• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.390-395
• /
• 2011

The main purpose of ice model basin is to assess and evaluate the performance of the Arctic ships and offshore structures because the full-scale tests in ice covered sea are usually very expensive and difficult. There are various ice conditions, such as level ice, brash ice, pack ice and ice ridge, in the real sea. To estimate their capacities in ice tank accurately, an appropriate model ice sheet and prepared ice conditions copied from actual sea ice conditions are needed. Pack ice is a floating ice that has been driven together into a single mass and a mixture of ice fragments of varying size and age that are squeezed together and cover the sea surface with little or no open water. So Ice-class vessels and Icebreaker are usually operated in pack ice conditions for the long time of her voyage. The most ice model tests include the pack ice test with the change of pack ice concentration. In this paper, the effect of pack ice size and channel breadth in pack ice model test is conducted and analyzed. Also we presented some techniques for the calculation of pack ice concentration in the model test. Finally, we developed a new model test methodology of pack ice condition in square type ice tank.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.491-498
• /
• 2018

The cost evaluation for voyage route planning in an ice-covered sea is one of the major topics among ship owners. Information of the ice properties, such as ice type, concentration of ice, ice thickness, strength of ice, and speed-power relation under ice conditions are important for determining the optimal route in ice and low operational cost perspective. To determine achievable speed at any designated pack ice condition, a model test of resistance, self-propulsion, and overload test in ice and ice-free water were carried out in a KRISO ice tank and towing tank. The available net thrust for ice and an estimation of the ice resistance under any pack ice condition were also performed by I-RES. The in-house code called 'I-RES', which is an ice resistance estimation tool that applies an empirical formula, was modified for the pack ice module in this study. Careful observations of underwater videos of the ice model test made it possible to understand the physical phenomena of underneath of the hull bottom surface and determine the coverage of buoyancy. The clearing resistance of ice can be calculated by subtracting the buoyance and open water resistance form the pre-sawn ice resistance. The model test results in pack ice were compared with the calculation results to obtain a correlation factor among the pack ice resistance, ice concentration, and ship speed. The resulting correlation factors were applied to the calculation results to determine the pack ice resistance under any pack ice condition. The pack ice resistance under the arbitrary pack ice condition could be estimated because software I-RES could control all the ice properties. The available net thrust in ice, which is the over thrust that overcomes the pack ice resistance, will change the speed of a ship according to the bollard pull test results and thruster characteristics (engine & propulsion combination). The attainable speed at a certain ice concentration of pack ice was determined using the interpolation method. This paper reports a procedure to determine the attainable speed in pack ice and the sample calculation using the Araon vessel was performed to confirm the entire process. A more detailed description of the determination of the attainable speed is described. The attainable speed in 1.0 m, 90% pack ice and 540 kPa strength was 13.3 knots.

• Carbon letters
• /
• 제4권1호
• /
• pp.24-30
• /
• 2003

In this study, densified 4D carbon/carbon composites were made from carbon fiber and coal tar pitch through the process of pressure impregnation and carbonization and then followed by carbonization and graphitization. To improve the oxidative resistance of the prepared carbon/carbon composites, the surface of carbon/carbon composites was coated on SiC by the pack cementation method. The SiC coated layer was created by depending on the constitution of pack powder, and reaction time of pack-cementation. The morpology of crystalline and texture of these SiC coated carbon/carbon composites were investigated by XRD, SEM/EDS observation. So the coating mechanism of pack-cementation process was proposed. The oxidative res istance were observed through the air oxidation test, and then the optimal condition of pack cementation was found by them. Besides, the oxidative mechanism of SiC formed was proposed through the observation of SiC coated surface, which was undergone by oxidation test.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.96-102
• /
• 2016

7톤 엔진 시험 전에 엔진 시동/정격구동/종료 특성을 확인하고자 나로우주센터 터보펌프 실매질 시험설비에서 파워팩 시험을 수행하였다. 가스발생기 연소실의 동압은 0.2 bar이하로 측정되어 연소 불안정을 발생하지 않았고, 터보펌프에 장착된 RPM 및 가속도 센서 신호 분석 결과, 예측 RPM 범위 안에서 파워팩 시험이 안정하게 수행되었다는 것을 확인하였다.

