• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1011-1016
• /
• 2002

Colloidal particles of silica (100 nm in size) were electrostatically dispersed and adsorbed on a glass substrate coated with silica sol or alumina sol. Stability of the suspensions and microstructure of the adsorbed particle layers were discussed in terms of total potential energies between the particles and the substrate. Well-dispersed suspension resulted in a layer with densely packed and regularly arranged particles, whereas less stable suspension resulted in a porous layer with loosely packed and irregularly arranged particles. Despite repulsive interactions between the particles and the substrate coated with silica sol, the observed adsorption can be attributed to chemical bonds formed at the interface between the particle and silica sol. In contrast, the adsorption of the particles on the substrate coated with alumina sol formed a layer with strongly adhered and densely packed particles, due to large attractive interactions between the particles and alumina sol.

• Korean Journal of Veterinary Service
• /
• v.22 no.4
• /
• pp.377-383
• /
• 1999

Polymorphonuclear (PMN) leucocytes are fundamental importance to the body's defense mechanism and play a major role in the local and systemic reactions to infectious disease. Investigation of the physiological and pathological role of the various leucocyte subtypes in host defence mechanisms is dependent upon the isolation of adequate numbers of viable, pure leucocyte fractions. This report describes the separate frequency of PMN leucocytes both from buffy coat layer and from packed RBC layer when bovine peripheral blood was treated with various anti-coagulants such as acid-citrate-dextrose(ACD), ethyldiaminetetraacetic acid(EDTA), sodium citrate and heparin. The separate frequencies of PMN leucocytes from buffy coat layer was 60.4$\pm$9.6%(heparin), 56.8$\pm$11.8%(sodium citrate), 30.6$\pm$14.1%(ACD) and 6.2$\pm$3.7%(EDTA), in order. Those from packed RBC layer monitored with EDTA, ACD, sodium citrate and heparin was 85.0$\pm$4.7%, 84.3$\pm$5.5%, 83.8$\pm$6.5% and 76.3$\pm$7.7%, respectively. The Ficoll-hypaque(FH) density gradient method was used to remove a small part of lymphocytes and/or monocytes from leucocytes in packed RBC layer. With the result that it increased separate frequency of PMN leucocytes from EDTA(89.9$\pm$2.4%), ACD(89.5$\pm$3.6%), and sodium citrate(83.6$\pm$10.3%) than heparin(68.4$\pm$13.9%). These results indicate that the use of EDTA and ACD as anticoagulant Is suitable for the separation of PMN leucocytes from bovine peripheral blood, and that the FH density gradient method is able to increase the separate frequency of PMN leucocytes from packed RBC layer.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2491-2498
• /
• 2020

The paper concentrates on an experimental study of the pressure drop in double-layered packed beds formed by glass spheres, having the configuration of horizontal and vertical stratification. Both single-phase and two-phase flow tests are performed. The pressure drop during the test is recorded and the measured data are compared with those of homogeneous beds consisting of mono-size particles. The results show that for the horizontally stratified bed with fine particles atop coarse particles, the pressure drop in top layer is found higher than those of homogenous bed consisting of the same smaller size particles, while the measured pressure drop of bottom part is similar with those of similar homogenous bed. But for the homologous bed with upside-down structure, the stratification has little or no effect on the pressure drop of the horizontally stratified bed, and the pressure drop of each layer is almost same as that of homogeneous bed packed with corresponding spheres. Additionally, in vertically stratified bed, the pressure drops on the left and right side is almost equal and between those in homogeneous beds. It is speculated that vertically stratified structure may lead to lateral flow which redistributes the flow rate in different parts of packed bed.

• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.76-81
• /
• 2012

Removal of methane, benzene and toluene was evaluated in a lab-scale biocover packed with a soil mixture of forest soil and earthworm cast (75:25 weight ratio). The bacterial community in the biocover was characterized using quantitative real-time PCR and terminal restriction fragment length polymorphism. Methane was removed at the upper layer of the biocover (-0.1 ~ -0.4 m), where the oxygen concentration was remarkably lower. The average removal efficiencies for methane and benzene/toluene were 90% and 99%, respectively. The pmoA gene copy numbers, responsible for methane oxidation, in the upper layer were higher than those in the lower layer. While type I methanotrohs dominated the lower layer, type II methanotrophs, such as Methylocystis and Methylosinus, were noted to be predominant in the upper layer. Benzene and toluene were removed from the lower layer (-0.6 ~ -0.9 m) as well as the upper layer. Moreover, the tmoA gene copy number, responsible for benzene/toluene oxidation, seen in the upper layer was not significantly different from those seen in the lower layer. These results suggest that a biocover packed with a soil and earthworm cast mixture is a promising method which could be utilized for the control of methane and volatile organic compounds such as benzene and toluene.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3715-3721
• /
• 2013

