• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.93-93
• /
• 2012

섬유산업은 그 제조 스트림이 높은 오염 부하와 에너지 다소비를 특징으로 하여 환경규제에 따라 기존 시장의 위축 가능성이 상존하고 있다. 특히 섬유산업의 주요 스트림 중의 하나인 염색가공 공정은 섬유에서 불순물을 제거하고 심미한 색상과 사용 목적에 적합한 성능을 부여하는 단계로 섬유제조 공정에서 가장 높은 부가가치를 부여하는 단계이나 고온의 물과 다양한 화공약품을 많이 사용하고 그 처리온도가 비교적 높아($100^{\circ}C$ 이상) 대표적인 폐수 발생 공정이자 에너지 다소비 공정이다. 섬유의 염색 방법 중 반연속방법인 CPB(Cold Pad Batch)염색은 반응성 염료와 알칼리의 혼합액으로 구성된 염액에 원단을 패딩한 후 상온에서 수 시간 배칭하고 수세 및 후처리하여 염색하는 방법으로 작업공정관리, 설비관리가 간편하고 에너지소비량 절감, 높은 생산성의 장점이 있다. CPB염색법은 주로 직물에 적용되어 보편화 되었으며, 작업공정 중 장력의 영향을 많이 받는 니트 소재에 적용되는 사례는 드물다. 직물류의 CPB 염색가공법은 대구 경북을 중심으로 연구진행이 활발히 이루어지고 있어 국내 100대 정도의 CPB 관련 장비가 직물제품에 한정되어 가동되고 있는 반면, 니트 CPB 관련 염색 가공 업체는 1곳에 불과한 실정이나 니트류에 대한 지속적인 수요 증가를 고려하면 니트 소재에 대한 CPB염색 적용은 시의적절한 필수요소라고 판단된다. 니트 소재에 대한 CPB염색가공 적용 시 나타나는 문제점은 작업원단의 변부 말림현상 발생, 전폭 상태에서의 색상차이인 listing현상, 원단의 첫도입부분과 끝부분의 색상차이인 tailing현상이며, 반복되는 작업 시 염색재현성을 확보하는 것으로 나타난다. 본 연구에서는 CPB염색 시 CPB Head 장치의 Padding 방식 즉, trough와 Nip type에 따른 염색 시 알칼리와 염료 투입에 따른 염색 재현성(Build up, Ending, 알칼리 안정성)을 비교해 보았으며, 이에 따른 염색제품의 물성 및 견뢰도를 확인하여 보다 효율적인 방식을 선별하였다.

• Journal of Embryo Transfer
• /
• v.26 no.2
• /
• pp.141-145
• /
• 2011

Seven male Himalayan tahrs were strongly assumed to have accidently fed on foreign bodies in 2007. At the time, zoo caretakers witnessed missing fence padding, such as carpet, plastic awning, and ropes. The incident occurred the morning after the items had been set up to protect indigenous, wild long-tailed gorals from self injury caused by head butting the steel fence. Adult male Himalayan tahrs were obviously suspected of mostly eating the paddings mainly composed of carpet, thin and long plastic awning, and ropes. Even though they had not shown digestive problems, surgery was determined necessary in order to remove any indigestible foreign bodies. Left flank rumenotomy was conducted on seven male Himalayan tahrs from April to May, 2011. After anesthesia with xylazine, rumenotomy was performed on a concrete floor, with legs and head secured by ropes. No access to water and hay prior to operation for two days was needed to make the surgical procedure done quickly. Two sheets of small hand towels protecting against inflow of ruminal contents were beneficial during surgery. Antibiotics were administered intramuscularly for seven days. No abscesses at the surgical site were found after surgery. Like domestic ruminants, wild ruminants also ingest metalic or non-metalic, indigestible foreign bodies by accident. Therefore, simplified rumenotomy must be developed to apply to those wild animals to lengthen their longevity and to advance the quality of life in captivity. This case report is the first showing how to perform rumenotomy of Himalayan tahr, a wild ruminant, in Korea.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.227-233
• /
• 2018

The purpose of this study was to develop a warm cover for greenhouse with excellent thermal insulation and to propose ways of commercialization of the product. Feathers were used as filling materials because they formed the air layer to enhance insulation. Instead of downs for clothing or other textile products, we used disposed feathers. The developed product covers the outside of the greenhouse to keep the crops warm. It has multiple layers including feathers as filling materials, padding, inside fabric, heat insulation materials and outer fabric. It has proven to improve the insulation ratio. We developed other kinds of warm covers that are applicable to the inside of the greenhouse or the small houses in the greenhouse. Also, R&D system of educational industrial complex enables us to commercialize the products and building marketing strategies for them. This technology contributes to the expansion of energy-saving facilities for farmers, and it can serve the development and spread of various products utilizing feather.