• 한국잠사곤충학회지
• /
• 제45권1호
• /
• pp.58-65
• /
• 2003

수용성 세리신의 전자공여능을 측정하고, FT-IR, DSC 등의 분석을 통하여 물리 화학적 특성을 조사하고 부직포에 세리신을 처리하여 pack test 실시하여 다음과 같은 결론을 얻었다. 1. 전자공여 작용의 항산화 실험 결과 high>low>PK>PP>PA 순서로 전자공여능이 높았다. 2. FT-IR 분석 결과 난용성 세리신에 나타난 3285 $cm^{-1}$ /에서의 피크가 수용성 세리신에서는 단파장쪽으로 이동되었고, 가수분해가 되어 분자량이 작을수록 아미드 II밴드의 크기는 작아지고 단파장쪽으로 이동하는 현상이 나타났다. 3. DSC 분석 결과 모든 세리신에서 20$0^{\circ}C$와 30$0^{\circ}C$부근에서 흡열피크가 나타났으며, 난용성 세리신의 경우 25$0^{\circ}C$부근에서 흡열 피크가 하나 더 나타나고 30$0^{\circ}C$부근의 흡열피크는 수용성 세리신보다 높은 온도에서 나타났다. 4. 백도는 low>high>PP>PA>PK>IN 순서로 높았고, 황도는 PK>PA>PP>low>high 순서로 높았다. 5. Pack test 결과 세리신 처리된 부직포로 얼굴에 pack 처리한 경우는 처리 전에 비하여 번들거림이 줄어들고 피부가 편평한 상태가 되었다.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4012-4017
• /
• 2010

이 연구에서는 팩 말뚝과 모래다짐말뚝의 전단강도 특성을 비교하기 위해 모래-팩-점토 복합토 및 모래-점토 복합토를 인위적으로 치환율($a_s$) 10%, 20%로 재성형하여 구속압력을 변화시켜가며 삼축압축시험(CU Test)을 실시하였다. 시험결과 모래-점토 복합토에 비해 모래-팩-점토 복합토의 강도가 치환율 10% 및 20% 모두에서 훨씬 크게 측정되어 모래다짐말뚝보다 팩말뚝이 큰 지지력을 갖는다는 것을 확인하였다.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.1-8
• /
• 2019

본 논문에서는 18650 원통형 NCA 리튬이온 배터리로 구성된 고출력 직렬 배터리로 다양한 C-rate의 전기적 특성을 테스트한다. 테스트를 통해 추출한 14S1P 배터리 팩의 방전 용량 데이터와 4S1P 배터리 팩의 EV cycle 데이터를 통해 C-rate의 변화에 따른 전기적 특성을 분석한다. 분석을 통해 얻은 데이터를 기반으로 C-rate에 따른 방전용량 실험의 셀 간 전압 편차와 EV cycle 실험의 셀 간 전압 편차를 다중선형회귀 모델로 추정하여 선형적인 특징을 가진 데이터와 비선형적인 특징을 가진 데이터에 대한 각각의 추정성능을 검증한다. 모델의 추정성능을 검증하기 위해 추정 데이터와 실제 데이터의 RMSE를 구해 알고리즘의 정확성을 평가한다. 논문의 결과는 14S1P 배터리 팩의 방전 용량의 셀 간 전압 불균형과 4S1P 배터리 팩의 EV cycle의 셀 간 전압 불균형 중 선형적인 데이터인 방전 용량의 셀 간 불균형 데이터의 추정 성능이 더 뛰어난 것을 검증하는데 기여한다.

• Carbon letters
• /
• 제2권1호
• /
• pp.27-36
• /
• 2001

The pack-cementation process is the method which is formed SiC coating layer to improve weak oxidation properties of CFRCs (carbon fiber-reinforced carbons). This method develops the anti-oxidation coating layer having no dimensional changes and good wetting properties. In this study to improve the oxidative resistance of the prepared 4D CFRCs, the surface of CFRCs is coated by SiC using pack cementation method. The mechanical properties of SiC-coated 4D CFRCs are measured by the 3-point bending test, and their ablation properties are investigated by the arc torch plasma test. From the results, it is found that both mechanical and ablation properties of SiC-coated 4D CFRCs are much better than bare CFRCs.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.787-798
• /
• 2013

This paper proposes a special power circuit topology and its corresponding control strategy for an energy recovery power accumulator battery pack testing system (PABPTS), which is particularly used in electric vehicles. Firstly, operation principle and related parameter design for the system are illustrated. Secondly, control strategy of the composite power converter for PABPTS is analyzed in detail. The improved scheme includes a high accuracy charge and discharge current closed loop. active power reference for the grid-side inverter is provided by the result of multiplication between battery pack terminal voltage and test current. Simulation and experimental results demonstrate that the proposed scheme could not only satisfy the requirements for PABPTS with wide-range current test, but also could recover the discharging energy to the power grid with high efficiency.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.49-56
• /
• 2017

Recently, many research works on the icebreaking vessels have been published as the possibility of passing Arctic routes has been increasing. The model ship test on the pack ice model in the ice basin is actively carried out as a way to investigate the performance of icebreaking vessels. In this test, the concentration of pack ice is important since it directly affects the performance. However, it is difficult to measure the concentration because not only the pack ice has uneven shape but also it keeps floating around in the basin. In this paper, an algorithm to identify the concentration of pack ice is introduced. From a digital image of pack ice obtained in the ice basin, the goal is to measure the area of pack ice using an image processing technique. Instead of the general global binarization that yields numerical errors in this problem, a local binarization technique, coupled with image subdivision based on the quadtree structure, is developed. The concentration results obtained by the developed algorithm are compared with the manually measured data to prove its accuracy.