• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.336-342
• /
• 2017

Traffic can be localized by reducing the traffic load on the physical network by causing traffic to be generated at the end of the packet network. By localizing traffic, the IoT-based sensitive data-related security issues can be supported effectively. In addition, it can be applied effectively to the next-generation smart network environment without changing the existing network infrastructure. In this paper, a content priority scheme was applied to smart network-based IoT data. The IoT contents were localized to efficiently pinpoint the flow of traffic on the network to enable smart forwarding. In addition, research was conducted to determine the effective network traffic routes through content localization. Through this study, the network load was reduced. In addition, it is a network structure that can guarantee user quality. In addition, it proved that the IoT service can be accommodated effectively in a smart network-based environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.850-857
• /
• 2005

Sensor networks consist of sensor nodes with small size, low cost, lowpower consumption, and multi-functions to sense, to process and to communicate. The main issue in sensor networks has been focused on minimizing power consumption of sensors to maximize network life time. In some critical applications, however, the most important issue is to transmitsensing information to the end user (the sink node) with reliability. Reliable information forwarding using multiple paths in sensor networks (ReinForM) has been proposed to achieve desired reliability in the error-prone channel, but it needs increasing transmission riverhead as the channel error rate becomes high and the number of hops between the source node and the sink node increases. In this paper, we propose a reliable transmission rnechanissmusing intermediate source nodes in sensor networks (ReTrust) to reduce packet overhead while keeping the desired reliability. ReTrust has beenshown to provide desired reliability and reduced overhead via simulationsand analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.86-96
• /
• 2006

In recent year, EPON(Ethernet PON) system is expected to be more attractive solutions for high speed, broadband access networks in next generation access networks due to the conversionce of low-cost ethernet equipment and low-cost fiber infrastructure. Upstream channel control algorithm is essential to hare upstream bandwidth in EPON. In this paper, we suggest HUHG(High Utilization and Hybrid Granting) algorithm for supporting high bandwidth utilization and QoS for different service class. This algorithm improves bandwidth utilization as removing or diminishing idle time of upstream channel using characteristics of fixed EF(Expedited Forwarding) sub-cycle. The proposed algorithm also minimizes the packet delay and delay variation of EF class. We conduct detailed simulation experiments using OPNET to study the performance and validate the effectiveness of the proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.29-40
• /
• 2005

In this paper, we propose a Cluster-based Multicast Routing (CMR) suitable for mobile ad-hoc networks. The main features that our proposed method introduces are the following: a) mobility-based clustering and group based hierarchical structure in order to effectively support stability and scalability, b) group based mesh structure and forwarding tree concepts in order to support the robustness of the mesh topologies which provides limited redundancy and the efficiency of tree forwarding simultaneously, and c) combination of proactive and reactive concepts which provide low route acquisition delay and low overhead. The performance evaluation of the proposed protocol is achieved via modeling and simulation. The corresponding results demonstrate the Proposed multicast protocol's efficiency in terms of packet delivery ratio, scalability, control overhead, end-to-end delay, as a function of mobility, multicast group size, and number of senders.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.711-723
• /
• 2002

A finer granular scalable (FGS) version of ISO/IEC MPEG-4 video streaming is investigated in this work with the prioritized stream delivery over loss-rate differentiated networks. Our proposed system is focused on the seamless integration of rate adaptation, prioritized packetization, and simplified differentiation for the MPEG-4 FGS video streaming. The proposed system consists of three key components: 1) rate adaptation with scalable source encoding, 2) content-aware prioritized packetization, and 3) loss-based differential forwarding. More specifically, a constant-quality rate adaptation is first achieved by optimally truncating the over-coded FGS stream based on the embedding rate-distortion (R-D) information (obtained from a piecewise linear R-D model). The rate-controlled video stream is then packetized and prioritized according to the loss impact of each packet. Prioritized packets are transmitted over the underlying network, where packets are subject to differentiated dropping and forwarding. By focusing on the end-to-end quality, we establish an effective working conditions for the proposed video streaming and the superior performance is verified by simulated MPEG-4 FGS video streaming.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1328-1336
• /
• 2012

Compared to terrestrial RF communications, underwater acoustic communications have several limitations such as limited bandwidth, high level of fading effects, and a large underwater propagation delay. In this paper, in order to tackle those limitations of underwater communications and to make it possible to form a large underwater monitoring systems, we propose a hierarchical underwater network architecture, which consists of underwater sensors, clusterheads, underwater/surface sink nodes, autonomous underwater vehicles (AUVs). In the proposed architecture, for the maximization of packet delivery ratio and the minimization of underwater sensor's energy consumption, a hybrid routing protocol is used. More specifically, cluster members use Tree based routing to transmit sensing data to clusterheads. AUVs on optimal trajectory movements collect the aggregated data from clusterhead and finally forward the data to the sink node. Also, in order to minimize the maximum travel distance of AUVs, an Integer Linear Programming based algorithm is employed. Performance analysis through simulations shows that the proposed architecture can achieve a higher data delivery ratio and lower energy consumption than existing routing schemes such as gradient based routing and geographical forwarding. Start after striking space key 2 times.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.129-135
• /
• 2021

