• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.147-152
• /
• 2015

The compensation characteristics of WDM channels depending on residual dispersion per spans (RDPS) deviation in optical links with the randomly distributed RDPS for the adaptive configuration are investigated in this paper. Also, the link design rule related with RDPS deviations is proposed, from the viewpoint of the allowable net residual dispersion (NRD). It is confirmed that the effect of compensation for the distorted WDM channels is more increased as RDPS deviation is smaller. Also, it is confirmed that the decrease of the allowable NRD range for the exact eye opening penalty (EOP) is proportional to RDPS deviation. Therefore, the results of this research is expected to be the design reference for the flexible link configuration of long-haul optical transmission links.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.255-260
• /
• 2023

In order to spread LED lighting, LED lighting technology directly driven by alternating current (AC) commercial power has recently been introduced. Since current does not flow at a voltage lower than the threshold voltage of the LED, a non-conductive section occurs in the current waveform, and the higher the threshold voltage of the LED, the more discontinuous current waveforms are generated. In this paper, multi-LED modules are connected in series so that the threshold voltage can be adjusted according to the number of LED modules. A small number of LED modules are driven at a low instantaneous rectified voltage, and a large number of LED modules are driven at a high instantaneous rectified voltage to lengthen the overall lighting time of AC-LED lighting, thereby minimizing the luminance deviation of AC-LED lighting. In addition, the load current flowing through the LED module is adjusted to be the same as the design current even at the maximum rectified voltage higher than the design voltage, so that the light brightness of the LED module is kept constant. Therefore, even if the rectified voltage applied to the LED module changes, the AC-LED lighting in which the light brightness is constant and the luminance deviation is minimal has been realized.

• The Journal of Korean Philosophical History
• /
• no.27
• /
• pp.417-446
• /
• 2009

This study was to review the features of the preventive dimension in connection with adolescent deviation on the basis of the morality and ethics held by Confucian doctrine. To find solutions to the problems of adolescent deviation is never easy. As adolescent deviation always does occur, it is important to consider the methods that can minimize and prevent it. The traditional society of Korea laid weight on the education and training in the aspect of preventive measure against such adolescent deviation by emphasizing moral edification and realization of spiritual understanding for it. In this paper, the researcher tried to understand the problem situations by examining the image of such deviation and its type as well as the method on response thereto targeting the young generation of Korea. In addition, the researcher analyzed how the adolescent was recognized in the traditional society that was established on the Confucian values, and moral standards that applied to them, and the process of education as well. Through the moral concepts of Confucianism that were revealed in the Doctrine of the Mean (中庸, pronounced 'Jungyong' in Korean) in particular, the researcher sought the possibility of education on morality and ethics that will be able to prevent adolescent deviation. This study suggests that the morality and ethics held by Confucian doctrine can prevent adolescent deviation and open a new horizon of ethics education.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.835-840
• /
• 2014

In this paper, we analyze the visual deviation for the sight mismatch between the digital broadcast camera during shooting and panelists due to sideways frequently the digital stopwatch for panelists who participated in the election broadcast to check the time limit. Match the sight of the on-air broadcast camera discussion and participants in the debate, such as the small studio is relatively stable. However, if a large number of participants in the discussion and broadcasting of the forum is a serious sight deviation occurring by sideways large LCD monitor stopwatch that is installed in the center. Therefore, in this paper, the number of panelists, the length of the desk, to discuss the analysis of fair value changes in accordance with the height and distance the distance between the digital stopwatch, and digital broadcast camera.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.5
• /
• pp.413-419
• /
• 2008

Deterministic design optimization (DO) does not explicitly deal with a variety of factors from inherent randomness and uncertainties. Reliability based design optimization(RBDO) is necessary to use in engineering systems in order to guarantee quality and performance of product. In this paper, design variables are considered as random variables. Standard deviation according to change of design variables have changed as much as coefficient of variation. And, if the standard deviation is error of manufacturing, standard deviation-mean relation is concave form. We obtain reliability index using advanced first order second moment method(AFOSM). This paper is examined by solving two examples and the results are compares with DO, RBDO and suggested RBDO.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.1
• /
• pp.7-13
• /
• 2008

This paper proposes a newly structured circuit that can compensate current deviation of a data driver circuit for OLED. A conventional data drivel circuit for OLED cannot compensate the current deviation at the data drivel circuit output terminal generated by MOS process change, but the proposed data drivel circuit can authorize uniform value of current to an OLED panel by calibrating the current deviation at the output terminal. The proposed circuit can minimize current deviation of the output current via process change by connecting the circuit for data output current with a common interconnect line through addition of a switching transistor to the existing data output circuit. The circuit proposed in this paper has been designed based on an OLED panel supporting $128{\times}128$ resolution, and the process used for driver circuit development is 0.35um. As a result of the experiment in this study, the output current of the data driver circuit proposed here has 1% range of error, while 9% range of severe changes was demonstrated in the case of the previous data driver circuit. When using the data driver circuit for OLED proposed in this paper, high definition OLED display can be actualized and the circuit can be applied to mobile display devices requiring high quality display features.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.960-967
• /
• 2012

Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.57-62
• /
• 2012

In this paper, numerical analysis by finite element method, parameter design by the Taguchi method and ANOVA method were used to analyze about effect of design deviations and thickness variations on warpage of FCCSP substrate. Based on the computed results, it was known that core material in substrate was the most determining deviation for reducing warpage. Solder resist, prepreg and circuit layer were insignificant effect on warpage relatively. But these results meant not thickness effect was little importance but mechanical properties of core material were very effective. Warpage decreased as Solder resist and circuit layer thickness decreased but effect of prepreg thickness was conversely. Also, these results showed substrate warpage would be increased to maximum 40% as thickness deviation combination. It meant warpage was affected by thickness tolerance under manufacturing process even if it were met quality requirements. Threfore, it was strongly recommended that substrate thickness deviation should be optimized and controlled precisely to reduce warpage in manufacturing process.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.11-24
• /
• 2009

The process controller in the adjustment procedure is often used effectively to control the process level close to target when noise is present and unremovable. Examples of the robust controller are single EWMA controller and double EWMA controller. Double EWMA controller is designed to reduce the offset of the process deviation, which single EWMA can not eliminate. In this paper, the two controllers are modified by taking EWMA of the original controller to reduce the adjustment variance, which may become excessively large when the two given controllers are implemented. It is shown that the EWMA modification of the given controllers is successful in reducing the adjustment variance, while the mean squared deviation increases slightly.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.6
• /
• pp.103-111
• /
• 2005

This paper presents a novel automated threshold-decision algorithm that uses the mean and standard-deviation values obtained from the difference values of consecutive frames. At first, the calculation of difference values is obtained by the weighted ${\chi}^2$-test algorithm which was modified by joining color histogram to ${\chi}^2$-test algorithm. The weighted ${\chi}^2$-test algorithm can subdivide the difference values by imposing weights according to NTSC standard. In the first step, the proposed automatic threshold-decision algorithm calculates the mean and standard-deviation value from the total difference values, and then subtracts the mean value from the each difference values. In the next step, the same process is performed on the remained difference values, and lastly, the threshold is detected from the mean when the standard deviation has a maximum value. The proposed method is tested on various video sources and, in the experimental results, it is shown that the proposed method efficiently estimates the thresholds and reliably detects scene changes.