• 한국콘텐츠학회논문지
• /
• 제15권7호
• /
• pp.428-435
• /
• 2015

우리 기업의 타인자본조달에 관한 통계지표를 살펴보면 대기업은 은행의 기업대출과 회사채 등의 직접금융을 함께 사용하여 자본을 조달하고 있는 반면, 중소기업은 은행대출에 계속 의지하고 있음을 확인할 수 있다. 이러한 현실을 감안하여 본 연구에서는 기업의 타인자본조달을 실증분석하는데 있어 표본선택편의가 존재하고 이를 감안한 연구모형을 사용해야 한다고 주장한다. 이러한 주장을 뒷받침하기 위해 1990년부터 2013년까지의 상장기업 자료를 통해 부채구조를 설명하는 실증분석을 수행한 결과 선행연구에서와 마찬가지로 기업의 회사채사용에 있어 기업규모, 1대주주 지분율, 유형자산 구성비, 수익성, 배당성향 등이 영향을 미치고 있음을 확인할 수 있었으며, 패널표본선택모형에 투입된 Inverse Mills Ratio 변수가 유의하게 나타나 패널표본선택모형을 사용하는 것이 타당함을 확인하였다. 이러한 결과는 기업의 타인자본조달에 있어 표본선택편의가 존재하며 이에 관한 연구에서 이를 반드시 감안해야 함을 의미한다.

• 농업과학연구
• /
• 제49권4호
• /
• pp.949-961
• /
• 2022

The purpose of this study is to build an oyster outlook model. In particular, by limiting oyster items, it was designed as a partial equilibrium model based on a panel analysis of a fixed effect model on aquaculture facilities. The model was built with a dynamic ecological equation (DEEM) system that considers aquaculture and harvesting processes. As a result of the estimation of the initial aquaculture facilities based on the panel analysis, the elasticity of the remaining facility volume in the previous month was estimated to be 0.63. According to Nerlove's model, the adjustment coefficient was interpreted as 0.31 and the adjustment speed was analyzed to be very slow. Also, the relative income coefficient was estimated to be 2.41. In terms of elasticity, it was estimated as 0.08% in Gyeongnam, 0.32% in Jeonnam, and 1.98% in other regions. It was analyzed that the elasticity of relative income was accordingly higher in non-main production area. In case of the estimation of the monthly harvest facility volume, the elasticity of the remaining facility volume in the previous month was estimated as 0.53, and the elasticity of the farm-gate price was estimated as 0.23. Both fresh and chilled and frozen oysters' exports were estimated to be sensitive to fluctuations in domestic prices and exchange rates, while Japanese wholesale prices were estimated to be relatively low in sensitivity, especially to the exchange rate with Japan. In estimating the farm-gate price, the price elasticity coefficient of monthly production was estimated to be inelastic at 0.25.

• 소성∙가공
• /
• 제20권7호
• /
• pp.512-517
• /
• 2011

TRB(Tailor Rolled Blank) is an emerging manufacturing technology by which engineers are able to change blank thickness continuously within a sheet metal. TRB door inner panels with required larger thicknesses can be used to support localized high loads. In this study, the aluminum alloy 5J32 TRB sheet is used for a door inner panel application. The TRB material properties were varied by using three heat treatment conditions. In order to predict the failure of the aluminum TRB during simulation, the forming limit diagram, which is used in sheet metal forming analysis to determine the criterion for failure, was investigated. Full-field photogrammetric measurement of the TRB deformation was performed with an ARAMIS 3D system. A FE model of the door inner panel was created using Autoform software. The material properties obtained from the tensile tests were used in the numerical model to simulate the door inner of AA 5J32 for each heat treatment condition. After finite element analysis for the evaluation of formability, a prototype front door panel was manufactured using a hydraulic press.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.141-146
• /
• 2012

This study deals with the accident model using panel data which are composed of time series data of 2005 through 2007 and cross sectional data of link sections in Cheongju. Panel data are repeatedly collected over time from the same sample. The purpose of the study is to develop the traffic accident model using the above panel data. In pursuing the above, this study gives particular attentions to deriving the optimal models among various models including TSCSREG (Time Series Cross Section Regression). The main results are as follows. First, 8 panel data models which explained the various effects of accidents were developed. Second, $R^2$ values of fixed effect models were analyzed to be higher than those of random effect models. Finally, such the variables as the sum of the number of crosswalk on intersections and sum of the number of intersections were analyzed to be positive to the accidents.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.19-31
• /
• 2022

