• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.939-942
• /
• 1997

In chemical mechanical polishing(CMP) there are many factors affecting the results. Temperature is one of the factors and it affects the removal rate. That is, the higher it arise, the more the material is removed. But the detailed temperature behavior is not discovered. In this study, we discover the distribution of temperature across the pad where the wafer has just been polished. And then we reveal the cause of the result in connection with the mechanical structure. In addition, we also discover the relationship of the friction force and normal force. With the result of two forces, we get the friction coefficient and obtain the contact model of the wafer and pad.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.117-122
• /
• 1999

Track rubber parts has heat built-up as long as dynamic loading is applied from running tracked vehicles. Durability is required for rubber part to sustain the heat accumulation and heat exchange between rubber-metal assembly and environmental air and ground. For this research, the track assembly was divided into four parts i.e., bottom track shoe, upper track pad, pin busing and metal structure. Three rubber parts and metal structure were modelled and analyzed with MARC package program to obtain time-temperature data which was induced form mechanical work of tracked vehicles. heat accumulation data was obtained from special experiments under the room temperature of 25$^{\circ}C\;and\;35^{\circ}C$ to simulate the actual environmental conditions. From this research, it is cleared that the environmental temperature does not affect to the heat accumulation speed in rubber parts. Also, the heat built-up mechanism was clarified from the thermo-mechanical work based on numerical analysis and experiments.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.930-936
• /
• 2008

This paper studies the effect of pad at initial stage and wear during braking on the dynamic contact pressure distribution. Wear is influenced by variable factor (contact pressure, sliding speed, radius, temperature) during dynamic braking and variation in contact pressure distribution. Many researchers have conducted complex eigenvalue analysis considering wear characteristic with Lim and Ashby wear map. The conventional analysis method is assumed the pad has smooth and flat surfaces. The purpose of this paper is to validate that wear rate induced by braking is considered for the precise squeal prediction. After obtaining pad wear from experiment, it is incorporated with FE model of brake system. Finally, the comparisons in fugitive nature of squeal will be carried out between the complex eigenvalue analysis and noise dynamometer experiment.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.167-174
• /
• 2004

A sorption cool pad brings cooling effect without any pre-cooling, nor any external energy supply. It uses evaporative cooling effect stimulated by the desiccative sorption. In this paper, heat and mass transfer in the sorption cool pad are investigated theoretically. The evaporative cooling process caused by the desiccant is modeled and analyzed considering the sorption characteristics of the desiccant. Two nondimensional parameters are found to dominate the cooling process： one is related to the psychrometric characteristics and the other is to the sorption capacity of the desiccant. The former decides the time to reach the lowest temperature and the later controls the time duration of the cooling effect being sustained.

• ETRI Journal
• /
• 제35권2호
• /
• pp.340-343
• /
• 2013

A novel bumping process using solder bump maker is developed for the maskless low-volume solder on pad (SoP) technology of fine-pitch flip chip bonding. The process includes two main steps: one is the aggregation of powdered solder on the metal pads on a substrate via an increase in temperature, and the other is the reflow of the deposited powder to form a low-volume SoP. Since the surface tension that exists when the solder is below its melting point is the major driving force of the solder deposit, only a small quantity of powdered solder adjacent to the pads can join the aggregation process to obtain a uniform, low-volume SoP array on the substrate, regardless of the pad configurations. Through this process, an SoP array on an organic substrate with a pitch of $130{\mu}m$ is successfully formed.

• 한국가금학회지
• /
• 제51권2호
• /
• pp.57-63
• /
• 2024

전세계적인 기후변화로 인해 국내 평균기온과 여름철 폭염 강도가 심화되면서 고온스트레스로 인가축 피해를 완화하기 위한 사양 전략이 필요한 상황이다. 국내육계사의경우 터널식 환기계사나 쿨링패드 등 시설을 설치하여 여름철 실내온도를 저감하고 있다. 그러나 쿨링패드의 경우 계사내부의 습도를 증가시켜 역으로 피해를 유발할 수 있어 사용시 주의를 요한다. 따라서 본 연구에서는 국내의 대표적 계사 형태인 터널식 환기 무창 육계사에서 쿨링패드를 가동시 계사 내부의 온도 저감 효과를 더위지수(temperature-humidity index; THI)로 함께 평가하고자 하였다. 본 연구에서는 우리나라의 각각 다른 지역에 위치한 8개의 터널식 환기 무창계사 육계농가를 대상으로 여름철(6~9월) 온도와 습도 데이터를 수집하였다. 해당 농가들은 쿨링패드의 유무에 따라 2개의 처리군으로 나뉘었으며, 출하 2주 전 기준으로 온습도 데이터를 추출하여 계사 내·외부간 온습도 및 THI의 편차를 구하였다. 메타분석 결과, 여름철 가장 더운 낮시간대인 14시를 기준으로 대조구 대비 쿨링패드 보유 농가에서 내외부 온도의 차이가 크고, 해가 지는 16시대에 내외부 온도의 차이가 줄어드는 것으로 관찰되었다(P<0.05). 쿨링패드에 따른 상대습도에 대한 유의적인 차이는 없었으나(P>0.05), 스트레스를 수치화한 THI 지수로 환산하였을 때, 오후 3시부터 대조구 대비 쿨링패드 보유 처리구가 THI 편차 값이 감소하여 효과가 줄어드는 것으로 판단되었다(P<0.05). 본 연구의 결과 14시 쿨링패드를 보유한 농가는 쿨링패드가 없는 대조구 농가보다 계사내외부 온도차가 크게 나타났고, 이는 계사내부 온도저감에 효과가 있다고 판단할 수 있다. 따라서 쿨링패드 사용시 계사내 더위피해를 저감하는 데 효과가 있을 것으로 생각되며, 본 연구의 결과는 하절기 육계의 고온스트레스 저감을 위해 쿨링패드 운용시 참고자료로 활용할 수 있을 것으로 생각된다.

