.297-315
• /
• 2010

This paper is concerned with free vibration characteristics and natural frequency of horizontally curved composite plate girder bridges. Three-dimensional finite element models are developed for the girders using the software package LUSAS and analyses carried out on the models. The validity of the finite element models is first established through comparison with the corresponding results published by other researchers. Studies are then carried out to investigate the effects of total number of girders, number of cross-frames and curvature on the free vibration response of horizontally curved composite plate girder bridges. The results confirm the fact that bending modes are always coupled with torsional modes for horizontally curved bridge girder systems. The results show that the first bending mode is influenced by composite action between the concrete deck and steel beam at low subtended angle but, on the girders with larger subtended angle at the centre of curvature such influence is non-existence. The increase in the number of girders results in higher natural frequency but at a decreasing rate. The in-plane modes viz. longitudinal and arching modes are significantly influenced by composite action and number of girders. If no composite action is taken into account the number of girders has no significant effect for the in-plane modes.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.3
• /
• pp.209-221
• /
• 2016

As the ICT is an industry which is the basis of the technology convergence, it is the driving force of development for new business opportunities and existing industries. But, most of the existing studies for ICT convergence have identified the trend for convergence in technological terms. So, it is difficult to identify the convergence trend in the subject innovation perspective which leads the innovation activities In the ICT industry. The newly entered companies in the ICT industry are key indicators to identify the convergence trend. They have two specific characteristics that show the wide range of the convergence technology and the application rate of the convergence. Because previous studies did not take into account these two characteristics of the newly entered companies, so it is hard to analyze the exact convergence trend. Therefore, in this paper, we classify the patents for the ICT industry depending on the subject innovation. Then, we deduct the core convergence technology in the ICT industries and application area of the non-ICT industries.

• Journal of Information Science Theory and Practice
• /
• v.3 no.1
• /
• pp.66-76
• /
• 2015

This research uses a new approach to analyze the extent of influence journal papers have on the progress of varied research fields by estimation of subject-based influence on research other than impact factor that relies on citation index. It is initiated with the hypothesis that earlier established citation relations between journal and citing paper, which reveals the research field that contains the highest citation index and hence has received the greatest contribution from a particular journal, would have inconsistent contribution to the research field over the year of journal publication. The target research is primarily 128 journal papers and 4,123 citing papers from Information Systems Research published in the years 2001, 2004, 2007, and 2010. The characteristics of citation history and hallmarks of research field of citing papers were studied and analysis on significant distinction between citing fields based on the year of publication was performed. The analysis results show the order of citation rate to be highest from Computer Science (2,221 cases), Business & Economics (2,191 cases), and Information Science & Library Science (1,901 cases). The citation history of the journal, nonetheless, indicates increase in citation during 2-3 years after the earliest publication till it achieves constant citation. The statistical analysis shows significant variation in citing fields in accordance with the publication year; especially in 2010, journal contribution has increased in the fields of Business & Economics, Operations Research & Management Science, and Health Care Sciences & Services but, however, is reduced in Education & Educational Research and Social Sciences - Other Topics.

• Advances in concrete construction
• /
• v.15 no.1
• /
• pp.63-74
• /
• 2023

All production and consumption activities produce wastes, which often cause damage to our environment and multiple risks to the human health. The valorization of these wastes in concrete technology is a future solution that will allow finding other construction materials sources, optimizing energy consumption and protecting the environment. Among these wastes, there is the marble waste. Every year, huge amount of marble waste is discarded as dust or aggregates form, in open-air storage areas causing serious problems for the environment and public health. In this context, the incorporation of marble waste as a replacement of ordinary aggregates or cement in concrete composition is actively investigated by researchers. This paper presents a comprehensive review of published studies over the last 20 years, dealing the effect of marble waste on fresh and hardened properties of concrete. Most of the studies carried out have used marble waste as dust with substitution rates between 5 and 20%. Besides the economic and ecological benefits, this review showed that marble waste can improve the physical, mechanical and durability properties of concrete. This improvement depends on the form (dust, fine aggregate or coarse aggregate), substitution method (as cement or aggregates replacement) and substitution rate of marble waste. Additionally, the review results showed that the use of 10-15% of marble waste dust as cement substitution can lead to increase the compressive strength.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.262-269
• /
• 2019

References at the end of an academic paper are information that helps authors keep their research ethics, readers refer to related prior studies. Also references are useful information for linking citations and citations between articles. As bibliography metrics develops, bibliographic data is used as an important data for assessing the academic influence of countries, institutions and individual researchers. However, it is not easy to identify and link the reference data due to the diversity of the bibliographic citation formats, the loss of information due to the abbreviation of journal names and author names, and typos by authors. This study investigated the method of improving the bibliographic data mapping rate by analyzing the unmapped cases. As a result, it was found that the main cause of the article-reference mapping failure was the similarity of abbreviated journal names. Research team suggested that continuous management of journal title authority data and improving the DOI registration rate as ways to improve the identification and mapping rate. This study is differentiated from other studies in used database. Bibliography mapping was attempted for domestic and foreign integrated journal database that is mainly subscribed, used, published and cited in Korea. Through reference construction volume and mapping rate improvement, it can be used as citation analysis and service database reflecting domestic situation that is different from overseas citation index database.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.309-316
• /
• 2006

