• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.110-116
• /
• 1994

In this research, the tensile strength of molded parts and pressure distribution were analyzed to study the cavity filling stage and packing stage in injection molding. The measurement of cavity pressure was obtained by a data acquisition system with the installation of transducers in the cavity. Molded parts were tested by a universal testing machine to obtain the tensile strength. For the experimental work, the tensile strength of molded parts increased with longer packing time and exact freezing time of the gate was obtained by a cavity pressure curve. In addition, the effect of packing did not occur and tensile strength was almost constant after early 1.5 sec of the freezing time of gate. Density tended to be higher about 0.2% due to a larger degree of mold temperature and melt temperature. Also, changing pressure in the cavity was effectively sensed. Thereafter, the possibility of the development of pattern recognition expert system was confirmed on the basis of the experimental results.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.431-441
• /
• 2020

For the purpose of improving the properties of UHPC as well as the economic efficiency in production of the material, Availability of river sands as fine aggregate instead of micro silica sand were investigated. Four different sizes of river sands were considered. Using river sand instead of micro silica sand increased the flowability, and decreased the yield stress and plastic viscosity in rheological properties, and the effect was higher with larger particle size of river sand. It was demonstrated by analyses based on the packing density. In the results of compressive strength and elastic modulus, even though river sand was not as good as micro silica sand, it could provide high strength of over 170 MPa and elastic modulus greater than 40 GPa. The difference in compressive strength depending on the size of river sand was explained with the concept of maximum paste thickness based on the packing density of aggregate. The flexural performance with river sand also presented relatively lower resistance than micro silica sand, and the reduction was greater with larger particle size of river sand. The flexural performance was proven to be also influenced by the difference in the fiber orientation distribution due to the size of river sand.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.725-725
• /
• 2003

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.694-698
• /
• 2007

This present study has dealt with the effect of surfactant on the freezing of aqueous solution Sodium chloride aqueous solution was used to measure the effect of surfactant and the main parameters of this experiment were temperature of bath, revolution of stirrer. and the radial velocity of NaCl solution. The acquired main conclusions are as follows; 1) the lower super-cooling temperature make hardly to attach the ice on beaker, 2) the size of ice become smaller to add the surfactant, 3) the ice packing factor increase with increasing of stirrer revolution.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권3호
• /
• pp.116-121
• /
• 2004

고밀도 순환여과식 해산어 양식장의 순환수 처리에 EMMC공정의 적용 가능성을 평가하기 위한 실험을 실시하였다. 처리공정의 운전효율에 유기물 및 암모니아성 질소 부하가 미치는 영향을 평가하기 위하여 수리학적 체류기간을 12시간에서 10분까지 점차적으로 줄여가며 실험을 실시하였다. HRT 2시간까지는 수리학적 체류시간 변화에 따른 제거효율 변화가 거의 없었으나 그 이하의 체류시간에서는 체류시간 단축에 따른 제거효율의 감소가 비교적 크게 나타났다. COD의 경우에는 체류시간 단축에 따른 급격한 제거효율의 변화가 관측되지 않았으며 10분 정도의 체류시간에서도 90％이상의 제거효율을 나타내었다. 메디아 충진율에 따른 반응조 운전효율변화를 보면 HRT가 1시간보다 긴 경우에는 메디아 충진율에 따른 제거효율 변화가 극히 미미하였다. 그러나 1시간 이하의 체류시간에서는 그 차가 상당히 크게 나타나 충진량이 많을수록 제거효율이 높게 나타났으나 50％이상의 메디아 충진이 반응조 운전효율 측면에서는 큰 역할을 하지 못함을 나타내어 경제성 등을 고려할 경우 25％정도만을 충진 시키는 것이 오히려 합리적이라 판단되었다. 이와 같은 경향은 암모니아성 질소 제거의 경우에도 유사한 양상을 나타내었다. 메디아 충진율 50％와 75％사이에는 처리효율의 차이가 거의 없었고 25％충진 반응조와의 차이도 그리 크지 않은 것으로 나타났다.

