• 구강회복응용과학지
• /
• 제36권2호
• /
• pp.88-94
• /
• 2020

목적: 본 연구는 한국인에서 상악 전치의 치근 위치를 시상면에서 분석하고, 분류에 따른 빈도를 보고함으로써 즉시 식립 임플란트를 위한 방사선학적 자료를 수집하기 위함이다. 연구 재료 및 방법: 콘빔형 전산화단층영상(cone-beam CT)을 촬영한 환자 중 연구 기준에 적합한 120명(남성 60명, 여성 60명)을 대상으로 후향적 분석을 시행하였다. 축의 방향설정을 시행한 후에, 상악 전치부 치아와 치조골 사이의 관계에 대한 시상 치근 위치를 분석하였다. 치근이 치조골의 협측, 중앙, 구개측으로 위치한 경우 각각 Class I, II, III로 분류하였으며, 치근이 협측과 구개측 모두에서 피질골판에 2/3 이상 닿아있는 경우에는 Class IV로 하였다. 다음으로, 치아의 장축과 치조골의 장축 사이의 각도를 측정하였다. 기술적 분석 및 Kruskal-Wallis 분석을 시행하였으며, 치아의 위치 및 분류에 따른 시상각을 비교하였다. 결과: 상악 전치부의 시상 치근 위치에 대한 빈도분석 결과, Class I은 81.1%, Class II는 10.3%, Class III는 1.9%, 그리고 Class IV는 6.7%로 나타났다. 상악 전치부의 77.5%에서 시상각이 20도 이하로 나타났다. 그러나 견치의 경우, 42.7%에서 20도 이상의 시상각을 보였다. 분류에 따라서는 Class I (16.19)에서 Class II (8.72) 및 Class III (9.93)에 비해 통계학적으로 유의하게 높은 시상각을 보였으며, Class IV (3.79)에서 낮았다. 결론: 본 제한된 연구의 결과를 근거로, 상악 전치의 치근은 일반적으로 협측 치조골에 가깝게 위치하고 있으나, 일부 치아는 매우 얇은 치조골을 가지고 있으며, 30도 이상의 큰 시상각을 보였다. 따라서 적절한 치과 임플란트 치료 계획 수립을 위해 시상 치근 위치 및 시상각에 대한 cone-beam CT 분석이 필요할 것이다.

• Journal of Periodontal and Implant Science
• /
• 제31권1호
• /
• pp.257-269
• /
• 2001

Removal of subgingival calculus is essential for the success in periodontal treatment. Subgingival instrumentation is used for the removal of all bacterial plaque and calculus. In this study, Gracey curet and Ultrasonic curet were used on single rooted teeth to conduct subgingval scaling and root planning. The remaining amount of calculus was evaluated according to type of instrument, depth of pocket, and tooth surface. 24 teeth were extracted from 14 patients being treated at department Periodontology Seoul Advantist dental hospital were used. Total 96 area(4 surface per teeth) were evaluated. 12 teeth treated with Gracey curet were used as the control group and the other 12 teeth treated with Ultrasonic curet were examined for experimental group. The 4 surface of the teeth(buccal, mesial, lingual or palatal, distal) were observed through the stereomicroscope and the images of the surface were captured and saved in CCD. The images were displayed on the monitor and the amount of calculus remained was evaluated by overlapping $10{\times}10$ grid pixel screen produced by Microsoft power point. The results evaluated were as follows 1. There was no statistically significant difference in residual calculus and tooth position following scaling and root planning of all group, but statistically significant correlation with residual calculus, probing depth, instruments and tooth surface. 2. There was statistically significant correlation between residual calculus and probing depth, but no statistically significant difference in residual calculus, tooth surface and tooth position on experimental(Ultrasonic curet) group. 3. There was no statistically significant difference in residual calculus according to the pre-treatment pocket depth and tooth position, but statistically significant correlation with tooth surface. The amount of residual calculus increase with mesial, distal, buccal and lingual(or palatal) surface on control(Gracey curet) group. 4. The Gracey showed better results than ultrasonic curet in mesial and distal surface, and there is significant difference. The results demonstrate that ultrasonic curet alone is inadequate for thorough subgingival debridement and suggest that Ultrasonic curet with Gracey curet should be more effective.