• The Research Journal of the Costume Culture
• /
• v.21 no.1
• /
• pp.81-92
• /
• 2013

Many women feel pain in their breasts while running due to an excessively large degree of breast movement. Therefore, most sports bras pursue a reduction in breast movement. The purpose of this study is to investigate the breast movement reduction effect of a selection of sports bra designs according to the intensity of the sport and the breast size of the wearer. The study measured differences in the vertical movement of the nipple with 4 types of sports bras and 3 exercise speeds(4km/h, 7km/h, and 10km/h). Subjects included women in their 20s with bra sizes of either B cup(n=3) or C cup(n=3). The results of the study are as follows. Breast movement differed according to running speed and breast size; breast movement significantly increased starting with jogging speed(7km/h), and the C-cup group had a larger degree of vertical movement than the B-cup group. A superior effect on breast movement during jogging(7km/h) and sprinting(10km/h) was observed differently by bra cup sizes. To C-cup group, encapsulation-style sports bra, which provides horizontal support across the upper breast and padding inside the shoulder strap and bra cup to ease impact was most effective and next effective style was the compression-style bra with a princess line to cover the breasts solidly. Most style sports bra were effective in the B-cup group. Besides aforementioned encapsulation-style sports bra, the compression-style bra with a band, which presses the breasts against the chest wall, reduced breast movement effectively.

• Journal of Korean Foot and Ankle Society
• /
• v.3 no.1
• /
• pp.40-48
• /
• 1999

The neck of the talus is its most vulnerable and fragile segment, because of narrow diameter, devoid of hyaline padding and honeycombed internally by vascular channels etc. Talar neck fractures comprise 50% of all major to the talus. The majority occurs as a result of high-energy injuries, such as motor vehicle accidents or fall from a height. Anatomically, talar surface is covered mainly with articular cartilage and blood supply to the talus is very poor. So, complications, such as non-union, avascular necrosis and post traumatic arthritis, are frequent. The authors reviewed fourteen cases of talar neck fractures treated in our clinics from Jan. 1992 to Mar. 1997, and average follow-up period was over 15 months. The results obtained were as follows; 1. Patients' average age was 31.2 years. 2. The most common cause was traffic accident(9/14, 64%), and hyperdorsiflexion injury of the ankle was common mechanism of the fractures. 3. According to the modified Hawkins classification, type I was four cases, type II was nine cases, type III was one case and type IV was no case. 4. Hawkins sign of subcortical radiolucency was found in 64% (9/14) of the fractures. 5. Avascular necrosis was occurred in 21% (3/14) of the fractures(in two cases of type II fractures, and in one of type III). 6. According to the Hawkins criteria, four cases in type I, five in type II were an excellent result. Two cases, one in type II and one in type III were good result, and two in type II were fair. One in type II was poor result.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.182-187
• /
• 2003