In this study, the behavior of cells on the modified surface, and the correlation between the modified substrates and the response of cells is described. A close-packed layer of nano-sized silica beads was prepared on a coverslip, and the adhesion, proliferation, and migration of BALB/3T3 fibroblast cells on the silica layer was monitered. The 550 nm silica beads were synthesized by the hydrolysis and condensation reaction of tetraethylorthosilicate in basic solution. The amine groups were introduced onto the surfaces of silica particles by treatment with 3-aminopropyltrimethoxysilane. The close-packed layer of silica beads on the coverslip was obtained by the reaction of the amine-functionalized silica beads and the (3-triethoxysilyl)propylsuccinic anhydride treated coverslip. BALB/3T3 fibroblast cells were loaded on bare glass, APTMS coated glass, and silica bead coated glass with the same initial cell density, and the migration and proliferation of cells on the substrates was investigated. The cells were fixed and stained with antibodies in order to analyze the changes in the actin filaments and nuclei after culture on the different surfaces. The motility of cells on the silica bead coated glass was greater than that of the cells cultured on the control substrate. The growth rate of cells on the silica bead coated glass was slower than that of the control. Because the close-packed layer of silica beads gave an embossed surface, the adhesion of cells was very weak compared to the smooth surfaces. These results indicate that the adhesion of cells on the substrates is very important, and the actin filaments might play key roles in the migration and proliferation of cells. The nuclei of the cells were shrunk on the weakly adhered surfaces, and the S1 stage in which DNA is duplicated in the cell dividing processes might be retarded. As a result, the rate of proliferation of cells was decreased compared to the smooth surface of the control. In conclusion, the results described here are very important in the understanding of the interaction between implanted materials and biosystems.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.249-254
• /
• 2022

To achieve high-performance colloidal quantum dot light-emitting diodes (QD-LEDs), the use of a densely packed QD film is crucial to prevent the formation of leakage current pathways and increase in interface resistance. Spin coating is the most common method to deposit QDs; however, this method often produces pinholes that can act as short-circuit paths within devices. Since state-of-the-art QD-LEDs typically employ mono- or bi-layer QDs as an emissive layer because of their low conductivities, the use of a densely packed and pinhole-free QD film is essential. Herein, we introduce the Langmuir-Blodgett (LB) technique as a deposition method for the fabricate densely packed QD films in QD-LEDs. The LB technique successfully transfers a highly dense monolayer of QDs onto the substrate, and multilayer deposition is performed by repeating the transfer process. To validate the comparability of the LB technique with the standard QD-LED fabrication process, we fabricate and compare the performance of LB-based QD-LEDs to that of the spin-coating-based device. Owing to the non-destructiveness of the LB technique, the electroluminescence efficiency of the LB-based QD-LEDs is similar to that of the standard spin coating-based device. Thus, the LB technique is promising for use in optoelectronic applications.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1133-1137
• /
• 2011

Ordered array of gold nanoparticles (Au NPs) over ITO glass was investigated in terms of ITO pretreatment, particle size, and diamines with different chain length. Owing to the indium-tin-oxide (ITO) layer coated on the glass, the substrate surface has a limited number of hydroxyl groups which can produce functionalized amine groups for Au binding, which resulted in the loosely-packed array of Au NPs on the ITO surface. Diamine ligand as a molecular linker was introduced to enhance the lateral binding of adjacent Au NPs immobilized on the amine-functionalized ITO glass, consequently leading to the densely-packed array of Au NPs over the ITO substrate. The molecular bridging effect was strengthened with the increase of chain length of diamines: C-12 > C-8. The packing density of small Au NPs (< 40 nm) was significantly increased with the increase of C-8 diamine, but large Au NPs (> 60 nm) did not produce densely-packed array on the ITO glass even for the dosage of C-12 diamine.

• Solar Energy
• /
• v.19 no.4
• /
• pp.45-53
• /
• 1999

This report Introduces a total heat exchanger in a solar air-conditioning system using Lithium Chloride(LiCl) solution. The hot and humid outside air is cooled and dehumidified by LiCl solution that is sprayed on the packed layer of the total heat exchanger. LiCl solution once diluted is concentrated again in a regenerator using solar energy. Three types as the packed materials were used in this experiment and the dehumidification performance was evaluated by the value of $k_xa(kg/h{\cdot}m^3{\cdot}{\Delta}x)$, overall mass transfer coefficient based on a humidity ratio potential difference, the influence of inlet LiCl solution flow rate, air flow rate, packed layer height on $k_xa$ was investigated. It was found that air flow rate, LiCl solution flow rate, packed layer height for all types had a great influnce on the value of $k_xa$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.63-66
• /
• 2006

We describe a unique process based on colloidal self-assembly that results in a uniform (almost hexagonally close-packed) layer of liquid crystal domains over large areas leading to single-substrate cholesteric LCDs with low switching voltages, excellent contrast, and high brightness. Extension to guest-host LCDs is also discussed.

• The Korean Journal of Malacology
• /
• v.11 no.1
• /
• pp.70-77
• /
• 1995

The purpose of this study is to determine the differences of the conchiolin layer, prismatic layer and nacreous layer deposited within the shell of the freshwater family Unionidae. shether they possess species-specific characteristics and differences of the microstructure of these layers, A Scanning electron microscopic obwervations were conducted on seven species. The results indicate that all species possess thin and homogeneous layers within the periostracum. The prismatic layers of these species were composed of ednsely packed prisms. The prismatic layers of the shell in six species were typical shape of prisms. especially Inio douglasiae and Lamprotual gottschei. But, in Unio douglasiae sinuolatus, it was irregular and oblique prism shape.The nacreous layer of weven unionids characterized by possession of three types by lamillae shape: thin and homogeneous on genus Anodonta(0.4 pm size of lamella), Unio(1.3pm) and Lamprotual (1.7pm), homogeneous in shape and irregular in size of lamillae in Lanceolaria(1.0 pm)and irregulat in shape and size in Solenaia(0.2-0.4 pm). The microstructure of the naceous layer may be useful as a taxonomic character at the generic level.