• Korean journal of applied entomology
• /
• v.49 no.3
• /
• pp.219-226
• /
• 2010

This paper presents the occurrence and damage characteristics of the rice leaf-folder populations in the paddy fields of Dangsu-dong, Suwon from 2004 to 2007, and also reports the insecticide response of rice leaf-folder populations, which were collected from 2005 to 2006 in Korea and Vietnam. Laboratory measurements of the head capsule width and body length data enabled the identification of the rice leaf-folder larva stages collected in the field. The rice leaf-folder population in Suwon from 2004 to 2007 has a clear pattern consisting of two different group: the low and high density years. During the low density years (2004 and 2006), only one adult peak was noted in late August, with the damaged-hill percent less than 10% in late July, and the damaged-leaf percent around 2% in September. In contrast, during the high density years (2005 and 2007), two adult peaks were noted in early August and mid-September, with the damaged-hill percent was around 30% in late July, and the damaged-leaf percent 15 to 30% in September, which was beyond the economic injury level of rice leaf-folder. High correlations existed between the occurrence of rice leaf-folder in late July and early August and damages to rice during September. Based on these results, we suggest that the information on the rice leaf-folder population monitored by the adult density or damaged-hill percent in late July and early August would be very useful for predicting the damages later in the season for aiding in decision-making for timely control. In addition, the regional populations of rice leaf-folder showed the similar responses to the insecticides tested: high susceptibility to IGRs (tebufenozide and methoxyfenozide) and organophosphates (chlorpyrifos-methyl, pyridaphenthion), but relatively low to cartap.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.581-594
• /
• 2004

CREAHS II carried out an intensive hydrographic survey covering almost entire East Sea in 1999. Hydrographic data from total 203 stations were released to public on the internee. This paper summarized the results of water mass analysis by OHP (Optimum Multiparameter) method that utilizes temperature, salinity, dissolved oxygen, pH, alkalinity, silicate, nitrate, phosphate and location data as an input data-matrix. A total of eight source water types are identified in the East Sea: four in surface waters(North Korea Surface Water, Tatar Surface Cold Water, East Korean Coastal Water, Modified Tsushima Surface Water), two intermediate water types (Tsushima Middle Water, Liman Cold Water), two deep water types (East Sea Intermediate Water, East Sea Proper Water). Of these NKSW, MTSW and TSCW are the newly reported as the source water type. Distribution of each water types reveals several few interesting hydrographic features. A few noteworthy are summarized as follows: The Tsushima Warm Current enter the East Sea as three branches; East Korea Coastal Water propagates north along the coast around $38^{\circ}N$ then turns to northeastward to $42^{\circ}N$ and moves eastward. Cold waters of northern origin move southward along the coast at the subsurface, which existence the existence of a circulation cell at the intermediate depth of the East Sea. The estimated volume of each water types inferred from the OMP results show that the deep waters (ESIW + ESPW) fill up ca. 90% of the East Sea basins. Consequently the formation and circulation of deep waters are the key factors controlling environmental condition of the East Sea.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.213-254
• /
• 1996