Low molecular weight copolymers of maleic anhydride and vinyl acetate were prepared to develop formaldehyde free cross-linking agents. Since lower molecular weight is favorable for efficient penetration of the finishing agent into the cotton fibers in the padding process, the concentration of the initiator, chain transfer agent and the monomer ratios were varied to obtain copolymers of low molecular weights. The prepared polymers were characterized by GPC, $^1{H-NMR}$, FTIR, DSC and TGA. Copolymers of molecular weights of 2 000 to 10 000 were obtained and it was found that the most efficient method of controlling the molecular weight was by varying the monomer ratios. Poly(maleic anhydride-co-vinyl acetate) did not dissolve in water, but the maleic anhydride residue hydrolyzed within a few minutes to form poly(maleic acid-co-vinyl acetate) and dissolved in water. However, the maleic acid units undergo dehydration to form anhydride groups on heating above ${160}^{\circ}C$ to some extent even in the absence of catalysts. The possibility of using the copolymers as durable press finishing agent for cotton fabric was investigated. Lower molecular weight poly(maleic anhydride-co-vinyl acetate) copolymers were more efficient in introducing crease resistance, which appears to be due to the more efficient penetration of the cross-linking agent into cotton fabrics. The wrinkle recovery angles of cotton fabrics treated with poly(maleic anhydride-co-vinyl acetate) copolymers were slightly lower than those treated with DMDHEU and were higher when higher curing temperatures or higher concentrations of copolymer were used, and when catalyst, $NaH_2$$PO_2$, was added. The strength retention of the poly(maleic anhydride-co-vinyl acetate) treated cotton fabrics was excellent.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.36-41
• /
• 2015

The Monte Carlo based dose calculation program for stereotactic body radiotherapy was developed in this study. The Geant4 toolkit widely used in the radiotherapy was used for this study. The photon energy spectrum of the medical linac studied in the previous research was applied for the patient dose calculations. The geometry of the radiation fields defined by multi-leaf collimators were taken into account in the PrimaryGeneratorAction class of the Geant4 code. The total of 8 fields were demonstrated in the patient dose calculations, where rotation matrix as a function of gantry angle was used for the determination of the source positions. The DicomHandler class converted the binary file format of the DICOM data containing the matrix number, pixel size, endian type, HU number, bit size, padding value and high bits order to the ASCII file format. The patient phantom was constructed using the converted ASCII file. The EGSnrc code was used to compare the calculation efficiency of the material data.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.1-16
• /
• 2003

Nowadays, retro to the past fashion is appeared just as often as new challenge and trial. The style of Renaissance Era is the most often revival theme for contemporary fashion. So, this study was focused on 16C of Renaissance costume. It is investigated the characteristics of Renaissance costume through referring the literature to be able to restore the past costume as through as possible with the object of building database for developing new design. This study is done in two different ways at the same time, direct study to restore and indirect study to refer. Direct one is of the past costume as thoroughas possible based on referring to the originals. The other is referring the costume historical literature The costumes to restore is chosen among 16C famous pictures on the basis of how much they can show the typical chracteristics of 16C costume. Materials including textiles and ornaments which are necessarily to restore were shopped in Dongdeamoon Market. Some materials had a problem to get exactly the same one in Seoul on 21C. After visiting imes, the materials is chosen as similar as originals. Three sets of costume were restored on the basis of referring "Pattern of Fashion" written by Janet Arnold. The costumes were restored by reinforcing bodice based on the size of waist and in every three works. The way of sewing is based on hand sewing for details and machin-sewing for seam. Quilting intl lining is uwed giving the fabric stiffness to maintain the form from the heavy padding. Also the part of piles on margins is used darts instead of gather, because of reducing bulkiness of seam. General closing methods are hook and eyes, and lacing with points.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2017

A string wallcovering is a kind of textile wallcovering which is made of cellulose fiber yarn laminated on base paper. Compared with normal paper or PVC wallpaper, a string wallcovering is preferred continually in the interior design market, as it is not only environmentally friendly but it also has less cost on mass production without the weaving process and has a natural visual effect, excellent functionality such as thermo keeping, permeability, sound absorption. However, in the dyeing process, it is not appropriate to use plenty of energy such as water, electricity, steam or chemicals considering the environmental trend and the government policy plenty of energy such as water, electricity, steam or chemicals. Currently, a string wallcovering is made of raw white yarn and padding with direct dye or pigment which includes toxic elements, especially the use of direct dye is restricted in a part of the developed country due to inclusion of azo. In this study, we researched dyeing based on cold pad batch dyeing of a string wallcovering with reactive dyestuff. The peel strength and bending depth test confirmed that the optimum adhesive type and spread amount improved the water resistance of the string wallcovering. Also, pad batch dyeing with optimum reactive dyestuff enhanced the color fastness to light and rubbing in dry and wet conditions. Additionally, for improvement of color fastness to rubbing in a wet condition, the additional treatment finishing without soaping process which is used water. The results of this study can be used as basic data for environmentally friendly and energy saving of the textile wallcovering.