• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.61-67
• /
• 2013

In this study, wave spectrum based fatigue analyses are studied for Turkey's adjacent coastal seas by using Maestro finite element analyzing software. Palmgren-Miner's method is used to obtain the fatigue safe life time. Palmgren-Miner's method was selected for the fatigue analyses because of its good acceptance of data from almost all classification societies such as Germanischer Lloyd, the American Bureau of Shipping, Det Norske Veritas, etc. The maximum stress regions of the structures are obtained by using finite element analyses, and the results are compared with the endurance limit of the W$\ddot{o}$hler diagram of AA5059 H321 aluminum alloy. The wave characteristics table given in this article is used to obtain the number of cycles for each sea condition. By using the wave characteristics table, the wave lengths, wave speeds, and cycles are obtained. This study is performed to estimate the lifetimes of a semi-swath type coast guard boat and/or commercial yacht projects, which are produced by using AA5059 H321 aluminum alloy, under different sea environment conditions. Fatigue examinations are performed for both head seas and oblique seas.

• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.572-578
• /
• 2007

Two stroke low speed diesel engines are widely used for marine propulsion or as power plant prime mover. These engines have many merits which includes higher thermal efficiency, mobility and durability. Yet various annoying vibrations occur sometimes in ships or at the plant itself. Of these vibrations, torsional vibration is very important and dictates a careful investigation during the engme's initial design stage for safe operation. With the rule and limit on torsional vibration in place, shaft strength fatigue due to torsional vibration however demands further analysis which possibly can be incorporated in the classification societies' rule and limit. In addition, the shaft's torsional vibration stresses can be calculated equivalently from accumulated fatigue cycles number due to transient torsional vibration in time domain. In this paper, authors suggest a new estimation method combined with Palmgren-Miner equation. A 6S70MC-C ($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study. Angular velocity was measured, instead of shaft's strain, for simplified measurement and it was converted to torsional vibration stress for accumulated fatigue cycle numbers in shafting life time. Likewise, the accumulated fatigue calculation was compared with shaft fatigue strength limit. This new method can be further realized and confirmed in ship with two stroke low speed diesel engine.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.573-580
• /
• 2007

본 논문은 선박용 엔진인 S60MC-C의 프레임 박스 용접부에 대한 피로수명 예측을 위한 수치적 기법을 제시한다. 피로 수명 평가를 위해 싸이클 동안의 동적인 응력변화를 계산해내야 하며, 이에 따라 선행된 연구에서 얻은 엔진의 한 싸이클 동안의 하중 조건으로 상용 유한요소해석 프로그램을 이용한 구조해석을 실시하였다. 구조해석은 8단계에 대해 이루어 졌으며, 그 결과를 바탕으로 프레임 박스 용접부의 피로수명 평가를 위해서 HSS(Hot spot stress), Reservoir counting method, Palmgren-miner's rule을 적용하였다. 결과적으로 구조해석을 통한 대상 엔진의 취약부와 과잉 설계부를 확인하였고, 피로수명의 평가를 통해 설계의 적절성 여부를 평가하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.786-791
• /
• 2006

Two stroke low speed diesel engines are mainly used for marine propulsion or power plant prime mover. These have many merits such as higher thermal efficiency, mobility and durability. However various annoying vibrations sometimes occur in ships or at the plant itself. Of these vibrations, torsional vibration is very important and it should be carefully investigated during the initial design stage for engine's safe operation. In this paper authors suggest a new estimation method of for shaft's can be calculated equivalently from accumulated fatigue cycles number due to torsional vibration. The 6S70MC-C($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study, and the accumulated fatigue cycles numbers for shafting life time converted from the measured angular velocity and torsional vibration stress was calculated. This new method can be realized and confirmed in test model ship with two stroke low speed diesel engine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.913-920
• /
• 1996

In this study, the counting method for multi-axial and multi-point load states was proposed. Using this counting method, the load spectrum is generated from the service load history which is measured for boom structure of excavator. Loading state for loading points of boom structure is described as a multi-dimensional state space. From this load spectrum, the stress spectrum was generated by FEM analysis using the superposition of the unit load. The cumulated damage at the severe damage point of In nm structure by the failure example is calculated by Palmgren-Miner's rule. As a result of this study, the fatigue life estimation using the multi-axial and multi-point load counting method is useful.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.129-136
• /
• 2018

