• Archives of Plastic Surgery
• /
• 제39권6호
• /
• pp.612-617
• /
• 2012

Background Packing after closed reduction of a nasal bone fracture causes inconvenient nasal obstruction in patients. We packed the superior meatus with Vaseline gauze to support the nasal bone, and packed the middle nasal meatus with a Doyle Combo Splint consisting of an airway tube, a silastic sheet, and an expandable sponge to reduce the inconvenience. In addition, we aimed to objectively identify whether this method not only enables nasal respiration but also sufficiently supports the reduced nasal bone. Methods Nasal ventilation was measured via spirometry 1 day before surgery and compared to 1 day after surgery. To compare support of the reduced nasal bone by the 2 methods, 2 plastic surgeons assessed the displacementon X-rays taken after the surgery and after removing the packing. The extent of nasal obstruction, dry mouth, sleep disturbance, headache, and swallowing difficulty were compared with visual analog scales (VAS) on a pre-discharge survey. Results In the experimental group, the nasal respiration volume 1 day after surgery remained at $71.3%{\pm}6.84%$ on average compared to 1 day prior to surgery. Support of the reduced bone in the experimental group ($2.80{\pm}0.4$) was not significantly different from the control group ($2.88{\pm}0.33$). The VAS scores for all survey items were lower in the experimental group than in the control group, where a lower score indicated a lower level of inconvenience. Conclusions The nasal cavity packing described here maintained objective measures of nasal respiration and supported the reduced bone similar to conventional methods. Maintaining nasal respiration reduced the inconvenience to patients, which demonstrates that this packing method is useful.

• 한국음향학회지
• /
• 제31권4호
• /
• pp.214-224
• /
• 2012

The objective of this paper is to design multichannel spherical loudspeaker array by considering various positioning methods such as Gaussian grid, Lebedev grid and packing method. For the spatial sound manipulation, which is to make desired sound field by controling multiple sound sources, the Kirchhoff-Helmholtz integral states that sound fields can be reproduced in terms of infinite control sources on the integral surface. But since we cannot control infinite number of sources for the implementation, we have to allocate finite number of sound sources which can approximately act as infinite number of sources. To manipulate sound field inside of a sphere (which is typical example of three dimensional array) by controlling sound sources on the surface, three methods of allocating sound sources, which are Gaussian grid, Lebedev grid and packing method, are reviewed. For each geometry, the performances of manipulation rendered by time-reversal operator and higher-order ambisonics are compared.

• 대한전자공학회논문지SP
• /
• 제48권6호
• /
• pp.61-67
• /
• 2011

3D TV를 위한 스테레오 영상은 기존의 디지털 TV와 호환성을 유지하기 위하여 프레임 호환 패킹 포맷으로 전송될 수 있다. 이 경우 수신단은 해상도가 절반으로 줄어든 스테레오 영상으로부터 원래 크기의 좌우 영상을 확대하여 복원할 필요가 있다. 이 논문은 삭제된 영상 라인의 픽셀값을 적응적으로 내삽하는 기법을 제안한다. 삭제되지 않은 주변 영상 라인의 정보로부터 수평라인 기반 선형 필터와 NEDI6를 선택적으로 적용함으로써 기존의 Bilinear 내삽 기법에 비해 0.6dB 정도의 화질 향상을 달성할 수 있었다.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.343-350
• /
• 1997

To fabricate the ceramic/metal(SiC/ Al alloy) composite, SiC preform was prepared by Pressureless Powder Packing Forming Method and 6061 Al alloy was infiltrated into the preform. Uniform compact having an average pore size of 10 ${\mu}{\textrm}{m}$ and narrow pore size distribution was prepared. Phenolic resin solution(40 wt%) was penetrated into the SiC compact, and then the compact was preheated at the temperature of 120$0^{\circ}C$. The pore size distribution and the microstructure of the preform were not changed by preheating. An uniform microstructure without any crack in the preform was obtained in SiC-Al alloy composite. The infiltration of 6061. Al alloy into the preform began at the temperature of 130$0^{\circ}C$ and the amount of infiltration increased in proportion to the infiltration temperature and the soaking time. The increasement rate of the infiltration amount decreased after 3 h. As a result of the infiltration at 140$0^{\circ}C$ for 4 h, Al alloy was well distributed in the interparticle channels and the relative density of the composite was above 98%. The strength and the fracture toughness of the composite were 303 MPa and 21.65 MPam1/2, respectively.

