• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.2023-2027
• /
• 2006

Dibenzyl sulfide was oxidized at the a-carbon to yield benzaldehyde in the presence of $Pd(NO_3)_2$. Oxygen itself could not oxidize the sulfide directly, instead the nitrato ligand of the palladium complex transferred oxygen to dibenzyl sulfide to form benzaldehyde. The X-ray crystal structure of the intermediate complex, cis-[$Pd(NO_3)_2${$S(CH_2C_6H_5)_2$}$_2$], revealed that the nitrato ligand was unidentate. Para-substituted dibenzyl sulfides I, $(YC_6H_4CH_2)_2S $wherein Y = $OCH_3$, $CH_3$, Cl, CN, or $NO_2$, were synthesized and reacted with palladium nitrate, and those with electron-donating substituents (Y = $OCH_3$ and $CH_3$) were good substrates for the oxidation reaction with palladium nitrate. Thus, the reaction mechanism of the oxygen transfer was proposed to include nucleophilic benzylic carbon.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.27-28
• /
• 2006

• 공업화학
• /
• 제19권6호
• /
• pp.629-632
• /
• 2008

N-Arylation에 대한 경제적이고 실용적인 촉매시스템을 찾기 위하여 indole을 이용한 다양한 반응조건에서 실험이 수행되었으며, 결과적으로 본 연구에서 처음 시도한 copper nitrate와 copper cabonate가 다른 copper계 촉매나 palladium 촉매에 유사하거나 더 우수한 반응성을 보여주었다. Copper nitrate 촉매를 사용하는 경우에는 다양한 리간드 중에서 N,N'-dimethylethylenediamine 리간드가 더 효과적이었으며 copper cabonate 계에서는 ethylenediamine 리간드가 더 적합한 것으로 판명되었다.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.621-631
• /
• 2018

In this study, catalyst was made through incipient wetness method using palladium (Pd) as noble metal, indium (In) as secondary metal, and montmorillonite (MK10) and Al pillared montmorillonite (Al-MK10) as supporters. The nitrate reduction rate of the catalysts was measured by batch experiments where H2 gas was used as reducing agent and formic acid as pH controller. Transmission electron microscopy (TEM) equipped with energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were all used to determine the elemental distribution of Pd, In, Al, and Si on catalysts. It was observed that Al pillaring increased the Al/Si elemental composition ratio and point of zero charge of MK10, but decreased its BET specific surface area and pore volume. The nitrate reduction rate of Al-MK10 Pd/In was 2.0 ~ 2.5 times higher than that of MK10 Pd/In using artificial groundwater (GW) in ambient temperature and pressure. Nitrate reduction rates in GW were 1.2 ~ 1.7 times lower than those in distilled deionized water (DDW). Nitrate reduction rates in acidic conditions were higher than those in neutral condition in both GW and DDW. The amount of produced NH3-N over degraded NO3- at acid conditions was lower than that of neutral condition. Even though the leaching of Pd after reaction was measured in DDW it was not detected when both Al-MK10 Pd/In and MK10 Pd/In were used in GW. The modification of montmorillonite as a supporter significantly increased the reductive catalytic activities of nitrates. However, the ratio of producing ammonia by-products to degraded nitrates in ambient temperature and pressure was similar.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.37-41
• /
• 2004

A new tridentate ligand incorporating a monoxime and thiosemi-carbozone moieties has been synthesized. Its copper(II), nickel(II) and palladium(II) complexes have been prepared and characteirzed by physical and spectral methods. Elemental analyses and spectroscopic data of the metal complexes are consistent with the formation of a mononuclear copper(II) complex and binuclear complex with both nickel(II) and palladium(II). In the copper(II) complex the fourth coordination site is occupied by nitrate ion. In the binculear complexes the fourth coordination site is occupied by the deprotonated oxime oxygen of the ligand coordinated to the other metal.

• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.133-139
• /
• 2007

Nickel powder was coated with aluminum nitrate solution to increase the thermal stability of a porous nickel support and control the nickel content in the Pd-Cu-Ni ternary alloyed membrane. Raw nickel powder and alumina coated nickel powder were uniaxialy pressed by home made press with metal cylindrical mold. Though the used nickel powder prepared by pulsed wire evaporation (PWE) method has a good thermal stability, the porous nickel support was too much sintered and the pores of porous nickel support was plugged at high temperature (over $800^{\circ}C$) making it not suitable for the porous support of a palladium based composite membrane. In order to overcome this problem, the nickel powder was coated by alumina and alumina modified porous nickel support resists up to $1000^{\circ}C$ without pore destruction. Furthermore, the compositions of Pd-Cu-Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow could be controlled by not only Cu-reflow temperature but also alumina coating amount. SEM analysis and mercury porosimeter analysis evidenced that the alumina coated on the surface of nickel powder interrupted nickel sintering.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.176-179
• /
• 2003

The objective of this study was to investigate reductive dechlorination of aromatic hydrocarbons using zero valent metals (ZVMs) and catalysts as reactive materials for permeable reactive barriers (PRBs). A group of small aromatic hydrocarbons such as monochlorophenols, phenol, benzene were readily reduced with palladium catalyst and zero valent iron. Poly-aromatic hydrocarbons (PAHs) were also tested with the catalysts and zero valent metal combinations. The aromatic rings were reduced and partly reduced PAHs were found as the daughter compounds. Current preliminary study implicate that ZVMs and modified catalysts can be successfully applied for PRBs which currently applicable for halogenated organic compounds and some inorganic contaminants including chromium(Ⅵ) and nitrate.

• 분석과학
• /
• 제12권2호
• /
• pp.130-135
• /
• 1999

쌀분말시료중에 미량으로 존재하는 비소(As), 납(Pb), 셀레늄(Se)등을 분석하기 위하여 매질변형방법에 의한 흑연로원자흡수분광법을 이용하였다. 흑연로내에서 측정원소의 열안정성과 간섭매질의 휘발성을 증가시키기 위해 매질변형재로서 팔라듐과 질산마그네슘 혼합물을 사용하였다. 몇가지 금속원소(As, Cd, Cu, Pb, Se, Zn)에 대해 팔라듐과 질산마그네슘 혼합물에 의한 매질변형효과를 검토한 결과 As, Pb, Se에 대해 뚜렷한 회화 및 원자화 온도의 증가와 흡수도 상승효과를 확인 하였다. 마이크로파 산가압분해법에 의해 쌀분말시료를 분해하고 표준물첨가법에 의해 As, Pb, Se을 분석하였다. 바탕선 보정에는 Zeeman effect를 이용하였으며 특성농도는 건조시료기준 As 26 ng/g, Pb 18 ng/g, Se 24 ng/g이었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.270-273
• /
• 2006

In this study, ink-jet technology is applied to the emitter fabrication for surface-conduction electron-emitter display (SED). The general emiiter material of SED, palladium oxide (PdO), is prepared by calcination the mixture of solvent and precursors of platinum chlorine and platinum nitrate. With controlling the precursors and solvents, the PdO is formed below $400^{\circ}C$ which is required for SED process.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2650-2656
• /
• 2013

Mesoporous alumina was synthesized using bayberry tannin (BT) as template. This novel synthesis strategy was based on a precipitation method associated with aluminum nitrate as the source of aluminum in an aqueous system. $N_2$ adsorption/desorption, XRD, SEM and TEM were used to characterize the as-prepared mesoporous alumina. The results showed that the mesoporous alumina possessed crystalline pore wall, high specific surface area, narrow pore distribution and excellent thermal stability. Moreover, the surface area and pore size of the mesoporous alumina can be tuned by changing the experimental parameters. Further, the mesoporous alumina was investigated as the support of palladium catalyst ($Pd-Al_2O_3{^*}$) for the hydrogenation of propenyl, styrene and linoleic acid. For comparison, the reference catalyst ($Pd-Al_2O_3$) prepared without barberry tannin was also employed for the catalytic hydrogenation. The experimental results showed that $Pd-Al_2O_3{^*}$ exhibited the superior catalytic performance than $Pd-Al_2O_3$ for all the investigated substrates, especially for the hydrogenation of linoleic acid with larger molecular.