The Korean Geographical Society was founded in 1945, when Korea was liberated from the Japanese rule. And The Journal of the Korean Geography activated academic studies of geography by publishing research papers in it. Professor Kang, Dae-Hyun wrote the first two specialized papers of rural geography in 1966: " Flood Plain Settlements on the Han River" and "The Location and Form of the Dispersed Villages around Dae-Cwan-Ryung". The early studies of rural geography were not based on serious academic foundations, such as the adjustment of theoretical notions and a good grasp of subjects. After choosing subjects that came to hand without academic consideration. they simply enumerated generalized items of the results of the field work investigation such as the location the landscape and the process of formation of the settlements. In the 1970s and 1980s, however, rural settlement studies progressed remarkably in Korea. More than 80% of 318 dissertations, theses, or papers collected for this review were written in the late 1980s, and the subjects and methodology became diversified. As may be expected, recent studies are found very systematic and problem-solving in the various fields - contexual understanding spatial structure, the development of clan villages according to the socialization process, the effects of rural-out migration on the change of villages etc. Such a trend can be understood as a reaction to the circumstances under which, as the Western society already experienced, rural villages become washed out by the waves of industralization and urbanization and hardly continue to exist. In this paper, geographical studies of rural settlement which have been carried out in Korea last fifty years will be reviewed under the four headings on the studies related to a) farming villages; b) fishing villages; c) mountain villages: and d) special function villages. Studies of farming villages and related ones are very diverse. The results of the studies carried out last fifty years can be classified into sixteen subjects. Just as, in the West, studies of rural settlement have been mainly concerned with farming villages since rural geography came into being, so, in Korea, they have been centred on farming villages. It is a natural result considering the history of human life. Even in Korea, however the rural settlement is no more an isolated life space which keeps unique traditions of old life style, but it begins to form a dynamic life space connected to big cities by heavy traffic. Because the modern farming villages of Korea have an undetachable connection with the cities, special methodology to solve new problems has been posed in the studies of rural settlement. Many scholars have produced a lot of studies of farming villages, and three of them are prominent: Oh. Hong-Seok, Choi, Ki-Yeop, and Lee, Moon-Jong. Oh, Hong-Seok is a versatile and hard-working scholar who has published more papers than anyone else in the various fields of rural geography such as farming villages, fishing villages, mountain villages, and reclamation villages. And he has expanded his concerns to environment issues in recent years. Choi, Ki-Yeop has maintained that the prototype of Korean rural villages is clan villages continuing to write a series of good papers in which he pursues their regionalizion in the process of socialization. Lee, Moon-Jong divides the spatial organization of side settlement, sahachon (settlement near the temple), religion settlement, orchard settlement, settlement near the foreign military camp, displaced people's settlement. Chung Gam Lok settlement, etc. Though The Korean Geographical Society has half a century's history, academic activties in the field of rural settlement have been performed no more than thirty years. We cannot help saying that it is admirable that in such a rather short time we have five academical schools of the rural geography in Korea. geography in Korea.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.578-587
• /
• 2022

Korea, as the world's 7^th largest emitter of greenhouse gases, has raised the national greenhouse gas reduction target as international regulations have been strengthened. As it is possible to utilize coastal and marine ecosystems as important nature-based solutions (NbS) for implementing climate change mitigation or adaptation plans, the blue carbon ecosystem is now receiving attention. Blue carbon refers to carbon that is deposited and stored for a long period after carbon dioxide (CO₂) is absorbed as biomass by coastal ecosystems or oceanic ecosystems through photosynthesis. Currently, there are only three blue carbon ecosystems officially recognized by the Intergovernmental Panel on Climate Change (IPCC): mangroves, salt marshes, and seagrasses. However, the results of new research on the high CO₂ sequestration and storage capacity of various new blue carbon sinks, such as seaweeds, microalgae, coral reefs, and non-vegetated tidal flats, have been continuously reported to the academic community recently. The possibility of IPCC international accreditation is gradually increasing through scientific verification related to calculations. In this review, the current status and potential value of seaweeds, seagrass fields, and non-vegetated tidal flats, which are sources of blue carbon on the east coast, are discussed. This paper confirms that seaweed resources are the most effective NbS in the East Sea of Korea. In addition, we would like to suggest the direction of research and development (R&D) and utilization so that new blue carbon sinks can obtain international IPCC certification in the near future.

• Journal of Space Technology and Applications
• /
• v.1 no.3
• /
• pp.283-301
• /
• 2021

In order to satisfy the intellectual curiosity of mankind to explore the unknown, National Aeronautics and Space Administration (NASA) in the United States and European Space Agency (ESA) in Europe are embarking on various R&D under the motto of the grand dream of pioneering space into a safe and sustainable environment. In the 2020s and 30s, it is expected that advanced giant observation equipment will be in operation, such as the development of a 10-meter-class telescope in space. In Korea, following the development of the 0.15 m Near-Infrared Imaging Spectrometer (NISS), Korea Astronomy and Space Science Institute (KASI) is also participating a 0.2 m Spectro-Photometer for the History of the Universe, Epoch of Reionization, and Ices Explorer (SPHEREx) as an international cooperation partner in small exploration telescope. However, domestic experience in the development and operation of the space telescopes is still insufficient, and there is no plan with long-term prospects for constructing telescopes. In order to answer questions about the unknown world that mankind has not experienced using our own equipment, planning and preparation for the construction of a space telescope through close cooperation among industry-university-institute-government is urgently needed. In this paper, the necessity, background, development goals, and expected effects of the development of the Korean Space Telescope are summarized conceptually, and a working group (WG) is also proposed. In the WG activities, Korea shall take the lead in establishing the Korean-style space telescope development plan, and will start a valuable step to establish the national direction in the field of space astronomy and related technologies. We hope that the WG will be another milestone in Korea's space development.