• 대한치과교정학회지
• /
• 제31권1호
• /
• pp.97-105
• /
• 2001

교정 치료 시 많은 경우 상악 전치부를 상당량 견인하게 되며 이 때 치아의 이동량과 전방 피질골의 개조량이 동일하게 일어나지 않는다면 치주적인 문제가 발생할 수 있게 된다. 이에 본 연구에서는 상악 전치가 후방 견인될 때 치아의 이동량과 피질골의 개조량의 관계를 알아보기 위하여 성장이 완료된 만 18세 이상의 성인 여자환자 56명을 대상으로 치료 전후의 측모두부 방사선 사진을 계측하였다. 연구대상 56명은 전치의 후방견인 시 경사이동이 주로 일어난 환자(26명 )와 치체 이동이 동반된 환자(30명)로 나누었으며 치료 전후의 측모두부방사선 사진을 true horizontal plane 을 기준으로 하여 중첩하였다. Tip-Group(경사이동된 군)에서는 수평적인 bone remodeling/tooth movement ratio가 1:1.63, Torque-Group(치체 이동이 동반된 군)에서는 1:1.66이었다. 두 군 모두에서 치아의 이동량과 골의 개조량이 동일하지 않았기 때문에 경사 이동 시에는 치근첨이 구개측피질골판에서 멀어지고 순측피질골판에 가까워지며, 치체이동이 동반된 군에서는 치근이 순측피질골판에서는 멀어지고 구개측피질골판에 접근하게 된다. 따라서 상악의 전방 피질골의 두께가 매우 얇은 환자에서는 상악 전치의 후방견인량에 제한이 있게 되며 골격적 부조화가 심한 경우에는 악교정수술을 동반한 치료를 고려하고, 교정적 절충치료가 필요한 경우 술자는 그 치료한계를 명확히 인식해야할 것이다.

• 대한치과교정학회지
• /
• 제45권5호
• /
• pp.245-252
• /
• 2015

Objective: To assess the labial and lingual alveolar bone thickness in adults with maxillary central incisors of different inclination by cone-beam computed tomography (CBCT). Methods: Ninety maxillary central incisors from 45 patients were divided into three groups based on the maxillary central incisors to palatal plane angle; lingual-inclined, normal, and labial-inclined. Reformatted CBCT images were used to measure the labial and lingual alveolar bone thickness (ABT) at intervals corresponding to every 1/10 of the root length. The sum of labial ABT and lingual ABT at the level of the root apex was used to calculate the total ABT (TABT). The number of teeth exhibiting alveolar fenestration and dehiscence in each group was also tallied. One-way analysis of variance and Tukey's honestly significant difference test were applied for statistical analysis. Results: The labial ABT and TABT values at the root apex in the lingual-inclined group were significantly lower than in the other groups (p < 0.05). Lingual and labial ABT values were very low at the cervical level in the lingual-inclined and normal groups. There was a higher prevalence of alveolar fenestration in the lingual-inclined group. Conclusions: Lingual-inclined maxillary central incisors have less bone support at the level of the root apex and a greater frequency of alveolar bone defects than normal maxillary central incisors. The bone plate at the marginal level is also very thin.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• Journal of Periodontal and Implant Science
• /
• 제48권6호
• /
• pp.395-404
• /
• 2018

Purpose: The purpose of this study was to propose a technique for periodontal biotype modification through thickening of the entire facial aspect using a volume-stable collagen matrix and autogenous subepithelial connective tissue graft (CTG) for the treatment of gingival recession. Methods: Four systemically healthy patients showing Miller class I or class II gingival recession in the mandibular incisor area were included in this study. Full-mouth scaling and root planing procedures were performed at least 4 weeks prior to periodontal plastic surgery. A split-thickness flap with a horizontal intrasulcular incision and 2 vertical incisions was used in cases 1-3, and the modified tunnel technique was used in case 4 for coronal advancement of the mucogingival complex. After the exposed root surfaces were debrided thoroughly, double-layered volume-stable collagen matrix was placed on the apical part of the recession and a subepithelial CTG harvested from the palatal area was placed on the coronal part. The amount of root coverage at 3 months postoperatively was evaluated in cases 1-3, and facio-lingual volumetric changes were analyzed in cases 1 and 2. Results: Healing was uneventful in all 4 cases and complete root coverage was shown in cases 1-3. In case 4, reduction of gingival recession was observed at 3 months after surgery. In cases 1 and 2, a comparison of stereolithographic files from the preoperative and postoperative time points demonstrated that the entire facio-lingual volume had increased. Conclusions: The surgical technique suggested herein, using a volume-stable collagen matrix and autogenous subepithelial CTG, may be an effective method for periodontal biotype modification through thickening of the entire facial aspect for the treatment of gingival recession.