$\underline{Purpose}$: To analyze the recent citation trend and to find a way to improve impact factor (IF) of the Journal of Korean Therapeutic Radiology and Oncology (JKSTRO) by analysis of Korean Medical Citation Index (KoMCI) citation data of JKSTRO and comparison with that of mean citation data of all journals enlisted on KoMCI (KoMCI journals) during 2000-2005. $\underline{Materials\;and\;Methods}$: All citation data of entire journals enlisted on KoMCI and JKSTRO from 2000 to 2005 were obtained from KoMCI. The trend of total and annual number of published articles and reference citations, total citations and self-citations per paper, IF and impact factor excluding self-citations (ZIF) were described and compared on both KoMCI journals and JKSTRO. $\underline{Results}$: Annual number of published articles was decreased for 6 years on both KoMCI journals and JKSTRO (32% and 38% reduction rate). The number of Korean journal references per article is 1.6 papers on JKSTRO comparing to 2.0 papers on KoMCI journals. The percentage of Korean references/total references increased from 5.0% in 2000 to 7.7% in 2005 on JKSTRO and from 8.5% in 2000 to 10.1% on KoMCI journals. The number of total citations received/paper on JKSTRO (average 1.333) is smaller than that of KoMCI journals (average 1.694), there was an increased rate of 67% in 2005 comparing to 2000. The percentage of self-citations/total citations (average 72%) on JKSTRO is slightly higher than that of KoMCI journals (average 61%). IF of JKSTRO was gradually improved and 0.144, 0.125, 0.088, 0.107, 0.187, and 0.203 in 2000-2005 respectively. However, ZIF of JKSTRO is steadily decreased from 0.038 in 2000 to 0.013 in 2005 except 0.044 in 2004. $\underline{Conclusion}$: IF of JKSTRO was slightly improved but had some innate problem of smaller number of citations received. To make JKSTRO as a highly cited journal, the awareness of academic status of JKSTRO and active participation of every member of JKSTRO including encouraging self-citations of papers published recent 2 years and submission of English written papers, and active academic cooperation with related academic societies.

• Structural Engineering and Mechanics
• /
• v.30 no.6
• /
• pp.713-732
• /
• 2008

Serviceability and durability of the concrete members can be seriously affected by the corrosion of steel rebar. Carbonation front and or chloride ingress can destroy the passive film on rebar and may set the corrosion (oxidation process). Depending on the level of oxidation (expansive corrosion products/rust) damage to the cover concrete takes place in the form of expansion, cracking and spalling or delamination. This makes the concrete unable to develop forces through bond and also become unprotected against further degradation from corrosion; and thus marks the end of service life for corrosion-affected structures. This paper presents an analytical model that predicts the weight loss of steel rebar and the corresponding time from onset of corrosion for the known corrosion rate and thus can be used for the determination of time to cover cracking in corrosion affected RC member. This model uses fully the thick-walled cylinder approach. The gradual crack propagation in radial directions (from inside) is considered when the circumferential tensile stresses at the inner surface of intact concrete have reached the tensile strength of concrete. The analysis is done separately with and without considering the stiffness of reinforcing steel and rust combine along with the assumption of zero residual strength of cracked concrete. The model accounts for the time required for corrosion products to fill a porous zone before they start inducing expansive pressure on the concrete surrounding the steel rebar. The capability of the model to produce the experimental trends is demonstrated by comparing the model's predictions with the results of experimental data published in the literature. The effect of considering the corroded reinforcing steel bar stiffness is demonstrated. A sensitivity analysis has also been carried out to show the influence of the various parameters. It has been found that material properties and their inter-relations significantly influence weight loss of rebar. Time to cover cracking from onset of corrosion for the same weight loss is influenced by corrosion rate and state of oxidation of corrosion product formed. Time to cover cracking from onset of corrosion is useful in making certain decisions pertaining to inspection, repair, rehabilitation, replacement and demolition of RC member/structure in corrosive environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.843-851
• /
• 2015

Among various ammonium salts and metal ammine chlorides used as solid materials for the sources of ammonia with solid SCR for lean NOx reduction, magnesium ammine chloride was taken up for study in this paper because of its ease of handling and safety. Lab-scale synthetic method of magnesium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%). To understand material characteristics for lab-made magnesium ammine chloride, DA, IC, FT-IR, XRD and SDT analyses were performed using the published data available in literature. From the analytical results, the water content in the lab-made magnesium ammine chloride can be determined. A new test procedure for water removal was proposed, by which the adsorption rate of lab-made sample was found to be approximately 100%.