• 한국해양공학회지
• /
• 제23권2호
• /
• pp.87-91
• /
• 2009

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. The geometric inaccuracy caused by welding distortion tends to preclude the introduction of automation and mechanization and requires additional man-hours for adjustment work during the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method that can explicitly account for the influence of various factors on the welding distortion. The validity of this prediction method must also be clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the plastic counter-deforming method (PCDM), which uses line heating as the optimum distortion control method. The validity of this method was substantiated by a number of numerical simulations and actual measurements.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.75-79
• /
• 2003

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. This geometric inaccuracy caused by the welding distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. The validity of the prediction method must be also clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the plastic counter-deforming method (PCDM) using the line heating as the optimum distortion control method. The validity of this method has been substantiated by a number of numerical simulations and actual measurements.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.16-25
• /
• 2007

A comparative study on the turbulent flaw simulation and the potential flaw analysis has been performed. A law Mach number preconditioned Navier-Stokes solver, using the multi-block grid method and a panel method based on the velocity potential, have been developed and validated by comparison to the experimental data. The present numerical analysis methods are applied to the ground effect problem around the NACA 4412 airfoil. It has been confirmed that the potential flaw analysis on the ground effect, using the image method, is consistent, to some degree, with the viscous calculations for high Reynolds number flows.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.158-162
• /
• 2002

본 논문에서는 선박의 평블록을 조립하는 공장의 월/주간 일정계획을 수립하는 과정에서 계획의 정도를 향상시키기 위해 시뮬레이션을 적용하는 방안에 대해 다루고 있다. 조선 평블록 조립의 일정계획 수립은 표준 데이터를 근간으로 계획을 수립하므로 일정계획의 정도가 낮을 수 있다. 그리고 공장의 제반 여건 및 운영 방안을 일반적인 일정계획 기법에 반영하여 정도가 높은 일정계획을 수립하는 것은 매우 어려운 일이다. 하지만 시뮬레이션에서는 공장의 제반 여건을 상세하게 묘사 가능하고, 시뮬레이션 수행 후 해당 일정계획의 정도 및 여러 사항에 대해 많은 정보를 얻을 수 있다. 따라서 본 논문에서는 수립된 일정계획에 대해 시뮬레이션을 통해 평가하고, 해당 일정계획의 문제점을 사전에 발견하여 조치함으로써 일정계획의 정도를 한층 높이고자 한다.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1340-1345
• /
• 2010

FRC(Frame Rate Control) has been applied to the monitor and TV product as part of cost-saving in many flat panel display manufacturers. As FRC can represent the same number of gray scale level with bits of a smaller amount than bits of the input image data, it is widely used. However, FRC causes visual artifacts by using repeatedly pre-designed the FRC unit size of block pattern in display devices. Therefore, this paper analyzes the cause of the visual artifacts. And in order to improve them, it proposed the pattern arrangement of FRC unit blocks through frame rolling method as analytic solution for the first time. So, we could embody causes of FRC noise. Using the proposed structure, more robust pattern to FRC noise will be designed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.972-974
• /
• 2009

This paper presents smart regional contrast enhancement technique of partitioned image for local dimming backlight on small-sized mobile display to reach two goals. One is to save the power consumption, and the other to improve contrast ratio of display image. Recently new advanced method is proposed, named local dimming method, that backlight LED is positioned on backside of the display panel. So it is important to partition an image by sub blocks and then post-processing independantly. This means regional contrast enhancement. After partitioning, we compare the mean luminance(Y) value of each sub-block image with the one of original whole image. If some blocks have the mean value lower than the one of whole image, they are processed with the proposed method and others are bypassed. Simultaneously the information of the processed blocks are transferred to BLC(Backlight LED Controller). And then the supply current of each backlight LED is reduced to realize the contrast ratio enhancement and at the same time to power consumption reduction. In addition, we verify this proposed method is free from blocking artifacts.

• 의학교육논단
• /
• 제20권1호
• /
• pp.6-14
• /
• 2018

In recent years, Korean medical schools have shown a growing interest in the longitudinal integrated clerkship (LIC) as a means of improving clinical education. Some overseas medical schools have tried the LIC since the 1970s. In the 1990s, several universities in the United States, Canada, and Australia introduced LICs. A variety of studies have confirmed positive results of the LIC. Traditional block-rotation is a discipline-based, inpatient-centered practice. Instead, under the LIC system, a medical student responsible for a panel of longitudinal patients observes developments of their diseases, serving several departments simultaneously. Overseas medical schools have different LIC models depending on their affiliate hospitals' sizes and characteristics. The purpose of this study is to introduce LIC practices in Harvard Medical School and University of California San Francisco, which could be applied by Korean medical schools. This paper also aims to find out the strategies that have been able to help the two US medical schools implement the LIC successfully.

• 지능정보연구
• /
• 제2권2호
• /
• pp.29-42
• /
• 1996

본 논문은 조선업에서 평블럭을 생산하는 패널블럭조립공장의 일정계획 문제를 해결하기 위한 유전알고리즘의 적용 방안을 제시하고 있다. 패널불럭조립공장의 일정계획은 작업장별 평준화와 각 작업장내에서의 일자별 부하 평준화라는 두가지 목표를 가지고 있다. 이러한 목표를 달성하기 위해 본 논문에서는 유전알고리즘을 계층적으로 나누어 적용하였다. 상위단계 유전알고리즘은 작업장별 부하 평준화를 담당하며 하위단계 유전알고리즘은 상위단계 유전알고리즘의 결과를 바탕으로 각 작업장내에서 일자별 부하 평준화의 최적화를 담당한다. 실험 결과, 유전알고리즘에 의한 일정계획이 수작업에 의한 방법보다 처리시간이 짧게 소요되고 부하 평준화의 측면에서 더 좋은 해를 얻을 수 있음을 확인하였다.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.68-74
• /
• 2006

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. This geometric inaccuracy caused by the welding distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. The validity of the prediction method must be also clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the mechanical tensioning method (MTM) as the optimum distortion control method. The validity of this method has been substantiated by a number of numerical simulations and actual measurements.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.137-138
• /
• 2019

태양광 접속반은 태양전지에서 발생된 전압을 인버터에 연결해주는 장치이다. 태양광 접속반에는 인버터에서 태양전지로 흐르는 역전압을 차단하기 위해 다이오드가 사용된다. 이 다이오드의 발열이 태양광 접속반 화재의 주 원인이다. 본 논문에서는 IoT 기기들을 사용하여 다이오드의 발열상태를 감시하고 화재를 예방하는 방법을 제안한다.