• Advances in aircraft and spacecraft science
• /
• v.6 no.6
• /
• pp.443-461
• /
• 2019

This communication investigates exact and distorted similitudes and the related scaling laws for the analysis of both dynamic response and radiated power of rectangular plates. The response of a given panel in similitude from another one is determined from a generalization of the modal approach, allowing the use of mode shapes, natural frequencies and finally radiation functions in order to establish appropriate scaling laws. Analytical models of simply supported rectangular plates are used to produce both original and replica model responses under point mechanical excitation. Emphasis is then especially put on laboratory experiments which are performed on baffled simply supported aluminum panels under mechanical excitations. All the six possible scaling directions, i.e. predicting a plate vibroacoustic reponse from another plate, are reported. All obtained results show that structural response or radiated sound power of a given plate can be both recovered with satisfactory accuracy by using the related scaling laws, even if parent models are used.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.242-247
• /
• 2010

To consider effects of essential parameters of water impact pressure on dynamic structural responses of bow bottom structures, a parametric study for a ship bottom panel is carried out. The idealized pressure time history models were assumed by triangular and rectangular shapes in time domain. The main loading parameters are duration time and peak pressure value maintaining the same impulse value. The structural models for local bottom stiffened panels of a container ship are analysed. The natural frequency analysis and transient dynamic response analysis are performed using MSC/NASTRAN. Added mass effects of contacting water are considered and the pressure distributions are assumed to be uniform in the whole water contacting surface. The effects of loading parameters on the structural responses, especially maximum displacements, are considered. Besides the peak pressure value, effects of duration time correlated with natural frequencies are thought to be the important parameters.

• Journal of Distribution Science
• /
• v.11 no.7
• /
• pp.5-13
• /
• 2013

Purpose - The study explores social well-being of the community of five selected countries of the South Asia: India, Pakistan, Sri Lanka, Nepal and Bangladesh. The study compares effectiveness of macroeconomic policies across the countries through interactive effects of the macroeconomic policy variables with the regional dummy variables. Research design, data, and methodology - Using the data set for the period of 1990-2008, this study employs panel data models, quantile regression methods, and the fixed effects method, which the constant is treated as group or country-specific. The model can also be known as the least-squares dummy variables estimator. Results - The results reveal significant chances of improvement in the well-being of the people while living in India and Pakistan as compared to the other countries of the region where India relatively stands with better chances of providing opportunities to improve the well-being of the people. Conclusions - This study recommends an increasing allocation of budget on education and health in order to enhance social well-being in the South Asian region. Inflation is the main cause of deteriorating well-being of the South Asian community by escalating the cost of living. Comprehensive study is recommended by employing the micro data models in the region.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.15-30
• /
• 2011

This study is designed to measure the relative efficiency of regional fishery cooperatives based on Data Envelopment Analysis(DEA) methods. Selecting 40 regional fishery cooperatives in Busan as Decision Making Units (DMUs), the study uses their panel data from 2007 to 2008 to rank the relative efficiency of the DMUs. First, the efficiency score of the DMUs are calculated using CCR, SBM, and super-SMB model. Within the model, input variables are the number of employees and area of fishery cooperatives. Output variables are the amount of deposit money, loan and profit. Based on the efficiency scores calculated from super-SMB model, the efficiency ranking of the DMUs is determined. Second, the differences in average efficiency calculated from the three DEA models are tested using a pair-wise mean comparison test. The results based on the efficiency scores evaluated from super-SMB model show that seven out of the forty DMUs are efficient; among the efficient DMUs, the DMUs that can be benchmarked for inefficient DMUs through the frequency analysis of reference set being identified. Third, the differences in average efficiency of the three DEA models between 2007 and 2008 are tested using pair-wise mean comparison test and the study estimates the efficiency change of the DMUs between 2007 and 2008 using Malmquist productivity index(MPI). Finally, the paper suggests an improved composite DMU superior to the inefficient DMUs evaluated by Super-SBM model.

• Nutrition Research and Practice
• /
• v.12 no.3
• /
• pp.251-257
• /
• 2018

BACKGROUND/OBJECTIVES: There are few studies that forecast the future prevalence of obesity based on the predicted prevalence model including contributing factors. The present study aimed to identify factors associated with obesity and construct forecasting models including significant contributing factors to estimate the 2020 and 2030 prevalence of obesity and abdominal obesity. SUBJECTS/METHODS: Panel data from the Korea National Health and Nutrition Examination Survey and national statistics from the Korean Statistical Information Service were used for the analysis. The study subjects were 17,685 male and 24,899 female adults aged 19 years or older. The outcome variables were the prevalence of obesity (body mass index ${\geq}25kg/m^2$) and abdominal obesity (waist circumference ${\geq}90cm$ for men and ${\geq}85cm$ for women). Stepwise logistic regression analysis was used to select significant variables from potential exposures. RESULTS: The survey year, age, marital status, job status, income status, smoking, alcohol consumption, sleep duration, psychological factors, dietary intake, and fertility rate were found to contribute to the prevalence of obesity and abdominal obesity. Based on the forecasting models including these variables, the 2020 and 2030 estimates for obesity prevalence were 47% and 62% for men and 32% and 37% for women, respectively. CONCLUSIONS: The present study suggested an increased prevalence of obesity and abdominal obesity in 2020 and 2030. Lifestyle factors were found to be significantly associated with the increasing trend in obesity prevalence and, therefore, they may require modification to prevent the rising trend.

