• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.215-219
• /
• 2005

Generally, the mobile nodes in MANET have the limited power capacity available for actual communications. Thus, the power management is very important for packet routing or forwarding. Although MTPR, MBCR and MMBCR are proposed to treat the problem of power consumption, there have been few researches resolving the link breakdown that is occurred by the power exhaustion during transmission. In this sense, the reliable scheme should be required to ensure the routing connectivity. In this paper, we propose three schemes to enforce the routing connectivity. If the signal strength is dropped below a signal threshold, the candidate route is previously selected to prepare the link breakdown. Also, on multi-channel, we propose the lifetime increment scheme of a node that it manage its available power to the needed power of a new link. The simulation results show the enforcement of the link connectivity and the performance improvements of the delay time through the effective connection management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.159-169
• /
• 1994

A multichannel optical slotted ring network is designed using a wavelength division multiplexing(WDM) technique and photonic packet switching devices. The electronics speed bottleneck is removed out of the ring, which allows utilization of the full bandwidth for the optical fiber transmission medium. The ring channel adopts a slotted ring concept with a destination cell remove strategy for the eing access mechanism. The slot size in the ring is selected as the same as that of ATM based cell in order to be used as B-ISDN Access Networks. In this paper, we devised a mathematical method to measure the average transfer delay characteristics of the network. The analytical method turned out to yield accurate results over a broad range of parameters in comparison to simulation results. From the study, we observed the average transfer delay of the network as the network parameters vary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3131-3149
• /
• 2016

In-band Full-duplex (IBFD) wireless communication allows improved throughput for wireless networks. The current Half-duplex (HD) medium access mechanism Request to Send/Clear to Send (RTS/CTS) has been directly applied to IBFD wireless networks. However, this is only able to support a symmetric dual link, and does not provide the full advantages of IBFD. To increase network throughput in a superior way to the HD mechanism, a novel three-way handshaking access mechanism RTS/SRTS (Second Request to Send)/CTS is proposed for point to multipoint (PMP) IBFD wireless networks, which can support both symmetric dual link and asymmetric dual link communication. In this approach, IBFD wireless communication only requires one channel access for two-way simultaneous packet transmissions. We first describe the RTS/SRTS/CTS mechanism and the symmetric/asymmetric dual link transmission procedure and then provide a theoretical analysis of network throughput and delay using a Markov model. Using simulations, we demonstrate that the RTS/SRTS/CTS access mechanism shows improved performance relative to that of the RTS/CTS HD access mechanism.

• Journal of Broadcast Engineering
• /
• v.20 no.4
• /
• pp.533-544
• /
• 2015

Recently, most of the video services are usually transmitted in wireless networks. In networks environment, a packet of video is likely to be lost during transmission. For this reason, this paper proposes a new Error Concealment (EC) algorithm. For High Efficiency Video Coding (HEVC) bitstreams, the proposed algorithm includes Adaptive Prediction Unit-based Motion Vector Extrapolation (APMVE) and Boundary Matching (BM) algorithm, which employs both the temporal and spatial correlation. APMVE adaptively decides a Error Concealment Basic Unit (ECBU) by using the PU information of the previous frame and BM employing the spatial correlation is applied to only unreliable blocks. Simulation results show that the proposed algorithm provides the higher subjective quality by reducing blocking artifacts which appear in other existing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.777-784
• /
• 2006

In this paper, we propose the PON-based access network based on conventional TDM-PON architecture, which utilizes WDM wavelength channel and bandwidth dynamically. It is also described a dynamic MAC protocol in order to increase the number of subscribers and efficiency of resource utilization. Of particular importance in the proposed approach for MAC protocol is that the wavelength channel and time slot for up/downlink is dynamically allocated according to the required QoS level and the amount of data in data transmission, through the dedicated control channel between OLT and ONU. We evaluate the performance of average packet end-to-end delay in a statistical analysis and numerical analysis. In addition, through simulations with various traffic models, we verified the superior performance of the proposed approach by comparing with the results of other E-PONs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1211-1218
• /
• 2010

OSPF is the optimized routing protocol in wired network and considered as a tactical routing protocol in wireless tactical communication network. However because it is designed basically based on wired environment, it runs inadequately in wireless tactical environment: noise and jamming signal. So, we proposed new OSPF cost function to develop active routing protocol in wireless tactical communication network. In redefined cost function, there are four parameters that are relative transmission speed, link weight, router utilization, link average BER(Bit Error Rate). These parameters reflect wireless tactical characters. Also, we remodel the option field in Hello packet. It can help user to periodically check the link state. From the simulation result, it is shown that proposed OSPF is better than OSPF in jamming situation and has accumulative delay gain with dispersion of traffic load in entire network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.981-987
• /
• 2009

Recently, the study on wireless body area network for providing ubiquitous healthcare services has been actively done, including the standardization of the IEEE and others. Wireless body area network is usually configured in tree format using multi-hop communication mode due to the power limitation and the characteristics of human body. In this case, differently from existing sensor network, the wireless body area network tends to be disconnected due to the frequent movement of human body. The number of connections which can be supported at each node has some limitations due to the constraint imposed on power consumption. In this paper, we have proposed a heuristic algorithm for optimal selection of parent node with guaranteed QoS for a disconnected node, which considers the priority on packet transmission. Simulation has been performed to evaluate the performance of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.645-653
• /
• 2014

Recently, the ocean field researches such as offshore plant, ocean survey and underwater monitoring systems are garnering the attention from both academy and industry. However, the communication in underwater environment is very difficult because of the unique irregular features in water. This is the reason that the application of terrestrial protocols to the water environment is not proper. This paper proposes a routing algorithm that can enhance communication reliability by utilizing channel properties in underwater environment. We address two problems that lead to the poor communication performance, signal attenuation and multi-path problem in water. Overcoming these problems, the proposed algorithm ensures high packet delivery ratio and low transmission delay. Also, this paper evaluates the performance through simulation.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3479-3489
• /
• 2000

Most of the study on fairness control method for Distributed-Queue Dual-Bus(DQDB) have been performed under specific load types such as equal probability load types or symmetric load types. On Web-based internet enviroments client-server load types are more practical traffic patlerns than specrfic load types. In this paper, an effiective fairness control method to distribute DQDR network bandwidth fairly to all stations under a client-server load is proposed. In order to implement a dynamic bandwidth timing capabihty needed to distribute the bandwidth fairty at heavy loads, the proposed method uses two pararnetexs, one is an access hrnit to legulate each station's packet transmission and the other is the number of extra emply slots that are yielded to downstream stations. In point of implementation this mechanism is simpler and easier than Bandwidth Tuning Mechanism(BTM) that uses an intermediate pattern and an adptation function. Simulation results show that it outperforms othen mecharusms.