Greedy protocols show good performance in Vehicular Ad-hoc Networks (VANETs) environment in general. But they make longer routes causing by surroundings or turn out routing failures in some cases when there are many traffic signals which generate empty streets temporary, or there is no merge roads after a road divide into two roads. When a node selects the next node simply using the distance to the destination node, the longer route is made by traditional greedy protocols in some cases and sometimes the route ends up routing failure. Most of traditional greedy protocols just take into account the distance to the destination to select a next node. Each node needs to consider not only the distance to the destination node but also the direction to the destination while routing a packet because of geographical environment. The proposed routing scheme considers both of the distance and the direction for forwarding packets to make a stable route. And the protocol can configure as the surrounding environment. We evaluate the performance of the protocol using two mobility models and network simulations. Most of network performances are improved rather than in compared with traditional greedy protocols.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.626-636
• /
• 2009

In Mobile IP-enabled wireless LAN (WLAN), packet flows are corrupted due to the handoff of a mobile node (MN) at the link and network layers, which results in burst packet losses and can cause temporary buffer underflow in a streaming client at the MN. This transient behavior hurts time-sensitive streaming media applications severely. Among many suggestions to address this handoff problem, few studies are concerned with empirical issues regarding the practical validation of handoff options on the time-sensitive streaming media applications. In this paper, targeting seamless streaming over Mobile IP-enabled WLAN, we introduce a seamless media streaming framework that estimates accurate pre-buffering level to compensate the handoff latency. In addition, we propose a link-layer (L2) assisted seamless media streaming system as a preliminary version of this framework. The proposed system is designed to reduce the handoff latency and to overcome the playback disruption from an implementation viewpoint. A packet buffering and forwarding mechanism with L2 trigger is implemented to reduce the handoff latency and to eliminate burst packet losses generated during the handoff. A pre-buffering adjustment is also performed to compensate the handoff latency. The experimental results show that the proposed approach eliminates packet losses during the handoff and thus verify the feasibility of seamless media streaming over Mobile IP-enabled WLAN.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.9
• /
• pp.916-920
• /
• 2008

The personal workspace consists of user- specified computing environment such as user profile, applications and their configurations, and user data. Mobile computing devices (i.e., cellular phones, PDAs, laptop computers, and Ultra Mobile PC) are getting smaller and lighter to provide personal work-space ubiquitously. However, various personal work-space mobility solutions (c.f. VMWare Pocket ACE[1], Mojopac[2], u-PC[3], etc.) are appeared with the advance of virtualization technology and portable storage technology. The personal workspace can be loaded at public PC using above solutions. Especially, we proposed a framework called ubiquitous personal computing environment (u-PC) that supports mobility of personal workspace based on wireless iSCSI network storage in our previous work. However, previous u-PC could support limited applications, because it uses IRP (I/O Request Packet) forwarding technique at filter driver level on Windows operating system. In this paper, we implement OS-level virtualization technology using system call hooking on Windows operating system. It supports personal workspace mobility and covers previous u-PC limitation. Also, it overcomes personal workspace loading overhead that is limitation of other solutions (i.e., VMWare Pocket ACE, Mojopac, etc). We implement a prototype consisting of Windows XP-based host PC and Linux-based mobile device connected via WiNET protocol of UWB. We leverage several use~case models of our framework for proving its usability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.253-263
• /
• 2005

This paper proposed a mobile multicast technique to satisfy end-to-end QoS for various user requirements in mobile network environment. In order to provide seamless mobility, fast handoff technique was applied. By using L2 mobile trigger, it was possible to minimize remarkable amount of packet loss by delay occurred during handoff. To provide efficient multicast, concept of hierarchy was introduced to Xcast++, which results in a creation of HXcast++. HXcast++ optimized transfer path of multicast and reduced expensive multicast maintenance costs caused by frequent handoff. Suggestion of GMA (Group Management Agent) mechanism allows joining to group immediately without waiting IGMP Membership query during handoff. GMA mechanism will minimize the delay for group registration process and the resource usage due to delay of withdrawal process. And also use of buffering & forwarding technique minimized packet loss during generation of multicast tree. IntServ/RSVP was used to provide End-to-End QoS in local domain and DiffServ was used in global domain. To minimize reestablishment of RSVP session delay, extended HXcast++ control messages ware designed to require PATH message. HXcast++ proposed in this thesis is defined as multicast technique to provide end-to-end QoS and also to satisfy various user requirements in mobile network environment.