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.293-302
• /
• 2020

Connections play a significant role in strength of structures against earthquake-induced loads. According to the post-seismic reports, connection failure is a cause of overall failure in reinforced concrete (RC) structures. Connection failure results in a sudden increase in inter-story drift, followed by early and progressive failure across the entire structure. This article investigated the cyclic performance and behavioral improvement of shape-memory alloy-based connections (SMA-based connections). The novelty of the present work is focused on the effect of shape memory alloy bars is damage reduction, strain recoverability, and cracking distribution of the stated material in RC moment frames under seismic loads using 3D nonlinear static analyses. The present numerical study was verified using two experimental connections. Then, the performance of connections was studied using 14 models with different reinforcement details on a scale of 3:4. The response parameters under study included moment-rotation, secant stiffness, energy dissipation, strain of bar, and moment-curvature of the connection. The connections were simulated using LS-DYNA environment. The models with longitudinal SMA-based bars, as the main bars, could eliminate residual plastic rotations and thus reduce the demand for post-earthquake structural repairs. The flag-shaped stress-strain curve of SMA-based materials resulted in a very slight residual drift in such connections.

• Steel and Composite Structures
• /
• v.33 no.1
• /
• pp.1-18
• /
• 2019

In the present study, the behavior of steel plate shear walls (SPSW) with variable column flexural stiffness is experimentally and numerically investigated. Altogether six one-bay one-story specimens, three moment resisting frames (MRFs) and three SPSWs, were designed, fabricated and tested. Column flexural stiffness of the first specimen pair (one MRF and one SPSW) corresponded to the value required by the design codes, while for the second and third pair it was reduced by 18% and 36%, respectively. The quasi-static cyclic test result indicate that SPSW with reduced column flexural stiffness have satisfactory performance up to 4% story drift ratio, allow development of the tension field over the entire infill panel, and cause negligible column "pull-in" deformation which indicates that prescribed minimal column flexural stiffness value, according to AISC 341-10, might be conservative. In addition, finite element (FE) pushover simulations using shell elements were developed. Such FE models can predict SPSW cyclic behavior reasonably well and can be used to conduct numerical parametric analyses. It should be mentioned that these FE models were not able to reproduce column "pull-in" deformation indicating the need for further development of FE simulations with cyclic load introduction which will be part of another paper.

• Computers and Concrete
• /
• v.16 no.2
• /
• pp.287-309
• /
• 2015

FormWorks-Plus is a generalized public domain user-friendly preprocessor developed to facilitate the process of creating finite element models for structural analysis programs. The lack of a graphical user interface in most academic analysis programs forces users to input the structural model information into the standard text files, which is a time-consuming and error-prone process. FormWorks-Plus enables engineers to conveniently set up the finite element model in a graphical environment, eliminating the problems associated with conventional input text files and improving the user's perception of the application. In this paper, a brief overview of the FormWorks-Plus structure is presented, followed by a detailed explanation of the main features of the program. In addition, demonstration is made of the application of FormWorks-Plus in combination with VecTor programs, advanced nonlinear analysis tools for reinforced concrete structures. Finally, aspects relating to the modelling and analysis of three case studies are discussed: a reinforced concrete beam-column joint, a steel-concrete composite shear wall, and a SFRC shear panel. The unique mixed-type frame-membrane modelling procedure implemented in FormWorks-Plus can address the limitations associated with most frame type analyses.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.229-238
• /
• 2021

The article applies the ECM - ARDL model to examine the relationship between economic indicators and the existence of the disease in the long run of 10 ASEAN countries from 2000 to 2019. There are two models: The first model investigates the impact of GDP per capita, net inflow FDI, unemployment rate, and inflation rate on the proportion of export to GDP of ASEAN countries, the second model is similar to the first one but adds one more variable to the independent variable list - 'the variable for disease'. The results prove the long-run effect of GDP per capita, FDI, unemployment and inflation rate on export of the selected countries, though individual country shows differences in the sign and magnitude of these impacts. Surprisingly, the number of people suffering from disease does not affect the export of all selected countries as expected. The results of the two models also indicate that the disequilibrium in the short run converges to the equilibrium in the long run with a high proportion, especially in the case of Cambodia and the Philippines, with the rate of 95.65% and 151.94%, respectively. The findings can be useful for policymakers in promulgating efficient policies to enhance the trading activities of the selected countries.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.1
• /
• pp.7-13
• /
• 2021

Purpose: Unemployment in its general form is a result stemming from the decisions of workers to search for a new and better paying job. In this study, the view that unemployed workers were not simply desiring any job, but one that would maximize their expected future outcome, was examined. Research design, data, and methodology: In order for collection of data and analysis, the panel dates of individual applications for job openings on job search websites were utilized to examine search effort and period for individuals. Results: It was found that the number of applications sent by a job seeker declined over their period of job searching, and that job seekers over a long duration of time tend to send relatively more applications per week throughout their entire search period. The latter finding contradicts the implications of the standard labor search effort models. Conclusions: It can be observed that these job search models fail to capture several key elements in search efforts, and that the search time for an offer is not entirely predetermined by the labor market conditions and socio-economic (individual) characteristics of the searcher. It can be shortened as he or she intensifies their job search efforts.