• Journal of Welding and Joining
• /
• 제24권5호
• /
• pp.62-66
• /
• 2006

Panel line is an important process occupying the largest work amount in shipbuilding. In this research product simulation has been carried out to establish the optimal production scheduling. For this purpose a web-based panel line simulator was developed using an object modeling technology and C# language. The balance of work-load and increase in the productivity by the improvement of production facilities and process are the key factors for a good scheduling. In this study SPRT(Shortest Remaining Process Time) rule was applied for the work-load balancing and a good result achieved. To increase the productivity in the stiffener welding stage which is a bottleneck; process, more welding heads and higher welding speed were tested using the developed simulator. The simulation results showed that either more welding head or higher welding speed decreased the total work time. Use of both, however, deteriorated the productivity because of the bottleneck in the following stage. This result points out that the improvement of production facilities and/or process should be evaluated with their influences on the leading and following processing stage.

• 한국CDE학회논문집
• /
• 제13권1호
• /
• pp.36-44
• /
• 2008

This paper proposes a modeling and simulation process of a panel production line (PPL) in a shipyard. The panel production line is an assembly process to produce a main panel of a flat block and a curved block. In this paper, its activity analysis is carried out using expression of IDEF0, and its process is qualitatively and quantitatively analyzed and modeled by Petri Nets. A commercial discrete event simulation tool, $QUEST^{TM}$, is used for virtual PPL and simulation. The modeling results by Petri Net are mapped to elements of the simulation tool. Finally, an integrated simulation environment of PPL is implemented in order to efficiently utilize the virtual PPL model. With the help of IDEF0 and Petri Nets, we could systematically analyze and describe the PPL process that are characterized as being concurrent, asynchronous, distributed, parallel, nondeterministic, and/or stochastic. Also, the dynamic and concurrent activities of a PPL system were able to be simulated. A timing concept can be included into the Petri nets model to evaluate performance and dependability issues of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.262-271
• /
• 2013

Owing to the development of mobile communication technology during the last a few years, the number of users of mobile devices such as the smartphone and the tablet PC has increased rapidly. As a result, the range of applications of the mobile devices has also been greatly expanded from an application for the convenience of daily life to an application for assisting the operations of industrial fields. Especially, portability of mobile devices can provide great help in collecting and using information on the production site. In shipbuilding production processes, it is difficult to collect changes of circumstance in the field and reflect the changes to schedule due to the low production automation rate and frequent changes in schedule. In this study, we propose a system to solve the problems of shipbuilding production processes such as the ones described above by using mobile devices. First of all, we organize the production information and production processes of the panel line through the analysis of shipyard panel line operations. Next, we have developed a system that can support the production execution plan of the panel line and monitor the production processes in the field. The system was developed utilizing application virtualization to allow access to the system from various platforms of mobile devices and PC's. The system was implemented using ooCBD methodology considering the future expansion of the system and ease of maintenance.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권12호
• /
• pp.768-772
• /
• 1999

A new TFT-LCD panel with air-bridge type gate to data line inter-crossing has been proposed and its characteristics have been measured. The proposed structure has air-gap between gate and data line inter-crossing. This air-bridge TFT-LCD panel has very small capacitance between gate and data line. The new panes structure achieves 9 times fast signal propagation compared with conventional panel, which enables to have enough design margin for 20-inch diagonal and larger size UXGA panel. We have examined thermal and mechanical durability of new panel to verify applicability for commercial AMLCD production. After TEOS and polyimide passivation, this panel withstood a thermal stress at $250^{\circ}C$ and a mechanical stress during the rubbing process.

• Journal of Information Display
• /
• 제13권1호
• /
• pp.17-20
• /
• 2012

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.398-408
• /
• 2016

Based on non-completely hybrid flow line scheduling of panel block in shipbuilding, several uncertain factors influencing the problem were analyzed in a real environment, and a nonlinear integer programming model was built for each sub-scheduling problem. To narrow the difference between theory and application, rolling horizon and rescheduling methods are proposed. Moreover, with respect to the uncertainty of processing time, arriving time and due time, we take the minimizing of the early and delayed delivery costs as the objective, and establish an evaluation with a global penalty function. Finally, numerical experiments and a simulation analysis were undertaken to demonstrate the effectiveness of the model and algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.946-949
• /
• 2005

This paper deals with the algorithm development that inspects defects such as Bright Defect Dots, Dark Defect Dots, and Line Defect caused by the process of LCD(Liquid Crystal Display). While most of LCD production process is automated, the inspection of LCD panel and its appearance depends on manual process. So, the quality of the inspection is affected by the condition of worker. Especially, the more LCD size increases, the more the worker feels fatigued, which causes the probability of miss judgement. So, the automated inspection is required to manage the consistent quality of the product and reduce the production costs. In this paper, to solve these problems, we developed the imaging processing algorithm to inspect the defects in captured image of LCD. Experimental results reveal that we can recognize various types of defect of LCD with good accuracy and high speed.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권4호
• /
• pp.301-319
• /
• 2008

The display market has been replaced by the FPD (Flat Panel Display) from the CRT (Cathode-Ray Tube) since the late 1990s. In the FPD production line, the most equipment has high price. Thus, when the equipment has multi-function, the repetitive process is arranged for the equipment. However, such disposition of equipment results in more complicated process flow owing to repetitive operations. This reduces the production capacity and increases lead-time in turn. In this paper, we develop an AutoMod simulation system that derives to information about the quantity, production lead-time, utilities of facilities, and occupation rates of racks. In this simulation system, we consider the situation where the equipment might be broken and suspended randomly. For the developed system, we first evaluate a production plan with current layout and then, propose a revised alternative plan. Using the same simulation scheme, we investigate comparing the production quantity and lead-time with the two plans. In addition, for a proposed alternative, we try to forecast the most adequate rule between the two job dispatching rules which are FOR (Fewest Operation Remaining) and FCFS (First Come First Serve) through simulation.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.602-608
• /
• 2014

Mixed-model production lines are often used in manufacturing systems. In production lines, different product types are simultaneously manufactured by processing small batches. This paper describes a new welding assembly technology involving the development of experimental models for a mixed-model production line in an automobile company. Due to the extensive number of models, the design of a welding assembly system is complicated. Performance evaluation is an important phase in the design of welding assembly lines in a mixed-model production environment. In this study, a new welding assembly technology for a mixed-model production method was used to weld the package tray and dash panel of a vehicle.