• Journal of Technology Innovation
• /
• v.5 no.2
• /
• pp.1-21
• /
• 1997

The objective of this paper is to think about what structural reforms of the Korean government S&T development management system might be. Korean society is currently experiencing a drastic socio-economic transformation. The results of this transformation should be reflected on the determining process of the directions and breadths of structural reforms of government S&T development management system. Because the government system design will be based on the premises of socio-economic conditions under which administrative activities perform and also this socio-economic changes can influence on changes of the premises of government management system design. Moreover, S&T development management system is a subsystem of government system so that the directions of structural reform of those subsystems should be considered in the broad framework changes in the development management system of the government. For the last forty years, the Korean government S&T development management system has been based on the premises including transformation from an agrarian society to an industrial society, authoritarianism and centrally controlled institutions, and exteremely small portions of private investments for science and thechonology R & D of the total. Recently, however, the premises of Korean government S&T development management system have rapidly changed. the characteristics of these changes are including tranformation from an industrial society to a knowledge and information intensive society, globalization, localization, and relatively large portion of private investments for science and technology R & C of the total. The basis of government reforms in Korea was the realization of the performances and values through the enhancement of national competitive capacity, attainment of lean government, decentralization and autonomy. However, the Korean government has attached a symbolic value of strategic organizations representing strong policy intentions of government for the science and technology based development. Most problems associated with the Korean government S&T development management system have grown worse during 1990s. Many people perceive that considerable part of this problem was generated because the government could not properly adapt itself to new administrative environment and the paradigm shift in its role. First of all, the Korean government S&T development management system as a whole failed to develop an integrated vision under which processes in formulating science and thechology development goals and developing consistent government plans concerning science and technology development are guided. Second, most of the local governments have little organizational capacity and manpowers to handle localized activities to promote science and technology in their regions. Third, the measure to coordinate and set priorities to invest resources for the development of science and technology was not effective. Fourth, the Most has been losing its reputation as the symbol of ideological commitment of the top policy maker to promote science and technology. Various ideas to reform government S&T development management system have been suggested recently. Most frequently cited ideas are as follow : (ⅰ)strengthen the functions of MoST by supplementing the strong incentive and regulatory measures; (ⅱ)create a new Ministry of Education, Science & Technology and Research by merging the Ministry of Education and the MoST; (ⅲ)create a new Ministry of Science & Technology and Industry ; and(ⅳ)create a National Science and Technology Policy Council under the chairmanship of the President. Four alternatives suggested have been widely discussed among the interested parties and they each have merits as well as weaknesses. The first alternative could be seen as an alternative which cannot resolve current conflicts among various ministries concerning priority setting and resource allocation. However, this alternatives can be seen as a way of showing the top policymaker's strong intention to emphasize science and technology based development. Second alternative is giving a strategic to emphasize on the training and supplying qualified manpower to meet knowledge and information intensive future society. This alternative is considered to be consistent with the new administrative paradigm emphasizing lean government and decentralization. However, opponents are worrying about the linkages and cooperative research between university and industry could be weakening. The third alternative has been adopted mostly in nations which have strong basic science research but weak industrial innovation traditions. Main weakness of this alternative for Korea is that Korean science and technology development system has no strong basic science and technology research traditions. The fourth alternative is consistent with new administrative paradigms and government reform bases. However, opponents to this alternative are worried that the intensive development of science and technology because of Korea's low potential research capabilities in science and technology development. Considerning the present Korean socio-economic situation which demands highly qualified human resources and development strategies which emphasizes the accumulations of knowledge-based stocks, I would like to suggest the route of creating a new Ministry of Education, Science & Technology and Research by intergrating education administration functions and science & technology development function into one ministry.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.98-107
• /
• 2000

