• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2174-2183
• /
• 2021

Helium cooled solid breeder blanket as an important blanket candidate of the Tokamak fusion reactor uses ceramic pebble bed for tritium breeding. Considering the poor effective thermal conductivity of the ceramic breeder pebble bed, thin structure of tritium breeder pebble bed is usually adopted in the blanket design. The container wall has a great influence on the thin pebble bed packing structure, especially for the assembly of mono-sized particles, and thin pebble bed will appear anisotropic effective thermal conductivity phenomenon. In this paper, thin ceramic pebble beds composed of 1 mm diameter Li₄SiO₄ particles are generated by the EDEM 2.7. The effective thermal conductivity of different thickness pebble beds in the three-dimensional directions are analyzed by three-dimensional thermal network method. It is observed that thin Li₄SiO₄ pebble bed showing anisotropic effective thermal conductivity under the practical design size. Normally, the effective thermal conductivity along the bed vertical direction is higher than the horizontal direction due to the gravity effect. As the thickness increases from 10 mm to 40 mm, the effective thermal conductivity of the pebble bed gradually increases.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.149-160
• /
• 2022

In this study, the physical quality and microbial changes of ginseng sprout according to the pretreatment process and packaging container were evaluated to improve the storage properties of ginseng sprout produced in smart farm. Quality change during storage (10 days) according to pretreatment method (ascorbic acid, citric acid, peroxyacetic acid) and packaging container (expanded polystyrene (EP), polypropylene (PP), polyethylene (PE), polypropylene + polyethylene + cast polypropylene (PP+PE+CPP)) was evaluated in terms of texture, viable cell count, water content, and color. As a result of comparison according to the type of pretreatment, the citric acid treatment group showed the lowest texture change and the effect on inhibition of bacterial growth. On the other hand, citric acid, which was most effective among pretreatments, was treated in all samples and then stored in 4 types of containers. Specially, the ginseng sprout in PP packaging container was not observed significant softening or color changes after 10 days storage, and the lowest changes in viable cell number. Therefore, this study was shown that citric acid treatment and use of PP packaging container are effective in increasing the shelf life of ginseng sprout.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2012

The effect of the packing methods for enhancing the shelf life and improving the postharvest quality of the $tah$ $tasai$ Chinese cabbage baby leaf vegetable was studied during storage. Fresh baby leaf vegetables were packed in four commercial packaging types: (1) a non-perforated bag with a 0.03-mm oriented polypropylene (OPP) film; (2) a perforated bag with 1.0-mm-diameter holes on an OPP film; (3) a 0.40-mm polyethylene terephthalate (PET) container with a hinged lid; and (4) an expanded polystyrene (EPS) tray wrapped with a 0.02-mm polyvinyl chloride (PVC) film. The quality parameters, such as the weight loss, moisture content change, color difference, and appearance of the baby leaf vegetables were investigated. The baby leaf vegetables in the PET container and in the non-perforated OPP film bag showed relatively low weight loss, high moisture content, and good external appearance compared to those in the EPS tray and in the perforated OPP film bag during limited storage periods, at $16^{\circ}C$. The PET container also protected the baby leaf vegetables from physical damage. The study results will enable the selection of a better packaging system for extending the freshness and increasing the market ability of baby leaf vegetables.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.418-429
• /
• 2012

