• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.95-101
• /
• 2011

According to recent technological developments in high-power LEDs, the stage lighting is one of most important areas to apply power LED system. Moving light for color rendering of stage uses the RGBW(red, green, blue, white) color mixing method. LED moving light system needs to have a wide range of dimming control as enough to operate at very low power. Also LED dimming system should not be induced color-shift and flicker in camera. This paper is experimentally verified the LED Moving Light driving circuit of 200Watt level designed to satisfy the above characteristics which applied the DC current-controlled and PWM mixed dimming method.

• Journal of Information Display
• /
• v.11 no.4
• /
• pp.173-181
• /
• 2010

In this paper, light-emitting-diode (LED) backlight driving circuits and dimming method for medium-sized and large liquid crystal displays (LCDs) are proposed. The double loop control method, the intelligent-phase-shifted PWM dimming method, the fast-switching current regulator, and the current matching techniques are proposed to improve not only the current regulation characteristics and the power efficiency but also the current matching characteristics and the transient response of the LED current. The brightness of the backlight using the proposed local dimming method was determined from the histogram of the local block to reduce the power consumption of the backlight without image distortion. The measured maximum power efficiency of the LED backlight driving circuit for medium-sized LCDs was 90%, and the simulation results showed an 88% maximum power efficiency of the LED backlight driving circuit for large LCDs. The maximum backlight power-saving ratio of the proposed dimming method was 41.7% in the simulation with a high-contrast image. The experiment and simulation results showed that the performance of LEDs as LCD backlight units (BLUs) improved with the proposed circuits and method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.890-891
• /
• 2008

본 논문에서는 37인치 LCD TV의 패널 전원 공급용 회로로 사용되는 120W급 LLC 공진형 컨버터의 정상 상태 해석을 하였다. 특히, 종래와 달리 TV의 소비 전력 절감을 위해 넓은 범위로 동작하는 램프의 PWM Dimming 기능 동작시의 넓은 동작 영역에서의 공진형 컨버터의 정상 상태 해석을 하였다. TV SET의 동작 중 발생할 수 있는 공진형 컨버터 회로의 전단 회로인 Power Factor Correction 회로의 전압 변동과 또한 넓은 범위로 동작하는 램프의 PWM Dimming 기능 동작시의 부하 변동을 고려하여 LLC 공진형 컨버터의 정상 상태 해석을 하였다. 넓은 범위의 입출력 조건에서도 안정적으로 동작하는 컨버터 회로에 대한 이론적 분석과 실험을 통해 적용된 회로의 신뢰성과 우수성을 확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4740-4744
• /
• 2012

The purpose of this paper was to make a LED light control module using Zigbee. The module was made so that brightness of the LED light changes according to the ambient brightness. A 8-bit microcontroller was used to implement the module to enable LED dimming and wireless light intensity measurement. Using the proposed method, power consumption can be improved by up to 48% on average, with 3.4-0.4W changes in power. The measured ambient light intensity values are converted from analog to digital and outputted as a PWM waveform. According to the output waveform and changes in the current outputted from the LED driver, the brightness of the LED light is controlled. Also, Zigbee with close-range wireless communication capabilities was used to enable wireless transmission of light intensity measurements.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.162-163
• /
• 2010

본 논문에서는 LED조명의 휘도조절을 위해 PWM dimming시 발생하는 LED전류의 과도 상태제거를 위한 전류 제어 기법을 제안한다. 제안된 LED전류 제어 기법은 과도상태가 존재하지 않으므로 Dimming신호의 동작 시비율이 매우 작은 영역에서도 전류 제어를 통해 낮은 휘도를 정밀하게 표현할 수 있다. 또한 전류의 Overshoot이 발생하지 않으므로 휘도를 일정하게 유지할 수 있는 장점을 가진다. 본 논문에서는 제안된 LED전류 제어 기법의 동작원리를 설명하고, LED휘도 조절을 위한 전원시스템을 구현하여 PSIM 을 통해 제안된 기법의 타당성 및 우수성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1956-1957
• /
• 2011

본 연구는 White LED를 이용하여 주변 밝기 변화에 빠르게 적응하는 퍼지 뉴로 Dimming Control System을 설계한다. 본 논문에서는 방사형기저함수 신경회로망(Radial Basis Function Neural Network: RBFNN)을 설계하여 실제 White LED Dimming Control System에 적용시켜 모델의 근사화 및 일반화 성능을 평가한다. 제안한 모델에서의 은닉층은 방사형기저함수를 사용하여 적합도를 구현하였고, 후반부의 연결가중치는 경사하강법을 사용한다. 이때 멤버쉽 함수의 중심점은 HCM 클러스터링 (Hard C-Means Clustering)을 적용하여 결정한다. 연결가중치는 4가지 형태의 다항식을 대입하여 출력을 평가하였다. 최종 출력의 최적화를 위하여 PSO(Particle Swarm Optimization)을 이용하여 은닉층 노드수 및 다항식 형태를 결정한다. 본 논문에서 제안한 LED Dimming Control System은 Atmega8535를 사용하여 PWM 제어 방식을 사용하고, 조도계(Cds)를 이용하여 LED의 밝기에 따른 주변의 밝기를 감지하여 조명에 적응시키는 방법을 적용하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.247-253
• /
• 2011

In this paper, we propose and implement the automated brightness control system using distance measuring sensor for reducing the power consumption of emotional lighting device. In order to reduce the power consumption of emotional lighting devices which express continuous color changes, the proposed device measures the distance continuously using ultrasonic sensor and by using this, it also performs PWM Dimming control. The lighting device is composed of micro controller, LED driver, ultrasonic sensor, communication module and so on. And the device performs the real time brightness control by adapting the measured distance information from ultrasonic sensor to PWM signals. From this experiment, we implement the active lighting system which minimizes unnecessary power consumption during user's absence by adapting existing energy reducing techniques.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1149-1152
• /
• 2005

The frequency of inverters for driving multi-lamp backlights for LCD TV was synchronized to reduce noise from lamps and noise generated from PWM dimming.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.504-513
• /
• 2009

This paper proposes the new type LED driver modularization for illumination LED driver. The proposed LED driver circuit insulates a hot GND of AC input power and a cold GND of LED driver part by using a fly-back converter. In order to control easily the current of the LED, the fly-back converter is operated in the discontinuous mode with excellent dynamic characteristics, and the characteristics of the LED are verified after the closed loop control is performed using a KIA2431. The LED driver module allows the wide AC power input ranges and realizes the burst dimming function which directly regulates a PWM control IC. This paper describes the operation principle of the LED driver module and it is proved the usefulness through the real model with experimentation. Besides, this paper proposes the multi-channel LED driver which the miniaturized and modularized LED driver module are connected by parallel, and verified its propriety by experiments.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.