• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.2
• /
• pp.267-278
• /
• 1996

Steady, laminar, forced convection flow and heat transfer in the entrance region of an internally finned circular duct with a finite thermal conductivity has been analyzed numerically. The problem under investigation is a three-dimensional boundary layer problem, and is solved by employing a marching-type procedure which involves solution of a series of 2-dimensional elliptic problems in the cross-stream plane. Two types of inlet hydrodynamic conditions are considered : (a) uniform velocity flow and (b) fully developed flow. From the above inlet conditions, the effects of the fin height(h), fin number(N) and conductivity ratio($k_r$) on the flow and thermal characteristics are investigated. The numerical results show that the height and number of fins, and ratio of the solid to fluid thermal conductivity have pronounced effect on the solution. Considering pressure drop, optimized dimensionless fin height is 0.4.

• Korean Journal of Veterinary Research
• /
• v.48 no.3
• /
• pp.357-361
• /
• 2008

Although power analysis is of important tool of research, investigators in veterinary medicine are unaware of the concepts of the statistical power. Two types of error occur in classical hypothesis testing and, those errors should be avoided, if possible. Since power is highly dependent on the sample size, whenever declaring non-statistically significant result they should consider the potential for committing a Type II error in their studies, which refers to the probability of falsely stating that two treatments are equivalent despite true difference between them. Also, sample size determination is one of the most important tasks facing the researcher when planning a diagnostic study, and provides valuable information on the characteristics of a test performance. This type of analysis forms the basis for proper interpretation of test results. The aim of this article was to re-evaluate some selected studies on diagnostic test reported in the domestic veterinary publications to determine the power and necessary sample size for inequality testing to ensure the desired power. Power calculations were illustrated using real-life examples of comparison of a new test and a reference test for detecting antibodies of various animal diseases. Factors affecting to the power were also discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.747-754
• /
• 2010

The objective of this study is improve the technology by various testing devices for measuring degree of compaction. The methods for quality control for compaction are very various. But, normally the specifications have provided PBT(Plate Bearing Test) method when inspector tested quality control. In spite of the PBT has a few weak points to reduce process and cost. In order to improve quality control method, analyzed in-situ test results between PBT and other devices.(LWDT and Geogauge).

• Journal of The Korean Association For Science Education
• /
• v.21 no.5
• /
• pp.867-892
• /
• 2001

In both Korea and the U.S., science education leaders and specialists insist that there is a shortage of curricula to address the new national science education guidelines in support of reform. This paper addresses development of new curricula for science education reform in the hopes of facilitating further development of guideline-based curricula. We examine Korean and U.S. thematic-based (Korean Science Field Trip at Cultural Sites Program and U.S. Graduate Teaching Fellows in K-12 Education) and project-centered (Korean Teachers for Exciting Science and U.S. Foundational Approaches in Science Teaching Program) programs. Using the criteria of rationale for curriculum, content and scope, processes of implementation, and assessment strategies, we identify the curricular components that are common across four successful secondary science programs and determine which of these components address the national guidelines. Our findings indicate that common components of these four programs meet the expectations of the science guidelines being used to revamp science education in both countries. Therefore, these programs not only engage secondary students and teachers in practicing successful science education, but also lead to successful science education practices that can be incorporated in the future development of curriculum to support secondary science reform.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.52.3-53
• /
• 2017

Identification of gravitational wave (GW) sources in electromagnetic (EM) wave observations is important because it enables us to understand the property of the GW-emitting sources/mechanisms much better than the GW detection. For that reason, a large number of astronomers are working on observations to identify the position and the nature of GW sources. We give a short overview of the expected EM signals from GW sources and the current EM follow-up observations that have been undertaken in Korea and the world.