In this study we surveyed the packaging preferences of consumers for Korean rice cakes as current commercial products in Korea. The questionnaire was developed from a preliminary investigation of typical rice cake packaging patterns and sent to 2332 residents in Korea by random sampling mail. The questionnaire contained questions on the preferences of interior design in packaging, opening methods, individually separated types, printing position, packaging methods, and packaging materials such as paper and plastic. There were responses from 304 residents. The collected data was analyzed by an SPSS package program. Most of the packaging used for Korean rice cakes was plastic (58.9%) which was used for packaging materials and stretch wrap (42.9%) as packing methods. The results showed the preference was the perforated line type used by hand for opening a packaging and interior packaging design with 2~3 partitions. Most respondents expressed an interest in using individual packaging and having printing directly on the packaging. Also, the respondents preferred the packaging design that let them see the contents of a package. Based on the results of the questionnaire, this paper suggested that most consumers would prefer to choose a packaging system with a partition design in a plastic container, individually separated products, and a transparent container for Korean rice cakes. The results of packaging preferences could provide important information for suitable packaging development for Korean rice cakes. Further research should be conducted to improve the shelf life of Korean rice cakes with functional packaging systems such as modified atmosphere packaging or anti-microbial packaging.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.35-40
• /
• 2015

Effect of packaging and storage methods for enhancing the shelf life and improving the postharvest quality of lettuce (Lactuca sativa L.) was studied during high temperature period. Lettuces were packed using four packaging and storage types: (A) plastic box container (control); (B) plastic box container covered with high density polyethylene (HDPE) film; (C) plastic box container with lettuce wrapped in linear low-density polyethylene (LLD-PE) film; and (D) plastic box container with lettuce with its stem. The quality parameters, such as fresh weight loss, SPAD value, and appearance of lettuce were investigated. The lettuce wrapped with LLD-PE film inside the plastic box container showed the lowest weight loss, highest SPAD value and best appearance compared to those exposed to the other packaging and storage methods during the three-week storage at $2^{\circ}C$. The results indicate that the marketability of lettuce can be optimized if proper packaging and storing is adopted. Prolonging the freshness even on low temperature storage will increase the potential of its sale ability in the domestic market even during summer season.

• Korean Journal of Food Science and Technology
• /
• v.13 no.3
• /
• pp.219-226
• /
• 1981

To enable off-season peach canning, peaches were halved and processed into solid packs. Following variables were compared in relation to storage stability of solid packs. First as pretreatment-dipping in citric and ascorbic solution after lye peeling; second as pasturization in pouch and hot fill process; third as packaging method-2 ply(PET/PE) and 3 ply(PET/Al/PE) plastic film pouch and metal container; fourth as storage condition $-20^{\circ}C\;and\;-5^{\circ}C$. After 25 weeks storage test, all peaches in different packs were processed into canned peaches just like commercial products, and then quality was organoleptically evaluated from the viewpoint of processing and storage variable of solid packs. The results are follows; 1. Ascorbic acid dipping in 3 ply pouch and citric acid dipping in 2 ply pouch had better quality retention effect than any other pretreatments in respective packing. 2. Pasteurization method gave great effect on the color and texture of the solid pack during storage, but not on the quality of the final canned peach. 3. Can and 3 ply packing were better than 2 ply pouch in storage of solid pack and quality of final canned peach. 4. The $5^{\circ}C$ storage gave better quality than $20^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.243-246
• /
• 1993

For extending the shelf-life of Yukwa (oil puffed rice cake) which is one of the most favorable Korean traditional rice snack, the Yukwa was packed in $O_2$ preventive container and substituted the air with $N_2$ gas or packed with $O_2$ absorbent (ageless sachet). The quality of Yukwa stored at $35^{\circ}C$ was evaluated by POV, AV and TBA including sensory evaluation. The POV of oil in Yukwa of $N_2$ substitute pack and absorbent sachet included were 5.3 and 11.9 meq/kg, respectively, while no packing (control) was 195.5 meq/kg after 90 days storage at $35^{\circ}C$. AV and TBA were also same trend but the gap with the control was not so big. The Yukwa, $N_2$ gas substituted, was better in quality than absorbent treatment in sensory evaluation and no difference was detected in quality of 90 days storage Yukwa at $35^{\circ}C$ with 15 days. The main reason for lower sensory score of absorbent treatment was that the $O_2$ absorbent also absorbed the flavor component of Yukwa.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.182-189
• /
• 2005