• 대한치과교정학회지
• /
• 제54권1호
• /
• pp.26-47
• /
• 2024

Objective: This systematic review aimed to evaluate the correlation between vitamin D levels and the rate of tooth movement, external apical root resorption, bone biomarker expression, and bone remodeling. Methods: Three databases (PubMed, Scopus, and Web of Science) were systematically searched from inception until 14th March 2023 to identify studies investigating the correlation between orthodontic tooth movement and vitamin D in animals and humans. The quality assessment was made in accordance with the Joanna Briggs Institute Critical Appraisal Checklist. Results: Overall, 519 records were identified, and 19 were selected for the qualitative synthesis. Eleven studies investigated the effect of local administration (injections in the periodontal ligament, to the gingiva distal to the teeth, or submucosae palatal area) and systemic administration (oral supplementation) of vitamin D on tooth movement, external apical root movement, pro-inflammatory cytokines, and bone remodeling factors. The remaining eight studies investigated the correlation between serum vitamin D levels and salivary vitamin D levels on bone turnover markers and tooth movement. Conclusions: The findings of this systematic review support that vitamin D3 local injections might increase the rate of tooth movement via the receptor activator of the nuclear factor-kB/osteoprotegerin axis. However, the non-uniform study designs and the different protocols and outcome methods make it challenging to draw reliable conclusions.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.727-733
• /
• 1997

Autotransplantation is a procedure which transplants teeth from the original position to other positions in the same individual. It is classified surgical reposition by intraalveolar autotransplantation and transalveolar autotransplantation. The prognosis for successful autotransplantation is dependent on a number of factors such as root development, surgical technique, patient's age, endodontic treatment, time and type of splinting, preservation of periodontal ligament and storage medium. The most important factor is preservation of periodontal ligament. The cause of the failure of transplantation include damage of the transplant during removal from deep palatal malposition, poor regeneration of the bone around the transplant and chronic periodontal infection. In case I, Impacted maxillary canine for which surgical exposure and orthodontic treatment was impossisle was transplanted. After 2 weeks, It showed periapical radiolucency and external root resorption. So, endodontic treatment was done. One year later, permanent filling was done with gutta percha. In case II, Transpositioned maxillary central incisor was transplanted after extraction of impacted mesiodens. Pulp vitality was maintained during 5 months without other clinical symptons.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.287-295
• /
• 2002

Statement of Problem. Endodontically treated teeth frequently required posts and cores to provide retention and resistance form for crowns. In spite of excellent mechanical properties of metal post and core, its metallic color can be detected through all ceramic restorations occasionally. To solve esthetic problems of metal post and core zirconia post system has been introduced recently. Purpose. The purpose of this study was to examine the fracture strength and mode of resin root analogs restored with zirconia, gold and titanium posts with resin, ceramic and metal cores after cementation with metal crowns. Materials and methods. To avoid the morphological variations of natural teeth, 40 root analogs were fabricated with composite resin. Forty resin root analogs were randomly assigned to four groups according to post and core materials: Group A: cast gold post and core and complete cast crowns, as control. Group B: titanium posts (Parapost, Coltent/Whaledent Inc., NJ, USA) and composite resin cores. Group C: zirconia posts (Cosmopost, Ivoclar AG, Schaan/Liechtenstein) and composite resin cores Group D: zirconia posts and heat-pressed ceramic cores (IPS Empress Cosmo Ingots, Ivoclar AG) After thermocycling ($5^{\circ}C{\sim}55^{\circ}C$, 30 sec.), cyclic loading was applied at 3mm below the incisal edge on the palatal surfaces at an angle of 135 degree to the long axis (2Hz, 50N, 50000cycles). Fracture strength was measured by universal testing machine (Instron, High Wycombe, UK) and fracture pattern of restored resin root analogs was also evaluated. Results and conclusion. Within the limitations of this study following results were drawn. 1. Resin root analogs restored with zirconia posts and composite resins demonstrated lowest fracture strength among tested groups. 2. There was no significant difference in the fracture strength between zirconia posts and heat pressed glass ceramic cores and cast gold posts and cores 3. The fracture strength of resin root analogs restored with titanium posts and composite resin cores was lower than that of gold posts and cores. 4. The deep oblique fracture lines were dominantly observed in root analogs restored with cast gold post and core and zirconia post and heat-pressed ceramic core groups.

• 한국임상수의학회지
• /
• 제39권1호
• /
• pp.23-27
• /
• 2022

An 11-year-old spayed female Maltese dog presented with mass in oral cavity. On conscious oral examination, the right maxillary canine tooth was not visible, and a lesion has been suspected of mass existed in canine tooth area. The adjacent maxillary first premolar was buried in the lesion, with a little part of the tooth exceptions. On radiographic examination, the canine tooth was buried horizontally in the lesion, and the root part was adjacent to the first premolar tooth. Extraction was performed for a treatment. When the lesion was incised, the canine tooth was horizontal with the concave surface facing the palatal, and formed double teeth by fusing with the premolar tooth at the roots parts of the teeth. This report described the double teeth in the dentigerous cyst rarely reported in dogs.