• 한국가축번식학회지
• /
• 제26권2호
• /
• pp.119-124
• /
• 2002

본 연구는 돼지에서 동결정액을 이용한 번식능력을 개선하기 위한 동결정액 포장재료의 효과를 구명하기 위하여 실시하였다. 본 시험에는 축산기술연구소 종축개량부 (충남, 성환)의 인공수정센터에서 사육중인 종모돈이 사용되었다. 기존의 돼지 동결정액 포장방법인 maxi-straw 동결정액 포장방법과 5$m\ell$빈 cryogenic-vial 및 aluminum-pack 포장방법을 비교한 결과 cryogenic-vial로 포장하여 액체질소 상단 15cm에서 동결한 후 52$^{\circ}C$ water bath에서 190초 융해한 방법이 기존의 maxi-straw 방법과 비슷한 결과를 나타내었다. Cyogenic-vial 포장방법의 동결-응해 방법을 설정하기 위하여 융해시간을 달리하여 시험한 결과 액체질소 상단 15cm에서 동결하고 52$^{\circ}C$에서 190초 간 융해하였을 때 정자운동성이 120초 및 150초 응해시 보다 우수하였다 (P<0.05). 그러나 정상첨체비율은 응해시간 간에 차이가 없었다. 52$^{\circ}C$에서 45초간 응해 한 maxi-straw 포장방법과 52$^{\circ}C$에서 190초 융해한 cryogenic-vial 포장방법간에 정액성상을 비교한 결과 총정자운동성과 정자의 빠르기는 maxi-straw가 우수하였다 (P<0.05). 그러나 직진성과 정상첨체비율은 두 포장방법간에 차이가 없었다. 동결정액 포장방법별 인공수정시 번식성적은 maxi-straw 동결정액이 cryogenic-vial 동결정 액보다 수태율, 분만율, 그리고 산자수가 높았으나 통계적 유의차는 인정되지 않았다. 이상의 결과를 종합해 보면 cryogenic-vial 포장 방법의 동결 및 음해방법을 좀 더 연구개발하면 기존의 maxi-straw포장방법을 대체하여 실용화 할 수 있을 것으로 사료된다.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1022-1030
• /
• 2006

Activated sludge reactors maintaining an MLSS of 3,000 mg/L and packed Bio Contact Media (BCM fixed beds) was studied in lab-scale to determine the optimal packing ratio and an HRT of aerobic reactor in terms of organic removal, nitrification, denitrification efficiencies. At all HRTs of 3 hr, 5 hr, 7 hr respectively, reactors without BCM, control reactors, had the lowest TCODcr removal efficiency about 74.6%, and reactors with the BCM packing ratios of 10%, 15%, 20% had a greater TCODcr removal efficiency above 81.4%. As HRT decreased, the TCODcr removal efficiency decreased also in all reactors. However, a better utilization of TCODcr even at a higher organic loading was observed in reactors with BCM. The nitrification efficiency at all reactors was greater than 94%, and reactor with 20% packing of BCM had the highest nitrification efficiency at 97.9% while the TKN loading increased at $0.085mgTKN/m^3{\ast}day$ as HRT decreased, In terms of denitrification efficiency, the reactor without BCM ranged from 11.6% to 13.7%, and the reactors with BCM ranged from 28.3% to 63.4% which suggests that the more BCM is packed in the reactors, the higher the denitrification efficiency is achieved. Two parallel $A^2/O$ systems maintaining an MLSS of 3,000 mg/L were operated to investigate the effect of BCM packing ratio of 20% on organic removal, nitrification, denitrification efficiencies. Packing with BCM in system of aerobic reactor affected the SCODcr removal efficiency that increased from 73% to 78%. The nitrification efficiency for both systems with or without BCM was greater than 95%. The denitrification efficiency of systems with BCM and without BCM was 85.8% and 81.8%, respectively which appears that the denitrification efficiency was increased slightly by packing BCM. Compared denitrification efficiency in $A^2/O$ system to previous experimental study with activated sludge reactors operates with the same HRT $A^2/O$ system showed only 29% greater denitrification efficiency. It suggests that $A^2/O$ system with BCM can achieve a similar level of denitrification efficiency when the HRT of anoxic reactor is decreased to some extent.

