• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.114-117
• /
• 2006

The air filter in engine intake system has a function of filtrating the dirt in the scavenging air as well as attenuating the noise. The noise attenuation within the air cleaner filter, however, has been regarded as negligible by the field engineers. In this paper, for the analysis of the acoustical performance of air filter, an acoustical model was suggested and the characteristics of air filter system were investigated. Fibrous structure of the filter element was modeled as a micro-perforated panel using the flow resistivity and porosity. The pleated geometry of the filter element was modeled as two coupled ducts that have permeable walls, in which each duct area was assumed being constant. Using such simplified geometry, a mathematical model was developed for the sound propagation within a narrow duct system. Visco-thermal effect was considered in modeling the sound propagation through such tubes; the filter box was modeled as a rigid rectangular box. By combining two models, a four-pole transfer matrix was derived. For the validation purpose, transmission loss was measured for a plastic rectangular box containing an air filter. A noticeable effect of the air filter element was observed by including the filter into the box. Comparing the predicted and measured data, we found that the predicted TL agrees well with experimental results, in particular, in magnitude and frequency at TL troughs.

• 한국농공학회논문집
• /
• 제46권2호
• /
• pp.41-47
• /
• 2004

A model test is carried out to investigate flow-induced vibration of a Tainter gate in estuary sulices. The gate model scaled with the ratio of 1:25 is made of acryl panel dimensioned 0.66 m in width, 0.5 m in height in the concrete test flume. Firstly, natural frequencies of the model gate are measured and the results are compared with the numerical results in order to verify the model. In the flow from the gate inside to the gate outside, the amplitudes of the vibration are measured under the different gate opening and downstream water level conditions. Also revised gate models with 20 mm bottom width are tested under the different gate openings and water levels. The results are analyzed to study the characteristics of the Tainter gate vibration in the sea ward flow. These test results are assessed in comparison with the results in the lake ward flow, as a result, presents the dynamic characteristics of the Tainter gate and a basic data for the guide manuals of gate management.

• 자원ㆍ환경경제연구
• /
• 제22권1호
• /
• pp.3-29
• /
• 2013

The purpose of this study is to estimate consumer preferences on hybrid cars and electric cars by employing a choice experiment reflecting the various market conditions, such as different projected market shares of green vehicles and $CO_2$ emission regulations. Depending on different market scenarios, we examine as to which attribute and individual characteristic affect the preferences of potential consumers on green vehicles and further, forecast the potential market shares of green cars. The primary results, estimated by a conditional logit and panel probit models, indicate that sales price, fuel cost, maximum speed, emission of air pollutants, fuel economy, and distance between fuel stations can significantly affect consumer's choice of environment-friendly cars. The second finding is that the unique features of electric cars might better appeal to consumers as the market conditions for electric cars are improved. Third, education, age, and gender can significantly affect individual preferences. Finally, as the market conditions become more favorable toward green cars, the forecasted market shares of hybrid and electric vehicles will increase up to 67% and 14%.

• 한국안전학회지
• /
• 제21권2호
• /
• pp.57-62
• /
• 2006

Recent trends in the construction of building frame feature the use of composite steel concrete members. One of such system, RCS(Reinforced Concrete column and Steel beam) system, is known as a type of system to maximize the structural and economic benefits in the most efficient manner. This paper is focusing on an study of ultimate shear strength estimation of the interior beam-column joints of RCS system, with reinforced concrete column and steel beam. Current design methods as well as the majority of the previous researches for ultimate shear strength of the interior beam-column joint of RCS system are not easy to apply actual manner. There is a need to propose the rational macro models based on analytical approach. In this study, design method variables for interior beam-column joints of RCS system is studied assuming shear resistance of steel web panel, diagonal concrete strut mechanism and truss mechanism. Finally, calculated results based on the proposed design model are compared with test data.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.310-323
• /
• 2013

In this paper, the aeroelastic static response of flexible wings with arbitrary cross-section geometry via a coupled CUF-XFLR5 approach is presented. Refined structural one-dimensional (1D) models, with a variable order of expansion for the displacement field, are developed on the basis of the Carrera Unified Formulation (CUF), taking into account cross-sectional deformability. A three-dimensional (3D) Panel Method is employed for the aerodynamic analysis, providing more accuracy with respect to the Vortex Lattice Method (VLM). A straight wing with an airfoil cross-section is modeled as a clamped beam, by means of the finite element method (FEM). Numerical results present the variation of wing aerodynamic parameters, and the equilibrium aeroelastic response is evaluated in terms of displacements and in-plane cross-section deformation. Aeroelastic coupled analyses are based on an iterative procedure, as well as a linear coupling approach for different free stream velocities. A convergent trend of displacements and aerodynamic coefficients is achieved as the structural model accuracy increases. Comparisons with 3D finite element solutions prove that an accurate description of the in-plane cross-section deformation is provided by the proposed 1D CUF model, through a significant reduction in computational cost.