대형 용접 구조물에 대한 피로설계 수명의 예측은 일반적으로 Palmgren Miner과 등가손상도 방법 또는 선형누적손상도 방법을 사용한다. 또한 용접 구조물에서 피로 균열이 발생되면 잔존 수명은 S-N 곡선과 선형 파괴역학에 기초하여 예측되고 있다. 본 연구에서는 면외거셋 용접이음의 3차원 피로균열 진전거동과 피로수명을 예측하기 위하여 피로 시험을 실시하였다. 면외거셋 용접이음의 3차원 피로균열진전해석은 NX NASTRAN 및 FRANC3D를 이용하여 유한요소 해석을 실시하였다. 면외거셋 용접이음의 균열 형상비, 초기균열 크기 및 응력비에 미치는 영향을 검토하기 위하여 피로균열진전 해석을 실시하였다. 또한 초기균열크기, 균열 형상비와 응력비의 변화에 따른 3차원 피로균열진전 해석 결과와 피로시험결과를 비교하였다. 피로균열진전 해석결과, 피로균열 진전속도와 응력확대계수와의 관계에서 피로시험과 유사하게 나타남을 확인하였으며, 면외거셋 용접이음의 피로수명을 추정할 수 있음을 확인하였다.

• 대한조선학회논문집
• /
• 제56권3호
• /
• pp.231-241
• /
• 2019

In this study, a simplified analysis method was developed to evaluate the fatigue damage of an ice-going ship under broken ice condition. The global ice load, which is essentially calculated at the design stage of the Arctic vessel, and the hull form information were used to estimate the local ice load acting on the outer-shell of the ship. The local ice load was applied to the finite element analysis model, and the Weibull parameters for the target fatigue point were derived. Finally, fatigue damage was evaluated by applying the S-N curve and the Palmgren-Miner rule. For the verification of the proposed method, numerical analyses using direct approach were performed for the same conditions. A numerical model that implements the interaction between ice and structure was introduced to verify the local ice load and the stress calculated from the proposed method. Finally, the fatigue analyses of the Baltic Sea for actual ice conditions were performed, and the results of the proposed method, the method using numerical analysis, and the LR method were compared.

• 한국강구조학회 논문집
• /
• 제29권1호
• /
• pp.49-60
• /
• 2017

부유식 구조물의 계류선의 설계는 강도뿐만 아니라 피로수명 측면에서도 검토가 반드시 요구된다. 일반적으로 계류선의 피로 설계에는 동적 응력을 야기하는 하중이 지배적인 영향을 미치게 된다. 즉, 파랑이 주요 설계 하중으로 고려가 된다. 본 연구에서는 불규칙 파랑에 대한 해중 터널 계류선의 피로 손상 특성에 대해 분석한다. 시간 이력 유체-구조 동역학 해석을 통해 특정 환경 하중에 대한 해중터널의 동적 운동 및 계류선에 발생하는 장력과 응력을 계산하고, Rainflow 집계법 및 Palmgren-Miner의 법칙 그리고 DNV 기준에서 제시하는 해양구조물 설계를 위한 S-N 곡선을 고려하여 단기 피로 손상을 추정한다. 해중 터널의 계류 형식과 유사한 계류 형식을 갖는 인장각 플랫폼의 텐던 설계를 참고하여 100년 재현 주기 파랑이 48시간 지속되는 조건을 가정하여 이 환경 하중에 의한 피로 손상도를 추정한다. 본 해석 절차를 따르며, 함체의 흘수와 계류선의 간격 및 초기 기울임 각도가 피로 손상도에 미치는 영향을 분석한다.

• 한국해양공학회지
• /
• 제28권3호
• /
• pp.185-192
• /
• 2014

The riser systems for floating offshore structures are known to experience tri-modal dynamic responses. These are owing to the combined loadings from the low-frequency response due to riser tension behavior, middle-range frequency response coming from winds and waves, and high-frequency response due to vortex induced-vibration. In this study, fatigue damage models were applied to predict the fatigue damages in a well-separated tri-modal spectrum, and the resultant fatigue damages of each model were compared with the most reasonable fatigue damage calculated by the inverse Fourier transform of the spectrum, rain-flow counting method, and Palmgren-Miner rule as a reference. The results show that the fatigue damage models developed for a wide-band spectrum are applicable to the tri-modal spectrum, and both the Benasciutti-Tovo and JB models could most accurately predict the fatigue damages of the tri-modal spectrum responses.