Increased use of computers in AEC (Architecture, Engineering and Construction) has expanded the amount of information gained from CAD (Computer Aided Design), PMIS (Project Management Information System), Structural Analysis Program, and Scheduling Program as well as making it more complex. And the productivity of AEC industry is largely dependent on well management and efficient reuse of this information. Accordingly, such trend incited much research and development on ITC (Information Technology in Construction) and CIC (Computer Integrated Construction) to be conducted. In exemplifying such effort, many researchers studied and researched on IFC (Industry Foundation Classes) since its development by IAI (International Alliance for Interoperability) for the product based information sharing. However, in spite of some valuable outputs, these researches are yet in the preliminary stage and deal mainly with conceptual ideas and trial implementations. Research on unveiling the process of the IFC application development, the core of the Design Information management system, and its applicable plan still need be done. Thus, the purpose of this paper is to determine the technologies needed for Design Information management system using IFC, and to present the key roles and the process of the IFC application development and its applicable plan. This system play a role to integrate the architectural information and the structural information into the product model and to group many each product items with various levels and aspects. To make the process model, we defined two activities, 'Product Modeling', 'Application Development', at the initial level. Then we decomposed the Application Development activity into five activities, 'IFC Schema Compile', 'Class Compile', 'Make Project Database Schema', 'Development of Product Frameworker', 'Make Project Database'. These activities are carried out by C++ Compiler, CAD, ObjectStore, ST-Developer, and ST-ObjectStore. Finally, we proposed the applicable process with six stages, '3D Modeling', 'Creation of Product Information', 'Creation and Update of Database', 'Reformation of Model's Structure with Multiple Hierarchies', 'Integration of Drawings and Specifications', and 'Creation of Quantity Information'. The IFCs, including the other classes which are going to be updated and developed newly on the construction, civil/structure, and facility management, will be used by the experts through the internet distribution technologies including CORBA and DCOM.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.307-317
• /
• 2002

In this paper we propose a new mesh reconstruction scheme that produces a displaced subdivision surface directly from unorganized points. The displaced subdivision surface is a new mesh representation that defines a detailed mesh with a displacement map over a smooth domain surface, but original displaced subdivision surface algorithm needs an explicit polygonal mesh since it is not a mesh reconstruction algorithm but a mesh conversion (remeshing) algorithm. The main idea of our approach is that we sample surface detail from unorganized points without any topological information. For this, we predict a virtual triangular face from unorganized points for each sampling ray from a parameteric domain surface. Direct displaced subdivision surface reconstruction from unorganized points has much importance since the output of this algorithm has several important properties: It has compact mesh representation since most vertices can be represented by only a scalar value. Underlying structure of it is piecewise regular so it ran be easily transformed into a multiresolution mesh. Smoothness after mesh deformation is automatically preserved. We avoid time-consuming global energy optimization by employing the input data dependant mesh smoothing, so we can get a good quality displaced subdivision surface quickly.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.3
• /
• pp.465-482
• /
• 2016

Previous researches have introduced various ways to analyze the impact of standardization on innovation while the works are not only small in number but based on interview or case study. This paper addresses the impact of standardization activities within South Korean industries on technological innovation applying an empirical analysis of standardization activities and technological innovation. Drawing on Korean Industrial Standards Classification from panel data of 2003 to 2012, we employed corresponding data of each industrial classification: Number of standards, Accumulated number of standards, Number of patents applied in Korea, Sales, Operational profit, Intangible asset, and R&D invest. In the first model, we run panel data models employing the number of patents applied in Korea as an independent variable, and the number of standards, accumulated number of standards, sales, and operational profit as dependent variables to observe industrial impacts upon the relationship between standards and patents, along with time lagged consideration. The result shows that number of standards are revealed to have a negative influence on patent applications in the year of research, and no significant effect appears for the next two years while positive effect shows up on the third year. Meanwhie, accumulated number of standards turned out to have positive effects on patent applications in Korea. This implies it takes time for innovation subjects to embrace newly established standards while having a significant amount of positive effect on technological innovation in the long term. In the second model, we use canonical correlation analysis to find industrial-wide characteristics. The result of this model is equivalent to the result of panel data analysis except in a few industries, where some industry specific characteristics appear. The implications of our results present that Korean policy makers have to take account of industrial effects on standardization to promote technological innovation.