• 한국식품영양과학회지
• /
• 제20권2호
• /
• pp.139-147
• /
• 1991

반염건(半鹽乾)고등어 제조시 염지(鹽漬)처리 후 건조하는 공정에서 값싼 셀로판필름으로 포장하여 건조함으로써 제품의 제조 및 저장중 품질에 미치는 효과에 대해 실험하였다. 제조 직후 식품(C)와 (P)의 수분함량은 각각 56.2%, 63.6%로 (P)의 수분함량이 7.4%높았다. pH, 휘발성염기질소 및 아미노질소의 저장중 증가폭은 제품(P)가 적었다. 색조(L값, a값, b값)는 저장중 제품(C), (P) 모두 감소하는 경향이었다. 생균수는 저장초기에 약간 감소하다가 그 이후로 계속 증가하여 제품(C)는 14일째에 $8.5{\times}10^{6}/g$ 이었으나 제품(P)는 저장 21일째에도 $3.0{\times}10^{5}/g$이었다. TMAO는 저장중 감소하고 TMA는 증가하는 경향이었고 그 증감의 폭은 제품(P)가 적었다. TMA값과 과산화물값은 저장중 증가하다가 저장 14일 이후로 감소하였고 증가폭은 제품(P)가 적었다. 혼합지방산에 있어서 폴리엔산의 저장중 감소율 역시 제품(P)가 적었다. 관능 검사결과 저장 14일째에는 제품(C)는 (P)에 비해 현저히 품질이 떨어졌고 제품(P)는 저장 14일째에도 식용가능하엿다. 이화학적 및 관능적평가로 미루어보아 셀로판필름으로 포장한 후 건조하여 만든 반염 건고등어 제품(P)는 포장하지 않고 제조한 제품(C)에 비해 품질유지면에서 우수하다는 결론을 얻었다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제28권4호
• /
• pp.1-25
• /
• 2019

Purpose The purpose of this study is to investigate cognitive mechanism of goal relations (Single-goal vs. Multiple-goals) and to-do list (Packing vs. Unpacking) and also verify the role of self-efficacy in the perspective of motivation belief. The perspective of cognitive mechanism is related to the effects of how the relations of multitasking environments affects to facilitating relation or conflicting relations. In pursuit of a single goal, judgement of task importance can be facilitated by unpacking effect due to relations of strongly associated project components including to-do list. On the other hands, in pursuit of multiple goals, judgement of task importance can be conflicted due to mutually exclusive relations of multiple goals. Additionally, the cognitive mechanism can be regulated from the role of self-efficacy, which contributes to motivation belief on how much a person is confident in achieving given tasks. In the end this research is to identify self-efficacy as boundary condition in inhibiting the effects of facilitation and conflict. Design/methodology/approach This study conducted Two-way ANOVA (Packing/ Unpacking * Single-goal/ Multiple-goals) to explore the effects of cognitive mechanism on task importance. After that we performed Three-way ANOVA, 2 (To-do list: Packing/ Unpacking) * 2 (Goal relation: Single-goal/ Multiple-goals) * 2 (Self-efficacy: Low self-efficacy/ High self-efficacy) to verify the role of self-efficacy between goal relations and to-do list. Findings In the cognitive mechanism, the task importance is not significantly different between in packed and in unpacked condition in pursuit of a single goal. But multitasking with multiple goals causes goal conflict, which means packed condition indicates significantly higher task importance than unpacked condition. Additionally, for a group with low self-efficacy unpacking leads to conflicting relation, which implies that packed condition is more efficient strategy than packed condition. On the other hands, in pursuit of mulitple goals, either packing or unpacking has no distinctive effects on task importance. However, participants with high self-efficacy are no longer affected by facilitating relation and conflicting relation as well in pursuit of either a single goal or multiple goals as well.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.613-618
• /
• 2001

For the evaluation of operability of MOV(Motor Operated Valve), the precision prediction of thrust/torque acting on the valve is important. In this paper, the analytical prediction method of thrust/torque was proposed. The design basis stem thrust calculation typically considers the followings: Packing thrust, Stem rejection load, design basis differential pressure load. In general, test results show that temperature, pressure, fluid type, and differential pressure, independently and combination, all have an effect on the friction factor. The prediction results of thrust/torque are well agrement with dynamic test results.