• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.1009-1016
• /
• 2015

In this paper, we propose EPCM(Efficient Prediction-based Context-awareness Matrix) algorithm analyzing connectivity by predicting cluster's context data such as velocity and direction. In the existing DTN, unrestricted relay node selection causes an increase of delay and packet loss. The overhead is occurred by limited storage and capability. Therefore, we propose the EPCM algorithm analyzing predicted context data using context matrix and adaptive revision weight, and selecting relay node by considering connectivity between cluster and base station. The proposed algorithm saves context data to the context matrix and analyzes context according to variation and predicts context data after revision from adaptive revision weight. From the simulation results, the EPCM algorithm provides the high packet delivery ratio by selecting relay node according to predicted context data matrix.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.510-520
• /
• 2014

By adopting the MAC(Media Access Control) protocol which enables to pack multiple MPDUs(MAC-level Protocol Data Units) into a single PPDU(Physical Layer Protocol Data Unit), IEEE 802.11n WLAN supports high throughput. Up to now, there have been a lot of existing channel information-based A-MPDU schemes dynamically determining the number of MSDUs according to the wireless channel condition information which is sent from the receiver to sender. However, the channel information-based scheme has a serious drawback having a high system overhead due to the frequent channel feedback information. To reduce the system overhead, the proposed BA-base dynamic A-MPDU scheme simply chooses the number of MSDUs to be retransmitted by not the frequent channel feedback information but the BA signal representing whether MPSUs belonging to the A-MPDU are received or not. Through NS-2(Network Simulator-2), we found that the proposed scheme had higher throughput and lower packet error rate than the existing fixed A-MPDU scheme.

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.184-196
• /
• 2020

In this study, effects of carbon and nickel on microstructure and low temperature Charpy impact properties of HSLA (high strength low alloy) steels are investigated. To understand the complex phase transformation behavior of HSLA steels with high strength and toughness before and after welding processes, three kinds of HSLA steels are fabricated by varying the carbon and nickel content. Microstructure analysis, low temperature Charpy impact test, and Vickers hardness test are performed for the base metals and CGHAZ (coarse-grain heat affected zone) specimens. The specimens with the lowest carbon and nickel content have the highest volume fraction of AF, the lowest volume fraction of GB, and the smallest GB packet size. So, the low temperature Charpy absorbed energy of the CGHAZ specimen is the highest. The specimens with increased carbon and nickel content have the lowest volume fraction of AF, the highest volume fraction of GB, and the largest GB packet size. So, the low temperature Charpy absorbed energy of the CGHAZ specimen is the lowest.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2320-2334
• /
• 1999

In this paper, we propose multiple IS-MMBS service schemes for very low power and micro-size RMIMS (radio-interfaced micro information monitoring system) terminals. In MMBS service area, when new arrival RMIMS terminals have real-time traffic characteristic or large traffic bandwidth, only single IS-MMBS service scheme can not guarantee RMIMS terminal's QoS(quality of service) such as buffer overflow or packet loss. In this case, the proposed multiple IS-MMBS service schemes can be effectively used for QoS service of RMIMS terminal. According to clustering method of RMIMS terminals and MMBS segment method, the proposed schemes can be divided into terminal segment method, region segment method, application based segment method, traffic type based segment method, overlapping segment method and hybrid segment method

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.381-390
• /
• 2009

In this paper, we propose a seamless intra MR-BS handover scheme based on IEEE802.16j transparent. The proposed scheme estimates the outage probability of mobile stations at a base station, finds the optimum relay user, and provides low handover latency for seamless data transmission. The simulation results show that the proposed scheme outperforms the conventional handover schemes in terms of the handover latency by 65% of conventional scheme. Moreover, the proposed scheme exhibits lower packet error rate compared with the conventional handover scheme when a mobile station moves to outside of the cell coverage and reduce both outage probability and the number of handover about 50% from setting forgetting factor and redundant threshold.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.158-170
• /
• 2004