• Journal of Korea Foundry Society
• /
• v.10 no.3
• /
• pp.219-224
• /
• 1990

In this, we have investigated the solute behavior in front of solid-liquid interface according to the change of the cooling rate in bronze alloy and phosphor bronze alloy. The conclusive summary is as follows: 1) The secondary dendrite arm spacing was decreased with increasing the cooling rate. 2) The minimum solute concentration happened to along centerline of primary arm, and the maximum solute concentration was found at the boundary of arm or between the arms the minimum solute concentration was increased with the cooling rate. 3) Segregation Index S was decreased with increasing the cooling rate and content of P. 4) The degree of the microsegregation was decreased with increasing the cooling rate. The effective distribution coefficient, Ke was increased with addition of P in Cu-Sn.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2212-2230
• /
• 2014

Cognitive radio (CR) users, known as secondary users (SUs), should avoid interference with primary users (PUs) who own the licensed band, while trying to access it; when the licensed band is unused by the PUs. To detect PUs, spectrum sensing should be performed over in-band channels that are currently in use by SUs. If PUs return to access the band, SUs need to vacate it, disrupting the SUs' communication unless a non-utilized band is discovered. Obtaining a non-utilized band in a short period facilitate seamless communication for SUs and avoid interference on PUs by vacating from the channel immediately. Searching for a non-utilized band can be done through proactive out-of-band (OB) sensing. In this paper, we suggest a proactive OB sensing scheme that minimizes the time required to discover a non-utilized spectrum in order to continue communication. Although, the duration spent on OB sensing reduces the throughput of the CR networks that can be achieved on band being utilized, the lost throughput can be compensated in the new discovered band. We demonstrate that, the effect of our proposed scheme on the throughput owing to OB sensing is insignificant, while exhibiting a very short channel discovery time.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.39.1-39.1
• /
• 2010

We are developing a CCD camera named CQUEAN (Camera for Quasars in Early Universe) to search for quasars at z > 7. CQUEAN has a 1024*1024 deep depletion CCD chip and will be attached to 2.1m Otto-Struve Telescope at McDonald Observatory, USA. Although commercial software for the CCD camera is provided by the vendor, we are going to develop our own software to control the other instruments as well, to carry out efficient observation. There are four major parts in our software: Instrument control part controls the camera and filter wheel to obtain imaging data. Quick look window is to display acquired imaging data for quick inspection. Telescope control part interfaces with Telescope Control System (TCS) to move the telescope and to get time or coordinate information. Finally, Observation scripting facility part carries out a series of short exposures in a batch. The whole software will be written in python on linux platform, using the instrument control software libraries provided by the vendors.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.62.1-62.1
• /
• 2010

CQUEAN (Camera for QUasars in EArly uNiverse) is an optical CCD camera system that consists of a science CCD camera, a guide CCD camera, and seven filters. In addition, a focal reducer is installed in front of the science camera to secure a larger field of view for the system. Engineering run of the system was carried out from Aug. 10, 2010 to Aug. 17, 2010, with 2.1m Otto Struve telescope at McDonald Observatory, USA, from which we investigated the characteristics and performance of the system. Bias and dark images were taken under various temperature conditions to examine the system behavior, and both twilight and dome flat images were obtained to investigate the appropriate preprocessing procedures of the data. Crude initial estimate indicated one hour integration would reach limiting magnitude of 24.2 in i-band with S/N ratio of 5, with CQUEAN at 2.1m telescope. The detailed results of the engineering run will be presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.61.2-61.2
• /
• 2010

CQUEAN (Camera for Quasars in EArly uNiverse) is an optical CCD camera system which has its own auto-guiding system. Guiding system consists of a 1k*1k CCD camera, FLI PL1001E, a flat mirror to feed the image of an off-axis field to the camera and baffle. The whole system lies on a moving arm which rotates 90 degree effectively to enlarge the field of view. A motor, IMS MDRIVE 34, and a differential decelerator, APEX AD140-050, are used for the moving mechanism. Auto-guiding is controlled by Agdr program. We had a first light from Aug. 10 to Aug 17, 2010 at McDonald Observatory, USA. In this presentation, we describe about the auto-guiding system for CQUEAN and its performance on the 2.1m telescope.