• 대한전자공학회논문지SD
• /
• 제45권2호
• /
• pp.93-100
• /
• 2008

본 논문에서는 NoC 기반 SoC의 테스트 시간을 감소시키기 위하여 NoC를 TAM으로 재활용하는 구조를 바탕으로 하는 새로운 형태의 스케줄링 알고리즘을 제안한다. 제안한 방식에서는 기존 연구된 NoC 테스트 플랫폼을 사용하여 스케줄링 문제를 rectangle packing 문제로 변환하고 이를 simulated annealing(SA) 기법을 적용하여 향상된 스케줄링 결과를 유도한다. ITC'02 벤치회로를 이용한 실험 결과 제안한 방법이 기존 방법에 비해 최대 2.8%까지 테스트 시간을 줄일 수 있음을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.57-62
• /
• 2017

차량의 전자화가 진행됨에 따라 차량내 전자제어장치의 사용이 증가하고 있으며 각 제어장치들은 급증하는 정보의 처리를 위해 차량 통신 네트워크에 연결되고 있다. 본 논문에서는 FlexRay-CAN의 이종 통신망에 연결된 액추에이터의 네트워크 기반 제어를 위한 FlexRay-CAN 게이트웨이를 구현하고 FlexRay 슬롯의 2분법을 사용하여 할당된 최소한의 FlexRay 프레임 ID (Frame ID)를 사용하여 필요한 센서 정보를 제어 안정성을 보장하는 최대 허용 지연시간 이내로 전송하기 위한 패킹 알고리즘 제안한다. 접촉 힘 센서 정보를 대상으로 패킹맵을 구성하였으며 제안된 알고리즘은 이종의 네트워크에 분산되어 있는 시스템의 제어에 적용할 수 있다.

• 한국식품저장유통학회지
• /
• 제12권1호
• /
• pp.1-7
• /
• 2005

저온$(5^{\circ}C)$에서 가루차를 일반포장, 일반포장+항산화제, 일반포장+방습제처리시 4개월 이후 품질관련 성분인 총질소, 총아미노산, 탄닌, 카페인, 엽록소, 지방산 함량이 상당히 저하되었으며, 일반포장 + 진공처리는 일반포장 저장에 비해 1개월 정도 저장기간의 연장이 가능하였다. 제품의 표면색상은 저온$(5^{\circ}C)$보관시 일반포장에서는 저장 1개월에 a값(녹색)이 -16.43에서 저장 5개월에는 $42\%$정도 감소된 -10.11로 크게 감소되었다. 외관과 내질에 따른 관능평가시 저온$(5^{\circ}C)$저장의 경우 일반포장 내에서 1개월 경과시 89점이었으나 3개월 보관시 78점으로 가루차의 외관과 내질이 크게 열악해졌으며, 일반포장 + 진공의 경우 4개월 보관시 79점으로 일반포장보다 1개월 정도 더 연장보관이 가능하였다. 본 연구에서는 진공포장한 가루차를 $5^{\circ}C$에서 저장한 것이 처리구 중 가장 우수한 결과를 나타내었다.

• 공업화학
• /
• 제9권6호
• /
• pp.852-856
• /
• 1998

유동층 연소로에서 압력 요동의 통계적 처리 방법을 이용하여 충전물질의 유동층 거동에 대한 영향을 분석하였다. 실험은 내경이 6.7cm인 유동화 장치에서 수행하였고, 실험변수는 입자크기 및 분포, 유동화가스, 유동층의 aspect ratio(L/D), 충전물 등이다. 충전물질은 스크린 충전물질을 사용하였고, 압력 요동 특성은 차압 전달기로 측정하였다. 측정 압력 요동 특성치는 평균값과 표준편차, power spectral밀도 합수의 주진동수 등이다. 압력요동의 표준 편차는 압력 측정 tap의 반경 방향에 거의 영향을 받지 않았으며, 압력 측정 tap의 축방향에서는 충전물이 없는 경우 가스분산판 약 4.5cm 이상에서는 거의 일정하다. 충전물의 크기가 증가할수록 주진동수는 감소하는 경향이 나타났으며, 충전물의 양이 10% 부근에서 주진동수가 가장 큰 변화값을 나타내었다. 압력 요동의 표준 편차는 유동층 연소로의 거동을 해석하고 유동화 현상을 설명하는데 효과적이며, 압력 요동의 특성들은 충전물질에 많은 영향을 받았다.