Mobile IP is a base protocol to support host mobility in IP-based wireless network. It is well known that the protocol contains two main delay factors on a handoff process; one is to detect a host movement, and the other is to register the host's current location to its home network. This paper examines Layer 2(L2) handoff procedure in the IEEE 802.11 Wireless LAN, and identifies these L2 triggers that can be usefully applied to Layer 3(L3) handoff. Then, the MCAA(Multiple-Casting using Anchor Agent) mechanism is proposed. It makes use of the L2 trigger and the network topology to construct an anchor agent dynamically, and the multiple-casting scheme to prevent an ongoing packet to be lost. Using a network simulator, the proposed mechanism has been evaluated the handoff delay and the packet lost point of view, in comparison with the regional registration protocol which is the most well known micro mobility support mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.471-479
• /
• 2008

In this paper, we propose a novel algorithm to automatically generate an RTP timestamp value that is required for the RTP packetization in order to transmit SVC video over various If networks such as Internet. Unlike the conventional single layer coding algorithms such as H.263, MPEG-4 and H.264, SVC generates a multi-layered single bitstream which is composed of a base layer and one or more enhancement layers in order to simultaneously provide temporal, spatial, and SNR scalability. Especially, in order to provide temporal scalability based on hierarchical B-picture prediction structure, the encoding (or transmission) and display order of pictures in SVC coding is completely decoupled. Thus, the timestamp value to be specified at the header of each RTP packet in video transmission does not increase monotonically according to the display time instant of each picture. Until now, no method for automatically generating an RTP timestamp when SVC video is loaded in a RTP packet has teen introduced. In this paper, a novel automatic RTP timestamp generation method exploiting the TID (temporal ID) field of the SVC NAL unit header is proposed to accommodate the SVC video transmission.

• Korean Journal of Materials Research
• /
• v.30 no.3
• /
• pp.123-130
• /
• 2020

In this study, two types of thick steel plates are prepared by controlling carbon equivalent and nickel content, and their microstructures are analyzed. Tensile tests, Vickers hardness tests, and Charpy impact tests are conducted to investigate the correlation between microstructure and mechanical properties of the steels. The H steel, which has high carbon equivalent and nickel content, has lower volume fraction of granular bainite (GB) and smaller GB packet size than those of L steel, which has low carbon equivalent and nickel content. However, the volume fraction of secondary phases is higher in the H steel than in the L steel. As a result, the strength of the L steel is higher than that of the H steel, while the Charpy absorbed energy at -40 ℃ is higher than that of the L steel. The heat affected zone (HAZ) simulated H-H specimen has higher volume fraction of acicular ferrite (AF) and lower volume fraction of GB than the HAZ simulated L-H specimen. In addition, the grain size of AF and the packet sizes of GB and BF are smaller in the H-H specimen than in the L-H specimen. For this reason, the Charpy absorbed energy at -20 ℃ is higher for the H-H specimen than for the L-H specimen.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1565-1570
• /
• 2014

In networking communication, nodes and base station send data to each nodes and destination nodes. In this perspective, it is very important to determine the direction in which data sent to each nodes or destination nodes. Ad-hoc routing protocol is a standard routing protocol that determines how the packets sent to destination. Ad-hoc routing protocol includes protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). In our efficient proposed protocol based on small end-to-end sequence numbers, route direction can be changed properly with the assistance of helper nodes. In this paper, we focus on the simulation analysis of proposed protocol and comparison with other routing protocol models such as AODV and DSR. We simulated using Network Simulator (NS-2) by parameters such as simulation time, number of nodes and packet size based on our metrics (packet delivery fraction, routing load, data throughput). Our proposed protocol based on small end-to-end sequence numbers shows better performance and superior to other two protocols.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.51-55
• /
• 2008

Request High-Images, High-quality, duplex transmission, BcN Voice telephone, Broadcast, Data internet service came to be all possible and demolished original communication service area. Also, The quality is guaranteed stablely to new business and ISP the requirement comes to become a multicasting quality guarantee mechanism which there is the reliability for a information communication and High-quality multimedia service. Like this, a multicast mechanism to be guaranteed must become air control End-to-End QoS for a service supply, a transmission delay a packet loss or requirement which the user requests guarantee and multicast Path-NET which there is the reliability must be provided. Therefor, we proposed IP base multicast new join the present the multicast mechanism of Probing packet foundation which there is the efficiently a linking acceptance, we used ns-2 simulator for the performance evaluation of the proposed.