This research was conducted to determine physical properties of four root media, peatmoss + vermiculite (1:1, v/v; PV), peatmoss + composted rice hall (1:1, PR), peatmoss + composted saw-dust (1:1 : PS) and peatmoss + composted pine bark (1:1 PB), as influenced by incorporation rate of Stock-sorb C (STSB). Each root medium containing STSB was packed in 22 cm diameter plastic pot and the physical properties were determined at 5 weeks after packing. As incorporation rate of STSB were elevated, total porosity increased in PV, PS and PB media with statistical differences at $5{\%}$ level. Those also resulted in increase of container capacity in PS and PB media, but statistical differences were not observed in PV and PR media. Elevated incorporation rate of STSB in PV, PS and PB media resulted in increase of air space with statistical differences. Trends in air space of the three root media showed a linear as well as quadratic responses to STSB contents of media. As incorporation rate of STSB increased, more water was retained in four root media at the soil moisture tension of 4.90 kPa, 9.81 kPa, 29.4 kPa and 1.5 MPa. The amount of water retained in PS medium was the highest at the moisture tension at 29.4 kPa and 1.5 MPa followed by PB, PR and PV medium. These results indicated that elevation of incorporation rate of STSB to various root media increased moisture retention capacity, but did not increase the available water holding capacity.

• Korean Journal of Acupuncture
• /
• v.22 no.2
• /
• pp.127-149
• /
• 2005

This study is designed to investigate the method of manufacturing herbal acupuncture through literature of oriental medicine. The findings of this study are as follows; 1. The methods of manufacturing herbal acupuncture go through the process of abstraction, purification, mixing, filtration, putting and tight sealing in the container, sterilization, quality control, printing and packing 2. There are many ways to manufacturing herbal acupuncture, for example water-alcohol precipitation, alcohol-water precipitation, liquid-liquid abstract, acid-base abstract, metal base precipitation, distillation, molecular structure, polyamide absorption, dialysis, and ion exchange, etc. And popular method is water-alcohol precipitation. This is through alcohol precipitate extracting the principal ingredients from water abstraction. This is very simple and efficient way using melting characteristics of compounds in herb to water and ethanol. 3. Sterilization of herbal acupuncture is through heating-pressure, boiling, steam flowing, low temperature, filtering, radiation, cooling, and microwaves. Nowadays filtering is commonly used. And sterilization is estimated by an examination of asepsis . 4. Herbal acupuncture must be undergo study and experiment to clinical use. The problems of herbal acupuncture are turbidity, instability, causing hemolysis, pain, and fever. So many provisions (addition, sterilization, and filtration etc.) must be prepared. 5. The theory of manufacturing herbal acupuncture is from oriental medicine, not western. So it must be corresponded to oriental medical theory, for example Gimi(氣味), Guigyung(歸經), Ingyung(引經), Bosa(補瀉), and Match of Herb. It is recommended that further study of many other sided investigations in the future.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.243-248
• /
• 2011

The prevalence and distribution of hazardous microorganisms were investigated from the major perilla cultivation area at Milyang, Gyeongnam province, Korea. Aerobic plate count (APC) and coliform count of perilla leaves were 4.82 log CFU/g and 3.85 log CFU/g, respectively. E. coli, S. aureus and B. cereus were detected in 3.0% (4/114), 7.9% (9/114) and 46.5% (53/114) of examined perilla leaves. However, E. coli O157:H7, Salmonella spp, and L. monocytogenes were not detected. The distribution of hazardous microorganisms in perilla leaf cultivation environment were compared and the concentration of APC and coliform counts were more than 3.0 log CFU/(mL, g, $100cm^2$, hand) from most of the samples. S. aureus were detected from irrigation water, packing table, packing vinyl, hand, and clothes. Also, B. cereus was frequently detected from the examined samples. Especially, packing table and collection container were contaminated with maximum 5.5 log $CFU/100cm^2$ of B. cereus. Good Agricultural Practice (GAP) system should be introduced to farms to enhance the safety of perilla leaves.