• 설비공학논문집
• /
• 제3권3호
• /
• pp.176-185
• /
• 1991

Pressure drop and flow characteristics through a filter medium have been investigated numerically. A basic model similar to the filter employed in a hard disk drive was established so that the inflow velocity was 0.1 m/s and the box size was $40mm{\times}50mm{\times}30mm$. The filter medium specifications were 0.38mm of thickness, $1{\mu}m$ of fiber diameter, 0.05 of packing density. And the filter medium was pleated by 10 within the filter box. Twenty-one sets of calculation were performed with different inlet velocities, pleated numbers, and packing densities from the basic model. As the result, it was found that the velocity after filter medium had maximum value at the rear of the upstream pleated line, but had minimum value at the rear of the downstream pleated line. This made the velocity distribution have sinusoidal form immediately after the filter medium. As the inlet velocity increased, the pressure drop increased linearly. But as the packing density increased the pressure drop increased quadratically.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
• /
• pp.122-123
• /
• 2000

일반적으로 고형물을 함유하는 통조림 제조에 있어 고형물을 캔에 충진할 경우 물이나 시럽, 조미액 및 식용유 등 Packing medium을 첨가하는데 이 Packing medium 을 첨가하는 목적은 관내의 조미가 가능하고 가열살균하는데 대류전열의 매체로 작용하며 관내에 봉입되는 공기량을 줄일수 있고 관충격에 대하여 완충작용을 하는 역할이 있기 때문이기는 하나 관의 중량이 무겁게 되고 가용성 성분의 희석, 흡수와 팽윤에 따른 육질의 연화 등 단점이 되기도 한다. (중략)

• 한국수산과학회지
• /
• 제33권5호
• /
• pp.399-402
• /
• 2000

일반적인 수산물 통조림의 내용물 속에는 물, 기름 및 조미액즙 등 packing medium이 들어있다. 본 연구에서는 새우, 꽁치 및 굴을 원료로 건조 및 조미 후 packing medium이 없는 새로운 형태의 조미통조림을 제조하고 이들 제품의 진공도별 (15, 30, 45 및 60cmHg) 열침투 특성을 조사할 목적으로 본 연구를 수행하였다. 진공도별 제품의 열침투 속도는 진공도가 높을수록 빠르게 나타났으며 동일시간 살균했을 때 진공도가 높을수록 Fo치가 높게 나타났다. 한편 상법으로 제조된 water pack과 본 시험에서 제조한 조미통조림과의 열침투 속도를 비교했을 때 새우와 꽁치 조미통조림의 경우는 진공도 15cmHg 이상에서는 열침투 속도가 water pack 제품보다는 빠르게 나타났고 굴 제품의 경우는 water pack 제품이 30cmHg 이상에서 열침투 속도가 빠르게 나타났다. 따라서 packing medium이 없는 조미 통조림의 경우 진공도 30cmHg 이상이 되면 기존의 water pack 제품보다 열침투 속도가 빠르다는 사실이 관찰되었다.

• 설비공학논문집
• /
• 제10권3호
• /
• pp.358-367
• /
• 1998

Since the performance of cooling tower is strongly dependent on the thermal performance of the packing, the evaluations of heat transfer rate and fan power from various packing have attracted intense interest. In the present study, two new packings have been devised and their performances have been compared with those of two existing packings to find better shape characteristic. It is found that one of the existing packings, which showed high heat transfer rate and medium fan power due to zig -zag flow passages and highly irregular surfaces, should be adapted.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1284-1296
• /
• 2004

In order to investigate effects of anisotropic fiber packing on stresses in composites, a Volume Integral Equation Method is applied to calculate the elastostatic field in an unbounded isotropic elastic medium containing multiple orthotropic inclusions subject to remote loading, and a Mixed Volume and Boundary Integral Equation Method is introduced for the solution of elastostatic problems in unbounded isotropic materials containing multiple anisotropic inclusions as well as one void under uniform remote loading. A detailed analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out for square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively. Also, an analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out, when it is assumed that a void is replaced with one inclusion adjacent to the central inclusion of square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively, due to manufacturing and/or service induced defects. The effects of random orthotropic fiber packing on stresses at the interface between the isotropic matrix and the central orthotropic inclusion are compared with the influences of square and hexagonal orthotropic fiber packing on stresses. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with multiple orthotropic inclusions and one void, it will be established that these new methods are very accurate and effective for investigating effects of general anisotropic fiber packing on stresses in composites.

