• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.

• Carbon letters
• /
• v.11 no.1
• /
• pp.13-21
• /
• 2010

Coconut shell activated carbon (CSAC) was investigated for its ability in the removal of two neutral chlorinated organic compounds, namely trichloroethylene (TCE) and dichloromethane (DCM) from aqueous solution using a packed bed column. The efficiency of the prepared activated carbon was also compared with a commercial activated carbon (CAC). The important design parameters such as flow rate and bed height were studied. In all the cases the lowest flow rate (5 mL/min) and the highest bed height (25 cm) resulted in maximum uptake and per cent removal. The experimental data were analysed using bed depth service time model (BDST) and Thomas model. The regeneration experiments including about five adsorption-desorption cycles were conducted. The suitable elutant selected from batch regeneration experiments (25% isopropyl alcohol) was used to desorb the loaded activated carbon in each cycle.

• Advances in environmental research
• /
• v.3 no.3
• /
• pp.231-251
• /
• 2014

The present study examines the phosphate adsorption potential and behavior of mixture of Ground Burnt Patties (GBP), a solid waste generated from cooking fuel used in earthen stoves and Red Soil (RS), a natural substance in fixed bed column mode operation. The characterization of adsorbent was done by Proton Induced X-ray Emission (PIXE), and Proton Induced ${\gamma}$-ray Emission (PIGE) methods. The FTIR spectroscopy of spent adsorbent reveals the presence of absorbance peak at $1127cm^{-1}$ which appears due to P = O stretching, thus confirming phosphate adsorption. The effects of bed height (10, 15 and 20 cm), flow rate (2.5, 5 and 7.5 mL/min) and initial phosphate concentration (5 and 15 mg/L) on breakthrough curves were explored. Both the breakthrough and exhaustion time increased with increase in bed depth, decrease in flow rate and influent concentration. Thomas model, Yoon-Nelson model and Modified Dose Response model were used to fit the column adsorption data using nonlinear regression analysis while Bed Depth Service Time model followed linear regression analysis under different experimental condition to evaluate model parameters that are useful in scale up of the process. The values of correlation coefficient ($R^2$) and the Sum of Square Error (SSE) revealed the Modified Dose Response model as the best fitted model to the experimental data. The adsorbent mixture responded effectively to the desorption and reusability experiment. The results of this finding advocated that mixture of GBP and RS can be used as a low cost, highly efficient adsorbent for phosphate removal from aqueous solution.

• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.249-257
• /
• 1979

Using the whole cell immobilized glucose isomerase which was prepared in the previous work (Korean J. Food Sci. & Technol., 11(3), 192 (1979), the specific activity of the immobilized enzyme was 48.1 units in the batch reaction system and 114 units in the continuous reaction system per g of matrix, respectively. In the continuous reactor the voidity was 0.36, which was suitable for the packed bed reactor. This immobilized enzyme showed a good operational stability of 115 days of half life which was sufficient for the continuous operation. The experimental result showed that 55 % of the substrate was converted to the product in the packed bed reactor. The productivity was dependent on the flow rate, column geometry, enzyme loading, and substrate concentration. An intrapaticle diffusion was observed by the effectiveness factor of 0.75 and interparticle diffusion by the decrease of Km' with increasing the superficial velocity.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.66-74
• /
• 1997

Influence of the axial dispersion on immobilized enzyme catalytic bed was investigated in order to examine the kinetic behavior of the biocatalysis. The enzyme employed in this study was the tyrosinase(EC 1.14.18.1) immobilized on carbon support : this system requires two substrates of phenol and oxygen. This enzyme has potential application for phenol degradation in waste water. A simulated reactor was a packed-bed reactor of 2.54cm in diameter and 10cm long, loaded with the immobilized carbon particle with an average diameter of $550{\mu}m$. A phenol feed in the strength of 55.5mM(5220ppm) was used to observe the behavior of the immobilized enzyme column at three different dissolved oxygen levels of 0.08445mM(2.7ppm), 0.1689mM(5.4ppm) and 0.3378mM(9.5ppm) with the flow rates in the range of 60(1mL/s) to 180mL/min(3mL/s). Examination of the Biot number and Damkolher numbers of the immobilized system enables us to eliminate the contribution of external mass transfer to set of differential equations derived from the dispersion model. Solution of the equation was finally obtained numerically with the application of the Danckwert boundary conditions and the assumed zero-and first order rates on the non-linear two substrate enzyme kinetics. Higher conversion of phenol was observed at the low flow rates and at the higher oxygen concentration. Comparison of axial dispersion and plug flow model showed that no detectable difference was observed in the column outlet conversion between the axial and the plug flow models which was in complete agreement with the previous studies.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.3
• /
• pp.236-241
• /
• 2005

A decolorization process using ion exchange chromatography was developed to refine rhEGF as a cosmetic ingredient. A macroreticular resin (D314) was selected, with respect to its high decolorization rate and recovery yield of rhEGF, and the operational conditions of the decolorization process optimized. The optimum conditions were as follows: the rhEGF effluent was ion exchanged at a flow rate of 60.0mL/h, with an effluent pH 5.0, using a chromatographic column (i.d. 16mm) packed with D314, with a 7.5cm in bed height. The decolorization process was carried out under the optimum conditions, and halted when the effluent volume reached 350mL, giving a decolorization rate and recovery yield of rhEGF higher than 67 and $80\%$, respectively. When the decolorization rate exceeded $67\%$, the final product turned out to be white or light yellowish, which was to the satisfaction of the cosmetic standard.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.157-162
• /
• 1988

In order to study of practical purpose of immobilized Mucor spp L42 milk clotting enzyme on activated succimylamino-propyl glass beads with glutaraldehyde in continuous curd coagulation, acidified milk(pH5.6, $8^{\circ}C$) was treated through reactor packed with immobilized beads, and warmed at $30^{\circ}C$ and allowed to coagulation for the determination of enzyme stability, deactivation of milk clotting ability by continuous reaction, the beads treatment conditions, and contact time of milk and beads in reactors. The results obtained were summarized as follow ; 1) After 3 month's storage, activity of immobilized Mucor spp L42 milk clotting enzyme in 0.2M phosphate buffer(pH 4.6) with 0.06% sodium azide was only 80% of initial activity. 2) Milk clotting activity of the beads was decreased by continuouse exposure on acidified skim milk. Nitrogen accumulation on the beads paralled loss of the activity in initial reaction stage. 3) After 6 hours continuous treatment of the beads at 60 sec/ml surface time, the milk-clotting activity of the beads was about 70% of initial activity. 4) Bead reactor and shaking bed reactor were more effective than column reactor on continuouse skim milk coagulation.