With the development of 3D-based CAD (Computer Aided Design), attempts at freeform building design have expanded to small and medium-sized buildings in Korea. However, a standardized system for continuous utilization of shape data and BIM conversion process implemented with 3D-based NURBS is still immature. Without accurate review and management throughout the Freeform building project, interference between members occurs and the cost of the project increases. This is very detrimental to the project. To solve this problem, we proposed a continuous utilization process of 3D shape information based on BIM parameters. Our process includes algorithms such as Auto Split, Panel Optimization, Excel extraction based on shape information, BIM modeling through Adaptive Component, and BIM model utilization method using ID Code. The optimal cutting reference point was calculated and the optimal material specification was derived using the Panel Optimization algorithm. With the Adaptive Component design methodology, a BIM model conforming to the standard cross-section details and specifications was uniformly established. The automatic BIM conversion algorithm of shape data through Excel extraction created a BIM model without omission of data based on the optimized panel cutting reference point and cutting line. Finally, we analyzed how to use the BIM model built for automatic conversion. As a result of the analysis, in addition to the BIM utilization plan in the general construction stage such as visualization, interference review, quantity calculation, and construction simulation, an individual management plan for the unit panel was derived through ID data input. This study suggested an improvement process by linking the existing research on atypical panel optimization and the study of parameter-based BIM information management method. And it showed that it can solve the problems of existing Freeform building project.

• 응용통계연구
• /
• 제29권5호
• /
• pp.873-885
• /
• 2016

노지에서 재배되는 양파 생산량은 기후환경에 의하여 영향을 받으며, 특정 지역에서 많이 생산되는 지역적인 특성을 가지고 있다. 따라서 생산량 예측시 기상과 지역을 동시에 고려하는 접근이 필요하다. 본 논문에서는 공간 패널 회귀모형을 이용하여 기상변화에 따른 생산량을 추정하였다. 양파 주산지 13곳에 대한 2006년부터 2015년까지의 기상 패널자료를 사용하여, 공간시차를 반영한 공간자기회귀(spatial autoregressive)모형을 사용하였다. 공간가중치 행렬은 임계치 설정방법과 최근거리 설정방법으로 나누어 분석하여, 최근 3곳까지 거리 설정방법을 사용한 모형이 최종 모형으로 선택되었으며, 자기상관성이 유의함을 보였다. 하우스만 검정을 통해 채택된 확률효과모형으로 분석한 결과 누적일조시간(1월), 평균상대습도(4월), 평균최저기온(6월), 누적강수량(11월) 등이 양파 생산량 예측에 유의한 변수로 나타났다.

• 설비공학논문집
• /
• 제4권3호
• /
• pp.191-203
• /
• 1992

To analyze the unsteady heat transfer phenomena in radiant heating panel, a mathematical model was considered. Numerical analysis for solving the governing equations was conducted by using the finite difference method with boundary-fitted meshes. Transient temperature distributions and thermal responses in heating panel were obtained for various design parameters such as pipe pitches, pipe diameters and pipe depths. Experimental results were also obtained to verify the results of calculation.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.709-714
• /
• 2017

The curved panel is widely used for display of TVs and smart phones. This paper proposes a new auto-focusing method for curved panel inspection system. Since the distance between the camera and the panel varies with the curve position, the camera should change its focus at every inspection time. In order to reduce the focusing time, we propose an effective focusing method that considers the mathematical model of panel curve. The Lagrange polynomial equation is applied to modeling the panel curve. The foci of initial three points are used to get the curve equation, and the other foci are calculated automatically from the curve equation. The experiment result shows that the proposed method can reduce the focusing time.

• 소성∙가공
• /
• 제24권2호
• /
• pp.107-114
• /
• 2015

The current study presents a geometric measurement and analysis of the section profile for a feature line surface on an automotive outer panel. A feature line surface is the geometry which is a visually noticeable creased line on a smooth panel. In the current study the section profile of a feature line surface is analyzed geometrically. The section profile on the real press panel was measured using a coordinate measuring machine. The section profiles from the CAD model and the real panel are aligned using the same coordinate system defined by two holes near the feature line. In the aligned section profiles the chord length and height of the curved part were measured and analyzed. The results show that the feature line surface on the real panel is doubled in width size.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.767-783
• /
• 2014

The use of composite materials to strengthen reinforced concrete (RC) structures against blast terror has great interests from engineering experts in structural retrofitting. The composite materials used in this study are rigid polyurethane foam (RPF) and aluminum foam (ALF). The aim of this study is to use the RPF and the ALF to strengthen the RC panels under blast load. The RC panel is considered to study the RPF and the ALF as structural retrofitting. Field blast test is conducted. The finite element analysis (FEA) is also used to model the RC panel under shock wave. The RC panel performance is studied based on detonating different TNT explosive charges. There is a good agreement between the results obtained by both the field blast test and the proposed numerical model. The composite materials improve the RC panel performance under the blast wave propagation.