• 한국식품영양과학회지
• /
• 제6권1호
• /
• pp.1-8
• /
• 1977

The sample persimmons were obtained from the of Yung-am Kun, Korea on October 24, and November 9, 1973. These persimmons were kept at room temperature overnight, then packed and stored on the following day at $0^{\circ}C$ and $85{\sim}100%$ humidity. Seven experimental items were studied : 1. control, 2. packing with excelsior in wooden boxes, 3. packing with rice hull in wooden boxes, 4. packing in bags of 0.03 mm polyethylene membrane, 5. packing in bags of 0.06 mm polyethylene membrane, 6. packing in bags of 0.08 mm polyethylene membrane, 7. packing in sealed desiccators. The dimension of polyethylene bags were $14{\times}28cm$ and three persimmons were packing in each bag. The results are as follows: 1. The persimmons both in polyethylene bags and in desiccators lost only 1 % or less of weight, while in control (1) packing with excelsior (2) or with rice hull (3) the loss was 6-7 % in weight after $2{\sim}3$ months. The persimmons became visibly shriveled and spongy-like in it's texture when it lost 5 % of weight. 2. Carbon dioxide content within the polyethylene bags and desiccators rapidly increased during the early storage period, and reached 5 % (in 0.03 mm polyethylene bags) to 50 % or more (in desiccator) after 1 month. In the polyethylene bags of 0.08 mm and desiccator, the carbon dioxide accumulated to a dangerous level and the persimmon showed physiological damage in a longer storage period. 3. The advance of after-ripening and deterioration of persimmon sealed in the polyethylene bags was slower than that in open bags when moved out to room temperature from the chilling and the polyethylene bags of 0.06 mm retarded the after-ripening most effectively. 4. On the basis of these results, a temperature of $0^{\circ}C$, relative humidity of almost $85{\sim}100%$ and combinations of 5 % oxygen and $5{\sim}8%$ carbon dioxide seem to be the optimum condition for the storage of persimmon (Teabong-Si). The most successful method of storing was to pack them in polyethylene bags of 0.06 mm and then to store them at $0^{\circ}C$.

• Journal of Rhinology
• /
• 제25권2호
• /
• pp.86-90
• /
• 2018

Background and Objectives: Although polyvinyl acetate ($Merocel^{(R)}$) has been widely used as a packing material after septoplasty, removable nasal packing can increase patient discomfort, local pain, and pressure. Furthermore, the removal of nasal packing has been described as the most uncomfortable and distressing feature associated with septoplasty. The purpose of this study was to investigate the efficacy of polyvinyl acetate with carboxymethyl cellulose sheet ($Rhinocel^{(R)}$) nasal packing on patient subjective symptoms, degree of bleeding, hemostasis, and wound healing following septoplasty. Subjects and Method: Forty patients with nasal septum deviation requiring septoplasty were included. Following surgery, one nasal cavity was packed with $Rhinocel^{(R)}$ and the other one with $Merocel^{(R)}$. Patient subjective symptoms while the packing was in situ, hemostatic properties, pain on removal, degree of bleeding on removal, duration of hemostasis after removal, postoperative wound healing, and the cost of the pack were evaluated. Results: Although the two types of packing materials were equally effective in controlling postoperative bleeding after septoplasty, $Rhinocel^{(R)}$ was significantly more comfortable while in situ and less painful on removal than $Merocel^{(R)}$, which was associated with significantly more bleeding on removal and so more time was needed to control hemorrhage. There was no significant difference in postoperative wound healing or pack cost. Conclusion: The use of $Rhinocel^{(R)}$ after septoplasty has less discomfort, greater patient satisfaction, and less bleeding on removal with no adverse reactions compared to $Merocel^{(R)}$ packing. Therefore, $Rhinocel^{(R)}$ may be a useful packing material after septoplasty.