• Journal of the Korean Wood Science and Technology
• /
• 제2권3호
• /
• pp.39-41
• /
• 1974

Bastard indigo, prevailing shrub species planted in erosion control work to constitute vegetation, is proved to be usefull for pulp material other than existing usage of green manure or fuel. Pulp made from bastard indigo is good enough for filler pulp though the quality of it is not remarkably excellent. (1) Sorts of paper possible to make from this pulp. Packing paper of medium grade. (general packing paper except heavy packing) (2) Traits of this pulp as for pulp material (A) It is more preferable than annual plants in these respects, ego collection, transport and storage of pulp material, and yield, freeness and chemical consumption of pulp. (B) Annual probable production of pulp material per ha from this plant is higher than that from long-term tree species or similar to that from fast growing species. (C) Its cultivation on eroded area is welcomed and consecutive annual production of material by copice method is also proved possible.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.989-994
• /
• 1994

This study aims at finding the closest packings of regular shape particles such as sphere, circle rod and hexagonal rod type. As the ratio of particle size to container lowered to less than 1/10, the wall effect decreased gradually. The tap density of spherical particles with almost orthorhombic arrangement was 59.5%, while those of circle rod and hexagonal rod type particles were 63.5% and 63.0% respectively. And it was decreased with increasing the aspect ratio of regular particles. The tap density of binary mixtures was larger than that corresponding to the monosized particles packing by about 15%. The tap density of ternary mixtures was larger than that of corresponding to the packing of binary mixtures by about 9%. This work employed the binary mixture of 60% coarse particles and 40% fine particles with size ratio of 1.0 to 1/10 and the ternary mixture of 60% coarse particles, 20% medium and 20% fine particles with size ratio of 1:1/10:1/400 respectively.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.193-203
• /
• 2012

In the limitless competition era of the 21st century, cost reduction is being highlighted as one of survival strategies of businesses. The first item for cost reduction of businesses is logistical costs. The most keenly required thing for this is to remove unnecessary elements, and the best way to realize it to cut down processes using automatic facilities. Packing container in logistics is like a facility. This study is intended to analyze reduction of costs, improvement of business process and reduction of working force through standardization of standardization, and logistics effects through improvement of environmental images in enterprises.

• 농업과학연구
• /
• 제31권2호
• /
• pp.149-160
• /
• 2004

This study had carried out an analysis of leaf tobacco production cost by cost items, growing stages, and farm sizes per 10a to provide the basic data for determination of the purchasing price of leaf tobacco by KT&G. Considering the survey results of 12 tobacco farm households, the composition rates of production cost by items revealed as 7-10% for land service, 5-22% for depreciation, 13-25% for material costs, 50-65% for labour cost respectively. The production cost of leaf tobacco by growing stages were shown as 15.3% in nursery bed period, 32.3% in main growing period in field, 30.8% in harvesting period and 21.6% in packing period. The magnitude of wage expenditure was appeared as harvesting stage, packing stage, growing stage on main field and nursery bed stage in order. The amount of material costs were revealed as the growing stage in main field, harvesting stage, nursery bed stage and packing stage respectively. The production costs of leaf tobacco per 10a by farm sizes were shown as 1,615,879won for small farm, 1,446,896won for medium farm and 1,454,408won for large farm respectively. The production cost of leaf tobacco had shown decreasing tendency according to increasing farm sizes. To promote the international market competitiveness of leaf tobacco producing farms, labour saving production technologies and cost effective farm size to decrease tobacco production cost should be developed.

• 한국시뮬레이션학회논문지
• /
• 제16권4호
• /
• pp.67-75
• /
• 2007

RFID(Radio Frequency IDentification)가 국방, 물류/유통, 도서 관리 등의 분야에서 바코드를 대체하는 대안으로 각광을 받고 있으나, 적용 범위가 제품 생산이나 판매 유통 관리 등의 분야로 제한되어 있는 것이 사실이다. 본 논문에서는RFID 기술을 공정관리에 적용해 본 후, 그 효과를 분석하였다. 또한 유통단계뿐 아니라 제품의 이력관리 및 품질관리에 RFID의 적용 가능성을 타진하기 위해, 제조 및 포장공정에 활용하는 방안을 제안하였다. RFID 적용 효과를 검증하기 위해 실제 제조업체를 대상으로 현재 바코드를 부착하는 공정을 RFID로 변경하였을 때 공정 개선 효과를 산출하였으며, 연구 결과 RFID 도입에 소모되는 초기 투자 비용을 상쇄할 수 있는 비용절감 효과가 있음을 확인하였다. 이로써 높은 초기 비용으로 인해 바코드에서 RFID로의 교체를 망설이는 제조업체들의 의사결정에 기여할 수 있을 것으로 기대된다.