• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.65-72
• /
• 2007

The VOC (volatile organic compound) analyzer is devised to measure the four main aromatic hydrocarbon gases: toluene, ethylbenzene, xylene and styfene. It is not affected by ambient temperature and humidity. In addition, standby and measuring time of VOC Analyzer is a short as below 30 min and 8 min, respectively. Since the semiconductor gas sensor is supersensitive to gas components, it is not necessary to use a conventional gas concentrator or other complicated equipment. In this study, VOC emission behavior from 4 types paints (lacquer, urethane vanish, water-base paint, enamel paint) for wood-based panel was investigated using VOC Analyzer. After a specimen was spreaded on aluminum foil ($6.32{\times}6.32cm$) in $3{\ell}$ polyester bag, after 24 hours we could measure maximum VOC emission level that is a stabilized VOC value. Xylene of VOCs was high emitted from lacquer, urethane vanish and water-based paint, and TVOC (Toluene + Ethylbenzene + Xylene + Styrene) of lacquer was the highest emission concentration than another.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.371-380
• /
• 2017

To investigate the pigments used in modern and contemporary oil paintings, thirty-two paintings by Jiho Oh and Bonung Gu were selected. The white pigment found in the ground and painting layers was identified as lead white (hydrocerussite), zinc white (zinc oxide), titanium white (titanium dioxide in anatase or rutile forms), calcite (calcium carbonate), and barite (barium sulfate). Further, this indicated that pigments differ according to the artist and date of the painting's creation. However, both Oh and Gu used zinc white during the modern and contemporary period, while lead white was replaced by titanium white, barite and calcite. Compared with the overseas studies on pigments and oil paints, the change patterns of pigments were the same with them but the periods of the use were partially different. It seems to be due to the fact that South Korea is linked to the historical background of the art material which was imported from Japan instead of Western countries. Therefore, it is inevitable that any change in the white pigments used for domestic oil paintings occurred at a different time from global transitions. If the results of this study are used in the analysis of art works it is suggested that a database recording such aspects as material properties of oil paints, artistic techniques, and chronology would become important for future conservation science and the study of art history.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.501-505
• /
• 2017

Due to the rapid urbanization and increased population, there is an increase in airtight nature of buildings which causes serious indoor air pollution. Among several indoor air pollutants, volatile organic compounds (VOCs) emitted from paint are of major concern. Therefore, there is an urge for the development of environmental friendly paint products. In this wok, a natural wall paint (NWP) was prepared by utilizing a natural clay material "sericite" as a main component. A small chamber test was carried out to identify the toxic substances release from NWP and the results were compared with two eco-friendly commercial paints. The total VOCs were detected in trace level inside the test chamber and their concentrations were below the recommended indoor air quality standards. Toluene was not detected for NWP, whereas formaldehyde was observed in trace level. The toxicity index results were compared with two commercial paints and found that NWP exhibited less harmful gas emission. Based on certification rating of building materials, NWP can be classified as the first grade of building materials. Due to the above advantages, the use of sericite as a major component in NWP will be a useful technique to maintain the indoor air quality.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.634-646
• /
• 2016

In this work, modified epoxy resins which were well melted in mild solvent were synthesized and solubility assessment was carried out for synthesized epoxy resins. Bisphenol-A type, phenol novolac type and ortho-cresol novolac type epoxy resins were used and fatty acid, dodecyl phenol (DP) and toluene diisocyanate (TDI) were added for synthesis of modified epoxy resins containing fatty acid (MEFA). Composition was epoxy resin/fatty acid = 1.0/0.5 and fatty acid/DP = 0.25/0.25 by equivalent weight and twelve MEFAs were synthesized according to epoxy resins. Viscosity and solubility were measured for twelve MEFAs. As a result, solubility of MEFA was excellent for mild solvent according to increasement of contents of benzene ring, glycidyl group and carbon number of alkyl group. And physical properties were measured for each coating of paints after preparing transparent paints of MEFA to melt well in mild solvent among twelve MEFAs. As a result, they showed an optimal performance on conditions of equivalent ratio of bisphenol-A type epoxy resin/fatty acid/DP/TDI; 1.0/0.25/0.25/0.5 and equivalent ratio of phenol novolac type epoxy resin/fatty acid/DP; 1.0/0.25/0.25 for drying time, adhesion, hardness, impact resistance and alkali resistance.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.5
• /
• pp.311-318
• /
• 2012

This study investigated the flame retardant performance of developed four types of flame retardant chemicals (FRC), FRC-A, B, C and D. Four kinds of soft wood species, Sugi (Cryptomeria), Spruce (Picea abies), Hinoki (Chamaecyparis obtusa) and Korean pine (Pinus koraiensis), were used. The wood specimens were treated by spreading the FRC on the surface with different quantities, 30, 50, 70, 90, 110 g/$m^2$, respectively. The charred area, charred length, after flame time and after glow time were tested. And their suitabilities as incombustible materials were evaluated. The specimen treated by FRC-D showed better incombustible properties than others, even though with lower quantity. Therefore it is supposed that the FRC-D could be able to be applied on the cultural heritage, such as Korean wooden house for preventing fire.