• 한국항만경제학회지
• /
• 제31권3호
• /
• pp.187-201
• /
• 2015

본 연구의 목적은 FTA 발효효과가 제89류 교역량 증대에 미치는 영향을 분석하여 조선 산업에 FTA가 미친 영향을 살펴보고자 함에 있다. 이를 위해 HS 89류 교역량 자료를 패널중력모형으로 분석하였다. 분석 결과 종속변수인 제89류 교역량은 FTA 발효효과와 정비례 관계를 나타내었다. 이러한 분석 결과는 FTA 발효 효과 그 자체는 조선 산업의 수출과 수입을 늘리는데 영향을 미쳤다고 볼 수 있다. 우리나라의 조선 산업은 2012년 이후 약화된 경쟁력으로 인하여 선박 수출이 계속해서 감소하고 있다. 이러한 조선 산업은 국가경제에 큰 이바지를 하는 기간산업이자 우리의 주력 수출산업이다. 이러한 조선 산업의 침체를 막고 수출을 증대시키기 위해서는 조선 산업 자체의 경쟁력을 높이기 위한 노력과 함께 FTA를 적극적으로 활용할 수 있는 토대를 마련하는 것이 중요하다.

• 대한가정학회지
• /
• 제39권12호
• /
• pp.51-63
• /
• 2001

With the development of information technology, more and more internet sites are available to consumers. Increasing on the interests of diet and health in modem society, there are numerous internet sites dealing with food, nutrition and health. Considering the importance and expected roles of internet sites in information dissemination in the future world, it is important to put more efforts to encourage internet sites with more accurate an useful information. Up to present, not much work has been done on quality analysis and evaluation of the internet information. This study aimed to develop a model to evaluate and rank the internet information according to its quality so that consumers can be guided toward correct information source. Three models were adapted from the literature for pilot study to develop a model suitable for evaluation of contents of sites related to food and nutrition information. From the pilot study, a evaluation model was developed with criteria more relevant to Korean internet site by expert panel. Evaluation criteria of the model is authority, accuracy, objectivity, coverage, and user-friendliness. For the objective and systematic evaluation, scores were assigned totaling maximum 100 point to each evaluation criteria factors. The model developed in this study could be used as one for other internet sites in area other than food and nutrition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.20-27
• /
• 2009

This paper presents an analytic study for replacement of the ballast track in existing subway bridge by the Precast slab panel(B2S) track. To evaluate the dynamic responses on application of B2S track, the time history analysis with the 3D modeling. A total of two models, which were one ballast track bridge and B2S track bridge, were used in the FE analysis. The results of this study show that the dynamic displacement and acceleration of the B2S track bridge were significantly reduced for a higher train speed, compared to the ballast track bridge. Also, the replacement of the ballast track bridge in existing subway bridge by the B2S track increased the structural safety of bridge and ensured sufficient dynamic stability and serviceability. As a result, the servicing subway bridge with B2S track system has need of the reasonable measures which could be reducing the static and dynamic response and improving the performance.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권2호
• /
• pp.99-106
• /
• 2020

CEOs Overconfidence can bring potentially risky early decisions to businesses, along with large enterprise free cash flow that can bring different investment decisions with CEOs Overconfidence. Especially in the context of Vietnamese enterprises, CEOs are often influenced by behavioral psychology about overconfidence in investment decisions (due to individual cultural characteristics as well as operating financial markets also depend on many factors outside the market). Therefore, the authors study the impact of overconfidence and cash flow on investment in Vietnamese to find the internal relationship between these three factors in the financial environment in Vietnam. With 480 companies listed on the Vietnam Stock Exchange from 2014 to 2018 (companies have continuous reports), the regression analysis results with panel data (FEM, GLS models, correction of robust and GMM dealing with endogenous problems) have shown Overconfidence has a positive impact on investment. At the same time, the results also indicated that enterprises with overconfident CEOs and large cash flows tend to invest less than enterprises with low cash flow. The results of this study have shown the behavioral behavior of CEOs in Vietnamese enterprises that exist under both prospect theory and effective market theory.

• 유통과학연구
• /
• 제15권6호
• /
• pp.25-36
• /
• 2017

Purpose - The purpose of the study was to investigate the financial difficulty of the elderly in each income group and to examine the factors having related influence. The study adopted models with Korean welfare panel material and examined factors that having influence upon low income elderly's selection on retail business. Research design, data, and methodology - The study investigated the effects having influence upon the financial difficulty of elderly household as well as common household. It also examined independence variables having influence upon household's financial stress and found out the direction of financial control in elderly household. The study investigated the effect of financial stress upon economy to support consumption of the elderly. Results - In cases of financial difficulties, independent variables of the debt increased the financial difficulties of elderly households relying upon traditional markets. The elderly households had financial difficulties because of independent variables of the debt except for loan from financial institution. Conclusions - In this study, the elderly's financial stress had influence upon the use of retail business and the characteristics of residing and family. Further study shall give support policies for the elderly to alleviate financial burden.