• 한국철도학회논문집
• /
• 제14권2호
• /
• pp.100-108
• /
• 2011

본 논문은 고속철도 디스크 브레이크용 유연 제동 패드의 성능 향상을 위해 구조적 안정성 검토와 신뢰성에 대한 연구를 수행하였다. 연구에서는 유연패드의 구조 해석 과정을 거쳐 개선된 모델을 얻어내었으며, 실제 크기와 동일한 1/2 모델을 가지고 구조적 안전성을 확인하였다. 또한, 축소 시편을 제작하여 모달 시험과 스트로크 및 내구성 시험을 수행하여 동 특성과 기계적 안정성을 확인하였다. 샤시 다이나모 장비와 열 적외선 캠코더를 이용하여 유연패드에 대하여 회전 속도에 따른 열섬 발생 현상을 측정하고, 디스크와 패드 사이의 균일한 접촉 능력을 확인하였다. 또한, 제동 시 유연패드에 안정적인 온도 분포가 이루어지는 것을 확인할 수 있었다. 이와 같은 결과를 토대로 제안된 유연패드의 구조 안정성 및 열에너지 방출 효과 등의 장점을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.360-361
• /
• 2005

Rapid progress in IC fabrication technology has strong demand in polishing of silicon wafer to meet the tight specification of nanotopography and surface roughness. One of the important issues in Si CMP is the stabilization of polishing pad. If a polishing pad is not stabilized before main Si wafer polishing process, good polishing result can not be expected. Therefore, new pad must be subjected into break-in process using dummy wafers for a certain period of time to enhance its performance. After the break-in process, the main Si wafer polishing process must be performed. In this study, the characteristics of break-in process were investigated in Si wafer polishing. Viscoelastic behavior, temperature variation of pad and friction were measured to evaluate the break-in phenomenon. Also, it is found that the characteristic of the break-in seems to be related to viscoelastic behavior of pad.

• Tribology and Lubricants
• /
• 제32권1호
• /
• pp.1-8
• /
• 2016

This paper focuses on the thermal deformation induced preload change in the tilting pad journal bearing, using a three-dimensional (3D) thermo-hydro-dynamic (THD) approach. Preload is considered as a critical factor in designing the tilting pad journal bearing. The initial preload measured under nil external load and nil thermal gradient is influenced by two factors, namely, the thermal deformation and elastic deformation. Thermal deformation is due to a temperature distribution in the bearing pads, whereas the elastic deformation is due to fluid forces acting on the pads. This study focuses on the changes induced in preload and film clearance due to thermal deformation. The generalized Reynolds equation is used to evaluate the force of the fluid and the 3D energy equation is used to calculate the temperature of the lubricant. The abovementioned equations are combined by establishing a relationship between viscosity and temperature. The heat transfer within the bearing pads, the lubricant, and the spinning journal is calculated using the heat flux boundary condition. The 3D Finite Element Method (FEM) is used in modeling the (1) heat conduction in the spinning journal and bearing pads, (2) thermal gradient induced thermal distortion of the spinning journal and pads, and (3) viscous shearing, and heat conduction and convection in a thin film. This evaluation method has an increased fidelity, and it can prove to be a cost-effective tool that can be used by designers to predict the dynamic behavior of a bearing.

• 대한간호학회지
• /
• 제4권3호
• /
• pp.93-104
• /
• 1974

Regardless of a patient's diagnosis, the care of his skin has been a primary concern of nurses throughout the years. Nurses has washed, dried, and rubbed the skin and have changed his position so as to keep the patient's skin in good condition and to protect him from pressure sores. However, we still find many-patients suffering from the pressure sores which may take many mothers or years of treatment and cost a lot to be repaired. In view of expensive cost for treatment of the sores and low ratios of nursing staff per patient for intensive nursing care, prophylaxis of the bed sores with sufficient aids is extremely important both for patients and for nurses. Therefore, the unique purpose of this study was to determine whether sponge is good enough to treat and prevent the pressure sore as compared with gel pad and sheepskin. Sixty patients in the age range of 15 through 45 who were in unconscious status or have difficulty of mobility were chosen between January and March of 1974 at Seoul National University Hospital. They were randomly assigned to each treatment and observed on every 4th day with regard to level of consciousness, status of mobility, moisture or dryness of the bed, general skin condition, intake of nutrition, vital signs and intervals of position change in comparison with the changes of skin over the bony prominences. The study results were reviewed in a statistical method analysis of valiance-to obtain the following findings: 1. There was no significantly different changes of skin over the sanctum or the trochanter in each group using get pad, sheepskin or sponge. It means that we may substitute sponge for expensive gel pad or sheepskin. 2. There was no significant difference among mean changes of patient's skin in relation to sheepskin, gel pad and sponge. 3. There was no significant changes of patient's akin in relation to level of consciousness, status of mobility, intake of nutrition, general skin condition, temperature, blood pressure or interval of position change. 4. There were no meaningful interactions between each treatment and level of consciousness, moisture or dryness of the bed, intake of nutrition, general skin condition, temperature or blood pressure. 5. Sheepskin and gel pad had significantly better influence on patients with limited mobility than on patients with immobility, and sponge on patients with immobility on than patients with limited mobility, 6. Sheepskin and sponge had meaningfully totter influence on patients changing position at below 2-hour interval, gel pad at 2-4-hour interval, sheepskin at 4-6-hour interval, and three of them at above 6-hour interval.