• Corrosion Science and Technology
• /
• v.5 no.2
• /
• pp.69-76
• /
• 2006

Premature cracking of the epoxy coatings applied on ship's ballast tanks(BT) can lead to damage of ship's hulls. To avoid this, it's important to have clear understanding of the underlying mechanism and primary factors of the coating crack. In this study, the efforts were made to clarify the integrated effects of main factors, i.e., initial coating shrinkage, thermally induced strain, steel-structural strain and the intrinsic coating flexibility at the initial and after aging, to the early cracking phenomena of epoxy coating in the ship's ballast tank. The coating crack is caused by combination of thermal stress, structural stress, and internal stresses which is closely related to chemical structures of the coatings. On the other hand, thermal stresses and dimensional stabilities would rarely play a major role in coating crack for ballast tank coatings with rather large flexibility. Crack resistance of the coatings at early stages can be estimated roughly by measuring internal stress, FT-IR and $T_g$ value of the coatings. A new screening test method was also proposed in this study, which can be possibly related to the long-term resistance of epoxy-based paints to cracking.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.1
• /
• pp.61-72
• /
• 2011

As the customer's needs for diverse colors, the process of bus painting shop is becoming more and more complex. In particular, frequent changes of paint colors in each spray process require the cleaning of the painting nozzles and setting them up for the new paints, which results in increased time and cost and reduced production. This also increases environmental influences. This paper proposes, as a solution to this issue, the use of color selection field (CSF). CSF is physically a system of conveyors that are used to rearrange objects in a flow line. CSF is proposed, in this paper, to be introduced right before the spray process so that buses are better grouped according to their desired colors. Various parameters of the CSF, such as the number of conveyors and algorithms to determine the rearranged sequence of buses, have been determined by running simulations using the digital manufacturing technology, and investigating the simulation results. As an outcome of the proposed solution, the CSF system is expected to reduce approximately 30% of the nozzle cleaning cost for a Korean motor company case, which will not only benefit the company economically, but will also benefit the environment.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.47-52
• /
• 2009

Lime paint surpassing others in execution efficiency, anti-bacterial, anti-mold and small quantity emission of VOCs(Volatile Organic Compounds) characteristics was developed using a limestone as raw materials. The lime paint prepared by mixing slaked lime($37{\sim}40\;wt%$), PVA:EVA(9 wt%:1 wt%), talc(23 wt%), $TiO_2$(14 wt%), zeolite (3 wt%), antifoaming agent(5 wt%), wetting agent (5 wt%) was indicated over 99.8% of anti-bacterial and anti-mold characteristics. Also, the environment-friendly function of the lime paint was confirmed by detection of small amount of TVOCs($0.01\;mg/m^2h$) and formaldehyde($0.008\;mg/m^2h$). Execution efficiency, economy-and environment-friendly characteristics of this lime paint can make up for defects of established paints. And, it also presents the advantage of a limestone as high value added materials.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.753-762
• /
• 2003

Butyltin compounds (BTs), namely tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT), were measured in surface sediments collected in 2001 inside Hallim Harbor where a lot of shipping occurs as one of major harbors of Jeju Island, in order to evaluate their distribution. BTs were detected in surface sediments of all stations and their concentrations were comparable to those in surface sediments of other sites of domestic and foreign countries. The main species among BTs was MBT, although there was a little difference with a survey site. No correlations were obtained between organic matter or particles size of surface sediments and total BTs, indicating that these factors did not affect on the distribution of BTs. It was estimated that more complex factors including BTs loads and surrounding sedimentary environments, affected on the distribution of BTs. The high correlations between BTs indicated that DBT and MBT were mainly degraded from TBT based on antifouling paints of vessel etc. and other sources, such as DBT and MBT, could be ignored. The butyltin degradation indexes ([DBT] + [MBT]/[TBT]) Ivere in the range of 1.5∼3.3 (mean 2.5), indicating that the parent compound, TBT, were inflowed into the surface sediments a long years ago and degraded.

• Journal of Environmental Science International
• /
• v.20 no.5
• /
• pp.655-665
• /
• 2011

Contamination of butyltin compounds (BTs), namely tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT), was evaluated in sediments collected inside Jeju Harbor in 2001. The concentrations of BTs in surface sediments were comparable to those in other sites of domestic and foreign countries. The high correlations between BTs in surface ($r^2$ = 0.83~0.91) and core ($r^2$ = 0.70~0.79) sediments and the significant correlations between BTs concentrations and the number of incoming and outgoing vessels indicated that DBT and MBT were mainly degraded from TBT based on antifouling paints of vessels etc. and other sources, such as DBT and MBT, could be ignored. The butyltin degradation indices ([DBT] + [MBT]/[TBT]) in surface sediments were in the range of 2.2~3.6 (mean 2.7), indicating that the parent compound, TBT, was inflowed into the surface sediments a long ago, degraded and deposited. The sedimentation age of BTs contaminated core sediments could not estimated because the content of $^{210}Pb$ activity was nearly all the same and so the sedimentation rate could not obtained.