• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.1-7
• /
• 2013

본 연구에서는 개발된 선미부에 수직날개를 부착한 선박의 조파저항성능을 예측할 수 있는 수치해석기법의 검증에 관한 것이다. 수치해석기법은 비점성 유동장 해석기법인 랜킨소오스 패널법과 와류격자법을 사용하여 개발하였으며, 자유수면 경계조건의 비선형성은 반복해법을 사용하여 만족시켰고, 선박의 트림과 침하량을 구하는 알고리즘을 포함하고 있다. 수치해석을 위한 선체표면의 패널을 생성하기 위하여 패널절단법을 사용하였다. 4000TEU 컨테이너 운반선을 대상 선박으로 하여 선미부 6개소의 서로 다른 위치에 수직날개를 부착하여 수치해석을 수행하였으며, 수치해석기법의 타당성을 검증하기 위하여 상용 점성 유동장 해석 프로그램인 FLUENT를 사용하여 선체 주위의 점성 유동장을 계산하였고, 모형시험을 수행하여 얻은 실험 결과를 수치해석 결과와 서로 비교하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1597-1600
• /
• 2005

Recently, the trends of TFT-LCD are large scale and thin thickness, so, the demands of Light Guide Panel(LGP) which is able to substitute for prism sheets are appeared. Functions of LGP obtaining polarization of light of the prism sheet as well as the incidence and reflection of light are demanded. This prismless type LGP to complete functions of the existing LGP and polarization at once must be supported by micro machining technology of LGP surface. In this research, we have used the STAMPER method for the mass product and In-Line process, and the optimized conditions are established by analyzing the cutting force and conditions according to the material and processing properties when the prismless type LGP mold is fabricated. Parameters of the cutting condition were the workpiece and cutting depth.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.199-212
• /
• 2015

Environmentally-friendly whole-cut designs can minimize carbon dioxide emissions which are harmful to the earth, and reduce energy, labor force and time in cutting or sewing clothes. The design and way of wearing clothing will be investigated by classifying whole-cut clothing appearing in the history of costume and past traditional outfits such as Drapery, a Pancho, Tunic, or Loincloth. According to the results from the analysis of whole-cut methods applied in design, they were classified as follows: whole-cut, utilizing square-panels as is, pleats, smoking, lip band, origami, cutting way, and subtraction-cutting whole-cut design. The whole-cut design utilizing square panel as it is can minimize the waste of energy and material but can also maximize the possibility of circulation by recycling. In utilizing an all square panel, it broke away from the existing whole-cut in the western pattern, namely, the pattern of clothes clinging to the body, and was found to have new aesthetic value with a new approach. Due to the whole-cut method having a restriction in the use of dart and line cutting in its designing process, there were only designs that did not show the body line, such as designs clinging to the body. Therefore we developed a design similar to those that cling to the body by whole-cut, In addition, the work produced was with high efficiency and variability, which produces simple designs but can be worn in a variety of ways.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.9-17
• /
• 2010

The FPCB is used for electronic products such as LCD display. The process of manufacturing FPCB includes a cutting process, in which each single FPCB is cut and separated from the panel where a series of FPCBs are arrayed. The most-widely used cutting method is the mechanical punching, which has the problem of creating burrs and cracks. In this paper, the cutting characteristics of the FPCB have been experimented using Nd:YAG DPSS UV laser as a way of solving this problem. To maximize the industrial application of this laser cutting process, test samples of the multilayered FPCB have been chosen as it is actually needed in industry. The cutting area of the FPCB has four different types of layer structure. First, to cut the test sample, the threshold laser cut-off fluence has been found. Various combinations of laser and process parameters have been made to supply the acquired laser cut-off fluence. The cutting characteristics in terms of the variation of the parameters are analyzed. The laser and process parameters are optimized, in order to maximize the cutting speed and to reach the best quality of the cutting area. The laser system for the process automation has been also developed.

• 항공우주시스템공학회지
• /
• 제15권5호
• /
• pp.81-88
• /
• 2021

일반적으로 큐브위성용 전개형 태양전지판을 수납 및 전개시키기 위해 사용되는 구속분리장치는 비폭발식 나일론선 절단방식이 적용된다. 그러나 상기 방식은 태양전지판 수납 상태에서 큐브위성의 배터리 충전, PCB 및 탑재체의 전기적 점검 및 시험 등을 위한 접근 포트 연결 시 분리장치의 구속해제 및 재채결 작업이 반복적으로 요구된다. 따라서, 기존의 구속분리장치는 위성체 내부 접근을 위해서는 작업자의 번거로움 및 일관된 나일론선 체결작업 공정 유지의 어려움이 존재한다. 본 연구에서는 나일론 선 절단 없이 구속 핀 분리만으로 자유롭게 태양전지판 전개 및 수납이 가능한 Pin-puller형 태양전지판 구속분리장치를 제안하였으며, 기능 및 성능검증을 위한 분리장치의 전개시험 및 최대 분리하중 측정 시험을 통해 분리장치 설계의 유효성을 입증하였다.

• 한국자동차공학회논문집
• /
• 제2권5호
• /
• pp.74-84
• /
• 1994

This paper discusses a method to generate the tool path for NC machining of automobile panel dies. The source data representing a panel die may be generated from digitizing machines, other CAD/CAM systems via IGES files, of compound surface models. From the source data, three types of interferencefree tool paths are generated automatically ; a parallel (Cartesian), an isometric, and a pencil cutting tool path. For the interference-free tool path, a polyhedral model composed of several triangles, and an 'offset triangle' approach are exploited. Finally, some practical examples are illustrated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.759-762
• /
• 2005

The LGP(Light Guide Panel) for the back light unit that is used to the 2.2" TFT LCD was designed and fabricated. The method of the pattern design which is the most important in the design of the LGP was converted the V-cutting method into the Dot method. This newly developed Dot method provided a good uniformity in the brightness at the LGP, which was a very difficult problem to solove in the V-cutting method. The experiment result of the newly designed LGP shows the brightness uniformity 90% and the brightness 3656 $cd/\;m^2$ which is 20% higher than the commercial products.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.87-96
• /
• 2010

PAP method is a combined measures which consist a anchored retaining wall method with permanent ground anchors and vertical precast concrete panels, step by step on the slope surface. And soil is back filled between slope and vertical precast panels. Therefore, this method is more effective than any other ground anchor reinforcing methods of slope stability, for example cross type concrete block ground anchor or buttress concrete block ground anchor method. Because of increasing effective anchor force and green tree planting.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.591-600
• /
• 2005

There are many cross tunnelling methods such as NTR, TRCM, Messer Shield, Front Jacking, and Pipe Roof Method. The advantages of adopting RPS(roof panel shield) method in crossing tunnel construction with comparing other existing cross tunnelling method are needed a little space and easy to change the direction of cutting shoe during the construction of pipe roof. The numerical analysis of RPS was performed for the application in the crossing tunnel under railroad. The earth pressure distribution and settlement were predicted when the RPS method was applied during the excavation for crossing railroad tunnel construction.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.219-223
• /
• 2005

Nowadays laser cutting is the most promising method of cutting FPD(Flat Panel Display) glass in mass-production line. And this method can also be used to cut other brittle materials such as quartz, sapphire, ceramic and semiconductor The concept of this method is shown in picture 1. Laser beam heats glass up to strain point, not to melting point and cooling system chills glass to induce maximun thermal stress in glass surface and then the thermal stress generates micro thermal crack, in other words blind depth of crack, along laser beam and cooling line.